I am having an issue with final cut x where videos aren't being imported into an event. I have tried using the import option and dragging and dropping the files. The files are mp4 which I've never had an issue with importing before. The program was working just fine a few minutes before this happened.
Info:
MacBook Pro, OS X Mavericks (10.9.5)
My mac mini is an i5 2.3ghz with 8 ghz RAM with a 240 GB SSD. I import and edit a lot of videos using imovies and final cut. a week or so ago final cut x started slowing down a lot and crashing and then imovie started wit hthe same simptons, i've tried reinstalling both, deleting the full .plist and preference files, i tried installing a fresh lion install and then installing just imovie and final cut and the same thing happens. does anyone have any idea of what the problem might be ? the fact that i used a fresh installation of lion and saw the same issues makes me believe it's a hardware issue but nothing else seems to slow down or have problems. Is it maybe the RAM?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3)
Yesterday one of my editors finished a project for a client. Today the client requested a change. When my editor opened FCPX 10.1.3 to make the change, my editor found the event he was working in yesterday to be completely empty. I stepped in to see what happened. Indeed he was correct, the event (Warm Springs) is completely empty! When clicking on the event , the "import media" button shows thus validating the idea that FCPX sees this event as empty.
When I went in to look at "show package contents," It shows that there is indeed stuff in that event. What my editor may have done to cause this problem in the first place but why there is stuff in finder level of the event file but nothing is showing up in FCPX?
Info:
Final Cut Pro X
I'm finding weird issues in Safari 5.1.7 under Snow Leopard the more I use it.On this Monday, I attempted to play the Apple WWDC 2012 video numerous times in Safari.The stream ticker loads as though the video is loading. Unfortunately, it never plays.What I see on the screen is a blue box with a white question mark inside where the video should play (image attached).
In addition, Safari will not play the other Apple Event videos prior to June 2012.I only see a white screen when attempting to play videos prior to June 2012. However, the WWDC 2012 and all other Apple Event videos play perfectly in Firefox 11.0.I've uninstalled, re-downloaded and reinstalled Safari with no success. I've also repaired permissions twice with no success. As well, I checked to be sure that no extensions were causing this
Info:Mac mini, Mac OS X (10.6.7), 2.4GHz Intel Core 2 Duo, 2GB RAM
I have a Library containing 22 Events which are numbered instead of named. Each event contains Green Screen clips whose thumbnails all look the same. I found the set of (Piece to Camera) clips I want, using a keyword search of the Library - but now I want to create a Compound Clip in the relevant Event so that I can do a rough edit (discard unsuitable and duplicated narrative etc).
Next, I want to copy the remaining good clips from this Compound to a new Project - in a different Library. I don't want to copy the unwanted clips.My problem is, finding the Event these clips originated from. I can use the disclosure triangle on each Event in turn, but surely there's a better way to find the parent Event of a clip in the browser?
Info:
Final Cut Pro X, OS X Yosemite (10.10.1)
The first thing I do after importing my media is I sync the secondary audio with the video clips.
The audio clips are usually named Zoom... or Tascam... and the video is typically named MVI... or something else.
Going back and forth between the correct take of the audio and the correct take of the video requires that I scroll up and down the list. It would be great if you could split the view into two separate lists and that way you could easily see both while syncing.
At my job I was given a new computer with an updated version of Final Cut Pro (FCP 10.1 - my old computer has FCP 10.0.7 installed). I tried moving my fcp events from my old computer to my new computer via an external drive.
The events did not show up in the fcp software on my new computer after plugging in my external drive.
I plugged my external drive back into my old computer. The events showed up but I could not locate any of the projects associated with those events.
Aren't projects stored inside events? How can I locate these projects so I can move them to my new computer?
I just updated to Final Cut 10.1.3
I was working on a project in final cut and my computer crashed. When I restarted my computer and Final Cut, it seemed ok. It opens on the project I was working on before the one I was working on when it crashed. When I go to scroll up in the event, towards where the most recent projects are, eventually I get the spinning rainbow of death and then final cut stops responding. I have forced quit and restarted it but the same thing keeps happening. When I open other earlier projects in the same event, they seem to open and work fine.
I tried 'Update Projects and Events' but when I click 'update all' it says that it can't find anything to update.
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
I am using FCP X 10.1, I know I can right click Clips in the timeline and reveal it in the " event browser ",
I am just wondering if there is a way to do it " the other way around " , I want to use any clip in my event browser and reveal it in the timeline ?
When I add media files into an event by dragging and dropping the file into the project the file does not get moved/copied 'Macintosh's HD Projects' folder.
Is there a setting somewhere I can change so dragging and dropping behaves the same way as when I use CMD+I to import a file?
I am using the most up-to-date version of FCPX in Mavericks.
When I click the FPCX library icon on my hard drive, it doesn't access to the different project and event folders. How do I access those folders as directly as possible ?
Info:
Final Cut Pro X, Mac OS X (10.7.5)
I have an event file that when selected crashes the app. I don't need it, but cannot select it to delete it.
I opened the package contents of the Library and found the offending file, and successfully moved it to my trash. However, it still appears in the event list when I restart FCP X (version 10.1.3). I have attempted to close the library and reopen it, close the app and reopen it, but still it persists.
Is there a way to force the library to rebuild itself, or something else that will remove it from the event list? (FYI it appears with a warning triangle).
Info:
MacBook Pro (15-inch Core 2 Duo), OS X Mavericks (10.9)
i am trying to delete this event file, but i cant move it to trash, no matter what.
View 2 Replies View RelatedI have a yellow triangle with an exclamation mark on my event. I was working on it and noticed it when I restarted FCP X. Could be that FCP X was crashing while copying or something. But now I don't get it away. But I looked into it.
The 4 photo's and 1 piece of music were quickly found in the menu left of the timeline. But there are two strange stings going on:
1. Scrubbing through the timeline, at certain points the Beach-ball begins to spin and won't stop. I waited 30 minutes (nothing), restart FCP X (nothing), rebooted (nothing), cleaned with Onyx (nothing): I had to force quit FCP X. I cannot see where it goes wrong, but it's at multiple points.
2. While using "relink files" all went wrong. It found photo's with te same name (but in fact other pictures). I deleted those. I went in the library (within Finder) to the Original Files folder, replaced the aliasses of the files pointing to a _Trash folder within the library. I thought the right pictures were back: no. I've dragged those back from iPhoto into the event, with the music also (from iTunes). There double now, but everything is good... except for the exclamation-mark!
Then I made a new library, dragged the project to the new library: copy used clips except the two options given (proxy en render files?). The new event also got a exclamation mark. I played the whole thing: no crashes, no beach-balls, no red missing clips signs, no yellow exclamation-mark in the Timeline Index.
In the original project I can now scrub little pieces (without spinning beach-balls) and I see the pictures on the timeline (in the preview) but with a yellow exclamation-mark in the index...? It cannot be found in the eventbrowser... how strange is that?
Since the update to Final Cut Pro X 10.1.3 I cannot go back to a previous library. What do I do. I'm afraid if I continue to edit things will go south later on.
Info:
MacBook Pro (15-inch Early 2011), OS X Mavericks (10.9)
I can import only selected portions of video clips from my iPhone5. At present I have to import the full length of the video clip into the event and in so doing, I am unable to 'weed' out unrequired segments. Is editing the video clip in the iPhone itself the only option one has or is there any other way of doing it during the import process itself?
Info:
iMac, OS X Mavericks (10.9), garage band, FCPX:10.0.9 version
After transferring my projects, and then events (separately) to my external hard drive, everything worked after relinking media except for all of my compound clips and multicam clips.
I do not know where to locate them in Finder, nor how to get them back. When I tried transferring my events and projects back to my internal hard drive, they still were not there.
Everything was fine before with Final Cut Pro X (Version 10.0.8) but now it is seriously hindering my work.
I accidentally moved an event from my library to the trash (from within FCPX using the 'move event to trash' command). I realized what I did right away and hit 'undo' from the file menu. When I open the event library I can see everything there, but the project is not showing up in FCPX, even after restarting the program.
Is there a way to save the project? I also saved all of the project files/folders, including the 'current version' to a separate folder before accidentally trashing (copied them to a backup with the master files I created). Is there a way to restore those files? I like to save the project folders/files with my masters in case I ever has to revisit any project for any reason. Figured I could just drop them back into the directory and then reimport all of the 'missing' media.
Recently my event clips and timeline clips have turned grey and no video imagery shows unless I pass the cursor over the individual clip. I was close to finishing this project and it plays in the viewer but making adjustments etc seems impossible. FCP is updated and I have restart the computer several times. I have used FCP for 3 years and have never had this problem.
Info:
Final Cut Pro X, OS X Mountain Lion (10.8.5)
I am new to imovie and i would like to stabilize some videos i captured with my digital camera. They are in .mpg form and it does not import.
View 5 Replies View RelatedMy macbook is reading my SD card and importing my pictures but not my videos. The videos are AVI. I tried reformatting my card but it still didn't work and some formats won't work with my camera. When I called Apple, I was told to download a codec, which hasn't helped. I downloaded DivX and when I open a video in DivX, it plays a blank, white, soundless screen.
Info:
MacBookPro
I have a new Mac Pro running Maverick bought when my IMac running Leopard died on me. The reason I never upgraded the old IMac was because of FCP 6 which I did not want to lose. I backed up regularly onto Time Machine and kept my FCP project files on an external hard drive
I was part way through editing a project when my IMac died. I bought 7toX thinking I would be able to import it but now find that I can't because you have to have FCP 6 or 7 already installed to do so, which you can't with OS 10.9.4.
Info:
iPhone 4S
I´m completely new to the world of plug ins etc and has shot for the first time with a Sony PMW EX1. I now need to convert the footage to import it to FCPX. (I normally shoot with a DSLR so no trouble with import)
I have downloaded the PDZK-LT2 - Camera Import Plug-In Version 1.0 for Final Cut Pro X from Sony and opened the zip filed, moved what I got (file, dmg, zip and pdf) to the Application Support File in the Library. If this isn´t what I´m supposed to do - what and where?
Should FCPX recognise it when I want to import the footage and choose the plug in instead of the normal importer, or do I need to run it through the new plug in first, then import the new files to FC?? I can´t find any beginners info on this and it´s a bit lonely here trying trial and error with a tired head. I assumed it would just show up when I try to import it.
How do I import moving background images from files (.mp4 and .mov) on an external hardrive into FCP X?
Info:
Final Cut Pro X, OS X Mavericks (10.9.4)
I'm running iPhoto '06 right now and I don't want it to import videos, since it never can tell that they're duplicates and thus I end up with many copies of the same thing (which is difficult to clean up, since I have to go into Finder to do it). So I have two questions:
1) Can you stop iPhoto '06 from importing videos entirely?
2) If I upgraded to iPhoto '09, would that fix the problem? As in, will it either be able to recognize duplicate videos, or allow me to stop video importing?
I got a Sony HDV HC9 today and I'm trying to upload some footage into Final Cut Pro. Now every so often it's coming up with "DV device cannot be initialized". I have no clue why this is. Is it something to do with the iLink being on or off? I have the import settings as 1080i50i so that shouldn't be a problem. I think i'm just doing something silly without knowing but it's driving me mad.
View 2 Replies View Relatedwe have a one hour audio file and we need to place text on the screen.
is there anyway to import a .word doc or text doc and have each paragraph appear as a separate text block in fcp?
we are trying to make a slideshow- sort of like keynote or powerpoint.
but we cant use those packages because we have lots of text....
anyway long story short, what are the options for importing paragraphs of text into fcp or motion?
Info:
Final Cut Pro X, Mac OS X (10.4.6)
After using FCP 7 for years, I have finally moved to FCP 10 and completed a course which didn't deal with this basic question. I have for example 3 SD cards, with video clips on them, lets call them, 1/ wide shot, 2/ close up and 3/sundry. I have created a library and have no problem importing data from SD_1, but I cannot work out how to eject SD_1 and insert SD_2 to import data and so on. Even after the MBP has imported, rendered and shows all background processes as "Idle" if I try to eject SD_1 it shows a message, "Card in use".
Info:
MacBook Pro, Mac OS X (10.6.8)
I am trying to import a library of my Mac Book Pro to My Imac (FCPX 10.1.3).
When I try to open it in my iMac, all the clips are ok in the browser but the project is not working, see image ....
I just purchased a new 15" MacBookPro, 2.8 GHz Intel Core i7 with 16GB memory and using OS X 10.9.4
I have a SanDisk Compact Flash disk with MXF files on it from my Canon XF 100.
I have had no problem importing the files onto my MacPro. using a Ultra Card reader with USB2
But now I am using a Transcen USB3 Card reader on my new MacBookPro and it does not recognize any of those same files to import.
I get the message, "No importable files selected."
The only difference I can see between the old MacPro and new MacBookPro is that when I select "Import Media" the CANON XF drive shows up as a DEVICE on the MacBookPro instead of a CAMERA like it does on the MacPro.
Importing a small motion movie into fcpx and I get this error "There is not enough disk space available at the selected destination. Please choose another one or clear some space" the destination is a new 6TB raid thats empty. I've created a new library on that drive and still get the same error!
View 1 Replies View Related