Applications :: Compiled The Handbrake SVN - Unable To Actually Compile A Working Application?
Apr 1, 2009
It's been a few months since I've compiled the HandBrake SVN and I thought I'd give it a try after hearing some good things after the recent improvements. However, I've been unable to actually compile a working application. Like before, I followed the steps listed here. I know pretty much nothing about terminal, so maybe I'm doing something wrong in the process. I've tried using RapidSVN and Terminal to checkout the SVN, but neither seems to work. After navigating to the folder, I type "make" into terminal. Previously, it would take a few minutes to compile the application. However, now terminal just responds with "make: *** No targets specified and no makefile found. Stop."
View 7 Replies
ADVERTISEMENT
Feb 17, 2009
I just got a mac book pro and I transferred all my applications from my old g4 but handbrake doesn't work the same or doesn't at all. It takes very long to scan and it doesn't let me rip. I tried the same dvd on my old g4 and it worked just fine so it's not the dvd.
View 13 Replies
View Related
Apr 26, 2009
I want to convert a movie to .mp4 and, keep the chapters, audio tracks and subtitles. I have tried handbrake and it isn't working. Any other ideas?
View 1 Replies
View Related
Dec 4, 2009
I read a post the other day saying how people use MTR to rip onto the HDD and then use HB to do the encoding (thus saving usage on the optical drive).
However, I don't quite get the point. I'm trying to rip the last disc of Family Guy which has two eps and then a ton of pointless extras. With HandBrake I can see which two are the eps and rip them. With MTR I jave to do all 6.5GBs and then encode - it takes ages!
Can I not preview and set up a queue in MTR?
View 3 Replies
View Related
May 22, 2009
Using imac OSX. Had handbrake installed worked o.k till I downloaded latest version. Now it wont open. deleted from applications and secured empty trash. Downloaded it again still wont open. Icon appears in applications and nothing happens when you click on it.
View 1 Replies
View Related
Aug 20, 2010
There is a program called ATP which is short for "Alternative Transients Program" that I need to use for my work. The developers are extremely protective of this software even though it is free to use. You have to send a signed contract agreement to them through snail-mail before you can get a password to the site to download the program. This program is only available for Windows and Linux. There is no alternative for OSX. Can I somehow use the source for Linux to compile and run on OSX? Obviously Fink isn't going to work because of the licensing it can't be added as a package to the repositories. running it through Linux or Windows with an emulator?
View 6 Replies
View Related
Aug 24, 2010
how to compile a 10 minutes single video having photo slides with background score/music and videos, in mac. file formats, Input files, provided- photos and hd videos from Nikon camera & music Output file needed - 10 minutes video of avi / mpeg / mkv / mpeg 4 / hd video. Is thr any mac software which does this job?
View 1 Replies
View Related
Jul 28, 2010
I currently have jugglor compilation software which combines all text files and flash file to final .exe file formate. This final file however only run on window operating system.
Many customers now have mac and asking for mac compatible version. Is there anyway I can compile my all text and flash files to mac compatible executing file.
View 1 Replies
View Related
Sep 12, 2010
I have 10.5.8, have installed leopard to my computer, and now i keep getting the same message "Application Loader cannot be installed on this computer." I have an older power mac that doesn't have intel, but is there any way I could get a version of application loader that works for my computer?
View 2 Replies
View Related
Feb 17, 2010
way to run binaries compiled for linux to run on MacOS X. Sort like how the FreeBSD compatibility layer does it or lxrun. Okay, before you start telling me to use pkgsrc, macports, or fink let me tell you. This is not what I'm trying to do. And don't tell me to use a virtual machine. I kind of need full speed. I am asking if there is some way I can run Linux BINARIES. I know I can use a package manager or compile from source in fact I normally do. But recently I've been running into more and more closed source linux programs. Which I can't just make a few changes to the code and compile. I know I could use a decompiler, but those will give me assembler code, and truth be told, I don't know the language well enough and the amount of work
View 1 Replies
View Related
Jun 28, 2010
i'm trying to rip my dvd's onto my harddrive using handbrake but its not working. it says: "This version of HandBrake is 64 bit, VLC found but not 64 bit!" i cant find where to download the new vlc and its not working at all! i really want to start ripping and converting but i cant.
View 7 Replies
View Related
Feb 8, 2009
I am currently trying to set it up with my yahoo account and every time i enter the details it comes up could not connect to POP server or something along them lines
Do you know what this is?
View 1 Replies
View Related
Aug 31, 2010
I have a BluRay rip in an MPG format.. Whenever I load it into Handbrake, Handbrake crashes. Is there any other application I can use to convert it to MP4?
View 7 Replies
View Related
Nov 14, 2009
has anyone tested out handbrake on their i7? I'm still waiting on my i7 but was curious just how fast a 2 hour DVD would take on handbrake for a mp4 appleTV format...
View 2 Replies
View Related
Jun 13, 2009
I cant compile anything on the mac os x, here is the log:
sh-3.2# cd john-1.7.2
sh-3.2# cd src
sh-3.2# make
sh: make: command not found
sh-3.2#
My friend told me I have to download some kind of developers tools in order to be able to compile all the soft. does anybody have a direct link to apple.com ? I was looking for a couple of hours cant figue it out.
View 3 Replies
View Related
Jan 22, 2010
I recently pulled out my old Halo cd, and it looks great on my 13" MBP. I don't wanna lug around the CD all the time though, so I copied it as a .dmg to my harddrive. Every time I start Halo, I have to open Toast, mount the .dmg, close toast and then open Halo. Is there some way for these four actions to be compiled into a single button in for example the dock?
View 18 Replies
View Related
Mar 31, 2008
I'm dissapointed with the current Handbrake 0.9.2 version as it is about 3 times slower to encode at the same settings I used in 0.8.5b1. I was googling around for the download link, but all of them either point to the current 0.9.2 or give the 404 error.Foolish me to delete 0.8.5b1 dmg from my HD after I got 0.9.2...Or if somebody has the 0.8.5b1 version could he sent it to me? (PM)
View 15 Replies
View Related
Mar 28, 2009
I'm afraid I might have caused damage to my 4870 card while running handbrake for hours and hours.Could someone please check their GPU temp at idle, and then check it when running handbrake? The reason is because I want to see if handbrake puts any sort of load on the GPU at all. I can't do this because for some reason iStat Pro and Temperature Monitor cannot see the GPU temp nor GPU Fan Speed on the new MacPro's.
View 5 Replies
View Related
Oct 15, 2009
Does HandBrake work on SL?
View 3 Replies
View Related
Apr 27, 2010
I downloaded the latest and greatest Erlang virtual machine. R13B04. I went on to configure and compile it: Code: ./configure && make No luck! Code: ld: in /opt/local/lib/libxml2.2.dylib, file is not of required architecture. collect2: ld returned 1 exit status
make[3]: *** [../priv/i386-apple-darwin10.3.0/wxe_driver.so] Error 1
make[2]: *** [opt] Error 2
make[1]: *** [opt] Error 2
make: *** [libs] Error 2 It would seem that when I had libxml2 installed, it didn't build against i386? And yes, I have a 32-bit Mac OSX.
Oh well, just download libxml2, recompile for 32-bit OS and install... but I can't for some reason. Odd, isn't it? This should have worked without a hitch. This is what I did in the area where the source code and the configure script is: Code: % ./configure --build="i386-apple-darwin10.3.0" --host="i386-apple-darwin10.3.0" && make It built just fine. Now, if I look at one of the files: Code: % file testRelax.o testRelax.o: Mach-O 64-bit object x86_64 How else can I specify 32-bit compilation?
View 1 Replies
View Related
Jun 6, 2010
I a new to mac. I am trying to open a ".config" file but I get this error message: "There is no default application specified to open the document xxxx". Normally, on a Windows, I would just force open it with notepad as it conly contain text. How do I do the same with a Mac?
View 6 Replies
View Related
Jan 12, 2011
Bought a new Macbook Pro in December. 17''/ 2.53 Ghz i5 / 4GB ram.
Handbrake installed (Version 0.9.5 i386 (2011010300))
DVD drive is locked to R2 at the moment. Rips R2 discs no problem but Handbrake just locks up halfway through scanning any R1 disc.
View 1 Replies
View Related
Nov 25, 2007
I'm hoping someone here might have encountered this issue before and have some kind of a workaround or solution...I've attempted to rip Rocky Balboa (a DVD I own) using Handbrake. It detects all of the titles (for some reason there are 99!) and automatically selects the right one, which shows as 1 hour 42 minutes. Also, all the chapters are selected (1 through 28) However, when I try to rip it, the resulting file is only about 3 minutes long - it's just the very beginning
View 15 Replies
View Related
Feb 12, 2009
I'm using handbrake to rip my dvd library.
Quicktime preset.
It's been working fine, have no complaints.
However, recently I've been attempting to burn a dvd with some of the moviesthat I ripped using handbrake. This is where the problems began.
I tried burning a few episodes of a TV series to a DVD using iDvd program... it said that the dvd only had space for 3 300mb episodes. Somehow the project info window said that those three episodes where somewhere in the window of 4gb. And when I did try to burn the dvd, the encoding process took quite literally an eon. Solutions? Why is it that the iDvd program makes the files so huge? Why does the encoding take so long? I don't need anything fancy, I'm simply trying to get my .mp4 library into a form watchable from a dvd player.
I also had a similar problem with itunes, trying to import the movies to watch on my ipod video. It transferred into itunes just fine, but when I tried to load it onto the ipod, it said that it wasn't the right format. It then began to encode the movie, and I let it run all night, to come out the next morning and find it only 25% completed. Anyone know of a way to get large (2gb max) .mp4 files onto an ipod easily?
View 4 Replies
View Related
Oct 19, 2009
DVD files and save them right onto my Mac?
View 2 Replies
View Related
Nov 16, 2009
I'm getting an i7 quad-core soon and am planning on using HandBrake to copy across alot of my DVDs to store for viewing, I was wondering what the best settings are for this, I'll be backing up movies and alot of anime so I will need to have subtitles of course.
View 6 Replies
View Related
Dec 26, 2009
Does anybody know where I can get a 64 bit VLC so it works with my 64 bit handbreak? I've tried downloading vlc but it says it's not 64 bit.
View 2 Replies
View Related
Apr 8, 2010
Today i received a free G4 imac computer and would like to put handbrake on it for converting small clips and music videos. Do you know where i can get version 9.2 which is the last version to support 10.4?
View 3 Replies
View Related
Jul 8, 2010
While using Handbrake on a friend's Early 2009 MBP (version 0.9.4), and setting the frame rate to NTSC (29.97 fps), with a good amount of video filters on, the transcode was only coming in at around 8 fps.
This also happens on my quad-core windows PC, though it comes in now at around 21 fps (w/ all the same settings).
Is there a way to have handbrake encode at a certain framerate, but then take longer in order to do so, instead of the norm, where it just encodes and the frame rate's lower?
View 7 Replies
View Related
Jul 19, 2010
What kind of fps should I expect for video conversion on a 2010 macbook pro with an i7. I'm converting a 640x480 res video at 70% constant quality to .mp4 and I'm getting around 50-55 fps. Is that alright?
View 3 Replies
View Related
