So I know that bundled with the newer Microsoft Office 2007/2008 is a set of actions that get added into Automator. Among these is a "convert DOCX to DOC" action. Does anyone know - is it at all possible to get just this automator action without installing the whole of MC Office 2008?
View 1 RepliesI've been scouring Google for an Automator action that will allow me to drop .doc or .docx files into a directory and convert them to .odt, but so far I've had no luck. Can this easily be done or does it require a lot of programming knowledge to pull off? I really hope someone can help as this is a repetitive task that would save me a great deal of time.
View 3 Replies View RelatedI had been using automator quite successfully until recently now I'm unable to get automator to step through even the most basic setup. It refuses to step through to the second action and perpetually runs without producing any results as the image below shows.for any of my automator setups I get results for the first step and then an indefinate hang on the second leaving the step icon greyed out. I have tried this with numerous other actions like calendars etc but to no avail. Below are the very basic automator steps I'm using in this example.
Info:
iMac, Mac OS X (10.7.2)
whenever I try the "Speak Text" action to speak out some text I receive the Automator error message: "Another application is already speaking" and no words are spoken.At the same time I can run a "run shell script" action with a "say some words" which is executed as expected.Any idea what's blocking my Speak Text action?
Info:
Logic Studio, Mac OS X (10.7.3)
I tried to pass a text (containing a URL) to "Display Web Pages" action. It gets the text but adds %0D at the end of the text, so of course the "Not Found" error comes up in Safari. For example: [URL] Then after passing it to the "Display Web Pages" action, it becomes [URL] Is there a workaround for this?
Information:
Macbook
Mac OS X (10.5.6)
I created a folder action in Automator and can't find it to edit it or delete it. I've looked everywhere I could think of and ran a spotlight search but I can't find the .workflow document. All I want to do is delete the workflow.
Info:
MacBook Pro, Mac OS X (10.7.4)
I am using this action in a workflow. I have downloaded the Auxiliary Tools and put PackageMaker in /bin. When I run the workflow, it barfs on this action. The error message is "launch path not accessible."
Info:
Mac OS X (10.7), iMacs, MacBook, and iPhone 4
When docx files started floating around, I couldn't figure out how to open them in MS Word for Mac 2004. Then I found out you could download the xml converter from the MS site, and that solved the problem. However, now that I have installed Leopard and reinstalled MS Word 2004 and the requisite xml converter, for some reason, when I double click on a docx file, it does not automatically ask to convert it as it once did.
Instead, it seems to bypass/ignore the double clicked docx file and goes straight to that open document screen where you choose what type of document you want. Anyone know how to get it to automatically open the docx files up in ms word 2004 and convert with the xml converter in leopard?
I've recently made the move from a PC to a Mac, and so far, everything gone very smoothly. I got iWork with my Mac, and there is one problem that's bugging me; every time I open a word (docx) document in pages, it asks me if I want to keep the changes or discard them, and that is for when I am just reading them. When I edit them, and I go to save it, it keeps bringing up the save as box instead of overwriting the present docx file.
I've already installed any missing fonts I have in my documents. So, to summarize, my two main problems are: If I read a docx file, Pages acts like I made changes to it, despite the fact that I did not. If I edit a docx file, Pages keeps bringing up the save as dialog box when I try to save, instead of overwriting the original docx file. The same thing happens with Numbers and Keynote. I just need a temporary fix 'til I can get a hold of Office 2011.
does anyone know how to use the function key actions within photoshop? I really would like to think i'm simply missing something rather than apple did something silly like overriding applications choice for f keys.
View 2 Replies View RelatedI've been having a particularly peculiar problem lately with Photoshop CS3: Every time I try to use it, it immediately crashes. I'll open it, the splash screen will appear like normal, and everything appears to be OK. Then, when I go to do anything, (like opening an image, creating a new one�), Photoshop crashes. This is not a sporadic problem, nor is it a random one. It happens every time! I have not had my precious Photoshop for a couple of weeks (since about Mid-February).
I'm using a MacBook with Snow Leopard 10.6.2. I'm not sure if this is the culprit, but I've heard some buzz that Security Update 2010-001 (which I have installed) is causing problems with CS3. So far I've ruled out Dropbox, Displaperture, FinderPop, issues within my account, and disk permissions; and I've reinstalled Photoshop outright (granted, it didn't wipe out my pref's or licenses). The exact same problem has happened to several other people I know, and the only thing in common is that we a) use Photoshop CS3, b) use Snow Leopard, and c) keep our systems up-to-date. Furthermore, I do some Cocoa development, and every time my application starts, I get errors in the debugger console about loading Adobe's Applescript extensions.
Does anybody know when Microsoft plans on releasing a newer version of Microsoft Office for Mac? One of my co-workers currently own the 2008 version and he's really unhappy with it. He has an excel file that's around 4MB in filesize, containing some 11,000 rows and a bunch of columns too and it's really slow to work with (he has a 1 year old MacBook Pro) and some times excel also "runs out of memory" it says and the application just freezes. It should be updated properly etc, but I wonder if maybe a newer version more suited for Snow Leopard, might be released soon?
View 6 Replies View RelatedI looked at: http://www.osflash.org/ and could not find too many mac things. I'm not worried about complicated action script or whatever, in fact I have a free maker now, (http://www.soft32.com/download_203443.html) but it dose not have action script, that's why I need one that does, for lets see, less then adobe's outrageous $699!
View 6 Replies View RelatedI've many songs in wma format that need to be converted before i can listen from itune. I did a search in this forum and found this recommendation.[URL]I called up Apple this morning and they recommended me a 3rd party which is Kigo Converter. I did a Goole search and turns out quite a few. Here is just one:[URL]I did further search and in fact there are plenty 3rd software for conversion.I'm quite confused. Can someone advise which is a proven one?
View 6 Replies View RelatedYou see, while working in iMovie I accidentally exported a movie when I wasn't finished with it, and I wasn't able to cancel the action. And now, since I'm not done with the project yet, I was wondering - can I, and if so, how, can I import it back into iMovie? I am operating in iMovie '09 I am not new to Macs - just the '09 applications.
View 1 Replies View RelatedWhat is the best Mac ap for converting .mov files to .flv files? I need to convert to .flv files to upload video to my website.
View 4 Replies View RelatedI am looking for a free app that will convert 3GPP video file to a mp4. I have found several demo's but they leave a watermark.
View 2 Replies View RelatedI know this has probably been explained in many different ways already but i would like a nice explanation.
So i want to play HD movies from my hard drive and through my Xbox but .mkv files are a no go. I would like a free application to convert to .m4v
I have a Macbook and a library mostly in M4A format. I have a 8GB mircoSDHC card for my Virgin Mobile LG Rumor Touch. iTunes 9.0.3.I am trying to convert M4A to MP3 so it will work properly on my phone. When I convert from M4A to MP3 using iTunes, the music losses the artist & album info so it appears with only the track name on my phone. MP3s that have never been converted from M4A (from Amazon for example) play and appear with all info on my phone. How is iTunes stripping info during the conversion? I only have 1 or 2 songs bought from iTunes store, so they are not protected.
View 1 Replies View RelatedI'm a Mac switcher from late 2008. I've also added an iPod Touch and Apple TV to our growing stable of Apple devices.
While I've managed to install the necessary applications/hacks to my MB and AppleTV to play AVI's directly without conversion, the iPod Touch is another matter. It of course requires mp4 or h.264 format. I have been using iSquint to do the conversion and then move the mp4's into iTunes which synch fine after that.
However I am looking for a solution where I could drop the AVI files into a folder and the conversion program would automatically watch that folder and run the AVI->MP4 conversion automatically. I can't seem to find a solution to this through my Google searches and forum searches here. Perhaps it's a simple Applescript (or whatever it's called) which I haven't used to date?
I am trying to send a wide format poster file to Staples and the error keeps reading that the quality is too low. I have tried formatting it to .jpeg, .tiff, .png, .bmp, but nothing works. I have determined that it must be the original export to .pdf that is the trouble. I have tried to create a .pdf file through the print option on iPages as well as through the Export option to formulate a .pdf file. The end result seems to be the same. Does anyone know how I can increase the quality of the .pdf file.
If there is a program out there that I can download to create a higher resolution conversion? Is there someway I can make the conversion to one of the files listed above higher? or am I right in thinking that the problem lies with the original .pdf conversion? I need to get a banner poster done by next weekend so I was hoping to get this issue resolved over this weekend. Most of the information on the file is just pure text and gradient fills. I even tried removing the three head shots to see if the photos were the problem...but nope.
I'm an old-school Visual Hub user when it comes to converting video formats. Unfortunately, that app is no longer being made and it doesn't solve my current problem so looking for some advice. My nephew won an MP3/video player as part of a contest at school. Its not an iDevice but its a prize and he's enamored with it. The problem is, although it supports video, it only seems to support files formatted in the "MTV" format which I understand to be really limited technology.
Can anyone recommend a decent media conversion program that will let me convert MP4's, AVI's and such to the MTV format? Its likely time I upgrade from Visual Hub anyways so I don't mind spending some money on a useful app. The problem is most of those I see mentioned in the forums here don't specifically mention the MTV format.
I shot some videos on my phone and would like to convert them to another format for the computer. Does anyone know a program for mac to do that? I know there are LOTS on windows but I am too lazy to reboot out of the awesome Mac OS X.
View 5 Replies View RelatedI have an ALAC music library that I would like to convert to iTunes Plus. The "Advanced" tab does not offer that option. The iPod/iPhone option is grayed out and will not allow selection. The only option available is Apple Lossless.
View 1 Replies View RelatedJust wondering id anyone knows how to create a single itunes entry for multiple conversions of the same film. When you buy a movie from itunes store you get the ipod and appletv versions.
I've got a couple of family dvd's I want to convert to appletv and iphone - but i don't want multiple line items in my itunes..
I still have a great number of AIFF files in my music library.
I'd like to convert them to Apple Lossless, as it's the same sound quality at half the space.
I know you can create a copy of any file in another format, but it sounds quite complicated. First you have to create a copy, and then you need to delete the "original" AIFF file.
Can't I just convert an existing file without a copy, keeping also the play counts?
know how to automate the conversion of an mkv file after it completes finishing?
Basically, I want to start a (totally legal) mkv torrent in the morning using Transmission, and when it finishes whilst I'm out - have it automatically start converting via VisualHub, so that it's done when I get home in the evening.
Is this possible in any way? I've had a look on Automator, but I'm not really familiar with that.
I have a bunch of mkv video files with ass subtitles, and I've tried Handbrake, which is fine and dandy except it doesn't support .ass subtitles or the Xvid format. Anyone know a good video conversion software that supports encoding to Xvid/Divx, .ass subtitle, and mp3 audio?
View 2 Replies View RelatedI've got the flip4Mac that allows WMV files to play in Quicktime, but it doesn't work too well, so I was wondering if there's something free that I can use to convert a WMV file to AVI, or MPEG, or anything that works normally with Quicktime.
View 5 Replies View RelatedDoes anyone have a good suggestion for converting MPG files (Windows) to a file the MAC can read?
View 1 Replies View Related