is it possible to change the MAC address on the airport express ? most routers allow the address to be modified over the admin panel but I can't find a way to do it with the airport.
View 11 RepliesI have a MacBookPro running OSX 10.5.8 and I've been connecting wirelessly with my NETGEAR Wireless N Router (WNR2000) for the past week but then all of a sudden I'm not able to connect to the internet anymore. I keep getting this message "you have a self assigned IP Address but may not be able to connect to the internet."
I've done all the basic troubleshooting with resetting the Router to factory setting and also unplugged and restarted my modem and Router and laptop.
I've called my ISP (Time Warner Cable) and they've gone through the same troubleshooting with me. I know my internet works as I've been using Ethernet and it works. The person over at Time Warner and she said that my internet and even Netgear wireless router is giving the right IP address but when i checked my network settings on my computer, the IPv4 address is this: 169.254.52.45.
I've checked on various sites and i found that IP that starts with 169.254.xxx is the default setting for airports. I don't know how to set the right IP on my airport on my laptop? It's annoying because I've tried setting my airport on my laptop USING DHCP with manual address with the correct IP from my ethernet connection but doesn't seem to work. I'm at the end of the ropes before smashing my router and computer to a million pieces.
i am trying to extend a network with an airport express but the airport express cannot get a valid IP address and flashes amber.
my setup is as follows: netgear router/modem which handles PPPoE connected via ethernet to time capsule which handles the wireless network.
time capsule is working fine and has a valid IP address but airport express doesn't.
i have checked 'allow this network to be extended' on the TC, and connection sharing is in bridge mode.
i wonder if someone could help me troubleshoot this
I have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS X on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
MBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
View 4 Replies View RelatedI currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
View 2 Replies View RelatedI recently moved into a new apartment that has an Airport Express connected to a cable modem. The network does not have a password. I want to put a password on it so that not everyone in the building can use our internet.
When I connect to the Airport via the Airport Utility, it recognizes the Airport, but asks for a password when I try to configure it. I tried doing a soft reset on the Airport, but it didn't change anything. Are there two passwords for an Airport? If so, how can I bypass the second one? The "Resetting Airport Express" page at [URL] doesn't answer this question. Do I need to do a hard reset? If so, is there anything I need to know about that? We no longer have any of the original literature that came with the product.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
View 4 Replies View RelatedI have a MB and MBP and they both have the same IP address, so the MBP won't work on our wireless network anymore.
How can I cahnge the IP address? We have a netgear router and are with Jersey Telecoms.
I've been searching all over the interwebs and I can't seem to find a way to change the MAC address of my MBP wireless for Leopard 10.5.6. It appears that some worked with earlier versions of 10.5 but changing it has been "disabled?" somehow with the latest update.
Anyone know anything about it? I tried using instructions from sites like:[URL]
Still doesn't work for me.
I'm getting a new iMac delivered on Tuesday, but I'm in student accommodation, and the internet (which costs �90 a pop!) is set to a certain mac address, namely the one for my old macbook.
I know you can change a mac address (I think, based on some searching that it's with the
Code:
sudo ifconfig en0 ether xx:xx:xx:xx:xx:xx command), but does that change it change it permanently or just make it look different? Say, for example, if I had to reformat, or say, boot into windows with boot camp, would I need to change it again or would it be set permanently?
How do I change my ip address on Mac OS X Snow Leopard? I have read places that you can apparently type something in the terminal and it changes it? How do I do this and would it be changed forever or revert when I restart my laptop?
View 5 Replies View RelatedI dont know much about DNS and etc. What is it? And is it safe if i change it bc my internet is so slow on safari! I found a site that is telling me to change my DNS but before i do that... I want to make sure it's not some kind of virus thing. Can a virus enter my computer via that DNS?
View 3 Replies View Relatedi need to change my mobileme email address
View 1 Replies View RelatedI had to change my email from a yahoo account to gmail. How can I change my iCloud ID to match that new email.
I can't find any place to change the email address in iCloud.
I am running Yosemite on my iMac computer.
Info:
iMac, OS X Yosemite (10.10.1)
I have a MBP 15, the computer service of my company has pointed the server address of Mac Software Update to an internal server. It makes me cannot run Software Update at any place but my office. How can I change the address back to the server at [URL]?
View 6 Replies View RelatedI've consulted Help but could not find the answer to this... Is it possible to change the order of the fields in the Address Book? E.g. using the Template?
View 1 Replies View RelatedCan anyone explain to me Airport Extreme and Airport Express and their functions?
View 8 Replies View RelatedI have an Airport Express and when I go to configure it it does not appear on the list of available networks. I have the AC plugged in and ethernet cable from my router attached to it. I get nothing! The light on the AE is green but my iBook G4 can't see it. From what I've read this looks to be a fairly simple plug and play operation.
View 8 Replies View RelatedI have an Airport Extreme Base Station and a Airport Express sitting in boxes, never being used.
Our house is already equipped with wireless connection through our DSL and Linksys router. (was in place when I moved in)
I was thinking of getting a time capsule for back up, but not sure if I could get it up and running with the Linksys or not.
Can I use my Express as an extender for using my laptop in the backyard? will it talk nicely with the Linksys?
What are your suggestions/opinions? I hate to see my beautiful Apple products sitting in boxes.
I'm looking for a repeater of sorts, similar to the Airport express, but just not as expensive.
The issue is that my macbook drops out randomly, sometimes it just goes through phases where it drops the connection about 20 times in 30 minutes.
The issue is that the modem-router cannot be moved as its phone line based, so I think my last option is a repeater. The Express seemed ideal as its a small, simple unit that can be plugged straight into the socket, which would be perfect for where I wish to place it - is there a cheaper alternative?
Just tried to set up my Airport Express but it shows a flashing yellow light (meaning it isn't connected to my router) and it isn't even recognised by Airport Utility!
View 1 Replies View RelatedI have a Airport Express 802.11n (AE) early 2008 S/N 6F8437ZJZP8 working since 2 years, I use it to connect to printers an run it on wifi. Recently stopped working the green light was steady yellow. I search the forum did a soft reset, hard reset, factory default reset, etc and Is not working. Now all it does is when is connected to the outlet stays on yellow for few minutes and then shut off by it self. I even tried to connect by ethernet cable but when I run it my mac says nothing is connected to the cable and is a new one. When I tried to connect my mac can't find the devise true the airport utility. I have a mac laptop G4 12" Mac OS X 10.4.11 The airport utility is version 5.4.2 and both are up to date when I run the update application.
View 1 Replies View RelatedThis is driving me crazy. I bought a Belkin F5D9050 802.11g compatible usb wireless card, and it will not recognize my airport express!
I have changed the settings in windows, and know the drivers are correct, it just won't find it as a online router/hub.
It says the network is unavailable, and there was an issue setting up wireless, it is like the windows wireless setup and the card are competing, so I cancelled the windows g setup and still nothing.
I am running SP 3 for XP, and tried chatting Belkin support and no one knows.
I installed Airport Utility, and etc and still doesn't connect.
The only flicker I had was when I went into my mac and tried creating another network, and then it signaled a device, but would not connect.
I have two airport express base stations. One upstairs connected to my dsl router and I can see the status of that one in the airport utility. I plugged the printer and speakers into another downstairs and plugged it in the wall but now I have a blinking orange light. I have no idea what my next step is. I have an iMac and two MacBooks that all share the connection.
View 5 Replies View Related