Is there such an application built in mac os x or a downloadable? I already have coconutbattery, but that does not give me the uptime numbers. I know there is one in istat, but it keeps going on if the computer goes to sleep.
View 1 RepliesAre there any apps which can be used to measure the actual time a charge lasts? I have tried x-charge but this doesn't seem to open in OSX.
View 5 Replies View Relatedi have a 13" mbp with 130 cycles an i use it extensively.its been about 6 months since i bought it and i noticed tht apple will cover my battery in warranty fr one year only if it has less than 300 cycles on it.
my problem is tht i typically use my laptop fr no longer than 4 hours at a time. which means i recharge the battery jus before the battery meter hits red an counts 1 cycle as complete.thts why i got less number of cycles on the battery
cn i continue doing this without any adverse effects to my battery and its life ??
What exactly is a battery cycle?
View 16 Replies View RelatedI just got my battery replaced and after a full charge both istat and mac osx shows that there is only one cycle available. I remember that my previous battery used to have at least 60 cycles. Is 1 cycle normal for new batteries or?
View 3 Replies View RelatedThe title says it all. I have a new battery in my 2007 MacBook, but my computer still says it's at 237 cycles. Is there a way to reset the cycle count? It does say, however, the battery is at 100% health.
View 3 Replies View RelatedI have searched countless threads about battery health but I feel that each individuals battery health situation is so unique due to the numerous fluctuations.
I have a 2010 13" MBP with battery health of 92%. Load cycle: 13. and Age of 4 months( but i got it 2 months ago)
Should I be concerned with the battery health at this point?
I noticed that my battery cycle (according to istat) switches over at 15%. So as son as it switches over to the next cycle I plug in the adapter to make the battery run a cycle from 100%-0.(I know the cycle in 100%) But it still switches over at 15%, that means that the battery ran only 85% of its capacity. How can that be? Is it possible to reset (delete) battery cycle data?
View 2 Replies View RelatedWell I've had my mbp(new model) for just a month now and the cycle count is up to 60 and battery health has gone down to 96%. Should I be worried or is it normal?
View 10 Replies View RelatedI bought a MacBook Pro 3 months ago, despite in the first charge I follow the instructions of the store. The problem is that my battery doesn´t complete the cycle of charge, if I disconnect my computer and the value of the battery decrease at 95% 96% 97% 98% or 99% and I plug again the charger to the MacBook Pro, the battery doesn´t charge at 100%. I followed all the instructions of synchronization but the battery remains the same.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.4)
I got rained on and my macbook got soaked. I dried out my macbook in an airtight container with some special salt for a few days, and luckily got rid of most of the water issues with my monitor. Unfortunately, my battery or logic board seems to have not been so lucky. My macbook is a one and a half year old 13" unibody, and now won't turn/stay powered on unless it's plugged in. For the first 15 minutes I've plugged in the magsafe charger, the battery is recognized. It says it's charging but stays at 0% (I then get the X over the battery icon). The weird thing is that my previously health battery now has a 0 mAh charge capacity and a 0 cycle count. Is there ANY possible solution to this, or has the damage already been done?
View 3 Replies View RelatedSo first off, I absolutely love my MBA. Now that we have that out of the way. Since day 1 I've noticed that the cycle count on the battery seems to be climbing MUCH faster than it should.
- I've had the machine 51 days. I was out of the country without it for 9 days so really, I've had it for 42 days.
- According to iStat and System Profiler my battery's cycle count is 37
- According to System Profiler my battery's health is "Good"
- According to iStat my battery's health is at 98% (It started around 96%, has been as low as 94% but seems to have settled in at 97 or 98% for some time now)
- According to system profiler my maximum charge is 5006 mAh. (It's also gone up a bit since the machine was new).
I thought the definition of a cycle was the equivalent of 100% depletion of the battery -- whether that's one long unplugged stint that sucks it dry or 10 really short ones. A cycle is the same as using ~5000 mAh of battery power. I've been really good about keeping it plugged in while I work (the outlet is conveniently located). I've run the battery most the way down maybe 5 times. I do, however, run it down 10 or 20% almost every day as the machine travels with me in sleep mode or spends the night unplugged in sleep mode at my girlfriend's place).
I haven't done any careful testing but it seems though that if I run the battery down just 20% or 30% or so and then charge it all the way back up the cycle count increases by 1. Considering I've only used it for 42 days, and the cycle count is already at 37, I'm worried that it will hit 200 cycles by the time it's 8 or 10 months old. Isn't the point where battery performance starts to wane? Anyone else out there notice a rapidly climbing cycle count?
I had some issues with battery drain while sleeping awhile ago but that problem has been solved. However, ever since that incident I could not be paranoid about the battery life etc.I heard people saying that leaving the charger plugged in is simply fine as long as I do the regular calibration once or twice a month or so. Yet, Apple stated that they do not recommend the laptops to be plugged in. I will be going to a college this Sept and I really do want my laptop to last at least the whole 4 years.
Ever since I have contacted Apple customer service about this Battery issue I have left my Macbook charged up and plugged in while using and letting it sleep. One thing I have noticed is that the battery indicator says 99% and doesn't increase or decrease yet the green light is on. Is that normal? Since this is my first Mac ever and also first Laptop I would like some advice on how to treat the Battery( I know how to do Calibration and such). Is it better to do full cycle usage of Alum Macbook battery than leaving it plugged in all the time? (I unplug it when the Macbook is off).
i have an older C2D MBP on its second battery. I don't normally use it on battery power so my cycle count is pretty low. I have attached images. It is telling me to service my battery. Should i be getting a new one? if so, how are the NuPower batteries @ OWC?
View 2 Replies View RelatedI have my Macbook late-2006 and suddenly the battery do not charge at cycle 103. I tried to talk to guys at Apple Store but the only thing they can do is to sell me a new battery. In fact, the battery was in recall before 2009 but I was not be able to send it back at that time. If the battery die only at cycle 103, is this normal?
Info:
MacBook, Mac OS X (10.7.4)
One of my most common navigation methods in Firefox is apple+# to a specified tab - you know, when you've got five tabs, hold down apple, and hit 1,2,3,4 or 5 to go to the associated tab. I need that functionality in Safari.
View 6 Replies View Relatedfor a couple of days now my little Mac Mini is crashing/freezing after some hours of uptime.. After a reboot I get this nice "Your computer was shutdown due to a problem"-report and it says Apple is informed, but honestly spoken when looking at the stacktrace there I have no clue why this is happening:
[code]...
Info:
Mac mini, Mac OS X (10.7.2)
I'm running a fully-loaded 2011 iMac (still the latest model as of this writing) and it stays up 24x7 (it's a work machine that is constantly compiling and testing software). I listen to music, mainly using Spotify, during the day. Parallels, VPN Tracker, Skype, and Chrome is always on as well.
After 20-30 days, the audio, across the board, starts to get choppy (music, Skype, even system sounds). After a day or so, it eventually gets to where the choppiness is so bad that audio is completely unusable. The only thing that I've found that fixes it is a reboot. Sigh... I've tried closing every application, plugging and unplugging the speakers, and chanting, and nothing but rebooting helps. As far as I can tell, there is no way to "restart" the audio system specifically.
Info:
iMac, Mac OS X (10.6.8)
I just installed an ATI 5770 in a 2008 8-core MacPro and was expecting at least some speed improvement over my existing 2600XT. I had read online that Aperture 3 used OpenCL, which is supposed to supported by the 5770. When I didn't see much improvement, I started up atMonitor to see if I can see any GPU% activity. Nothing. Flatline. Does anyone know if atMonitor supports showing GPU activity with this card?
View 3 Replies View RelatedIs there a way to measure actual CPU speed on OS X? I have tried MSI tools and that doesn't work (at least the version I installed doesn't work, if anyone has a download link that works I would be willing to try it) view my current CPU speed in GHz.
View 13 Replies View RelatedDoes anyone know of any application that will allow me to see details on how my bandwidth is being used? For example, I'd like to be able to track how much data I use when streaming Netflix (via a wired connection to my AirPort Extreme), browsing the web (wirelessly), or making a Skype call.
View 11 Replies View Related...............
For one thing, games perform terribly. And they used to work quite well! I played through all of Mirror's Edge on this machine and everything was silky smooth. Same with COD5 *and* 6, though I do realize those games were very well optimized and designed from the start to have high frame rates. I also played through Dead Space on this.. the performance wasn't as great as on the other titles mentioned but it was absolutely playable and fun. Now, when I run Amnesia: The Dark Descent or Starcraft II, the performance is absolutely terrible. In Starcraft II I get less than 10 FPS and in both games, I noticed a strange effect. The performance fluctuates. It will run smoothly for about 2 seconds, then the frame rate goes to slideshow-level for about 2 or 3 seconds, then back to smooth, back to bad, ad infinitum.
I did what anyone would try as a first step and killed all apps, especially windowed apps but also background apps that shouldn't really make a difference normally..................
Figured it would be a little lighter to have a thread that shows that Apple's computer CAN and DO work occasionally....Here's my uptime on my i7! It wants me to reboot for Safari update, but I refuse. As of 8:42am PST, March 16, 2010:I guess currently I have the longest uptime of anyone in this thread!
View 12 Replies View RelatedI just purchased my macbook pro 13inch (mid 2014) from a IT fair, 2 days ago and charged it ONCE to 100%. However, today when i checked my charge cycle, it reflects 3. Is this normal?
Info:
MacBook Pro with Retina display
When I select "SLEEP" from the Apple menu, press the power button my cinema monitor, the power button on the tower or the system is set up to sleep after a certain period of time - the tower immediately powers off, not even a complete shutdown cycle occurs. No new software has been installed (previous to issue). I have already completed the following:
-Unplugged all USB devices (other than apple mouse/keyboard)
-Reset PRAM
-Reset PMU
-Swapped out RAM chips (and mem tested them - no issues)
-Repaired permissions
-Cleared cache's
-Repair Disk from Start-Up CD
-Rebuilt directory from Techtool Pro
System Info:
10.5.8
Dual 1.25Ghz
2Gb RAM
I picked up an 802.11n Airport Express card for my Mac Pro last week. The installation went fine, but my Netgear router was only 802.11g. So I felt the need to get an Airport Express now that it?s been updated to ?n?. First I plugged the AE into my switch along with my networked printer, cable modem, and Tivo. My 1st gen MacBook showed me full bars and was very happy. My Mac Pro only showed 2 bars. They are side-by-side and about 20 feet from the AE. Strange. I plugged the AE into an extension cord and moved it closer to the Mac Pro. Still, after the AE completes its POST, I get full bars on the Mac Pro. As soon as I hop on the internet, it drops to 2 bars. It?s really weak and pages take forever to load. Sometimes not at all. The MacBook is still fine.
My wife being used to PC nightmares at work suggested that I reboot. ?Heresy?, I said. ?I shouldn?t have to do that. It should ?just work?.? From the Mac Pro, I turned Airport off and then on again. Full bars again. As soon as I hop on the internet, it drops. So what?s up? Much to my lament, I rebooted. Bingo! It works. Full bars, all the time. So I moved the AE back to where I initially had it. (About 5 feet away next to the cable modem and switch. One less extension cord to deal with.) The AE completed its POST, gave me a green LED and I went back to the Mac Pro. 2 bars again! ERRRR!.............
my name is David Francis and I publish a community magazine in Bowling Green KY. I consider myself fairly adept with computers and technology having been working with them since 1987. I was a full time web developer for 10 years prior to starting a magazine company in 2007. My experience (was) Microsoft (can I say that here?) and PC. I developed ASP websites using SQL databases and I was more or less a MS Partner having invested many years on the PC and the MS Software (lots of money too I should say.) I was "persuaded" to learn the Macintosh by a fellow publisher and friend who loaned me a computer and Adobe software for six months. I must say I reluctant, but realized quickly that I needed the tools and performance of the MAC.
I purchased a brand new MAC Pro in Nov 07 (2 x 2.66GHz Dual Core), this was the same month that Leopard came out and it was included with the new machine. It came with 2gb of ram which I upgrade (MAC certified ram) to 4bg about six months ago.)I immediately installed Adobe Creative Suite CS3 which I purchased as well as Office for MAC, Parallels so I could run Windows (sorry), and a logitech mouse and keyboard............................
I'm on the Mac indicated on my signature and am running Snow Leopard. The 4 finger swipes up and down are so buggy in this release. When I swipe up, I get the desktop to show, I swipe down to have the current thing come back up, but right as I let go of my 4 fingers, it jumps back to showing the desktop. I can't get out of this cycle unless I click on the lower right hand corner or something. Video of what happens
View 6 Replies View RelatedIs it possible to change the shortcut to cycle through windows in an open applications?
Right now the shortcut on my Danish MBP is CMD+< (the button right to the left shift button), but I would rather have it to be something like CMD+$ (button over the tap button).
Unusual long boot cycle on my MacBook Pro 13' Mac OS 10.6.8No new hard or software has been installed.
Info:
MacBook Pro, Mac OS X (10.6.8)
