I need to replace the hard drive to my iMac 1.8 GHz, PPC G5. Would an external drive be too slow to run the OS? If I do replace the internal drive with another internal model, proper dimensions/specs for this model iMac? I've been given various, conflicting information. Do I need to use a 1.5 GB/S drive or can I get a faster drive? It is hard to find a 1.5 GB/S drive.
Info:
iMac, Mac OS X (10.5.8)
My hard drive was going out on my older G4 Imac so I took it out and replaced with a new drive. Prior to removing the older defective drive I backed everything up on an external drive.
*I assumed I could just format the new drive and then reinstall the original OSX disks and then drag over the backup files and live happily ever after!
Problem #1: mac starts up but flashes a question mark. I insert the backup/restore disks that came with the computer (6 gray discs). This is not correct I see.
Problem #2: I am not 100% the drive I have is the right one (see below for all details). I may need a different connector? I ran the diagnostic cd that came with it and the new hard drive shows up and it says it's OK. NO other problems on the test.
Problem #3: I think the drive will/can only access 128GB of the new 200GB hard drive? if so, does this mean it will not work without an card or it will just not see/read the other storage?
Problem #4: Are the restore disks NOT the OS to reinstall? or was this on the internal hard drive already from the factory pre-loaded?
Someone said I would have to have someone make me a bootable OSX install and connect via external drive to start and then format the new drive and then re-install the OS somehow. I have been racking my brain trying all options and researching online all weekend!!
*Please let me know what the options are to fix this situation.
details:
G4 iMac
Power PC M8535LL/A
800 Mhz.
512 MB.SD Ram
OSX 10.4.11
Original Drive:
MAXTOR
4D060H3 60GB
5400 2mb.
3.5" ULTRA ATA-100 EIDE
New drive:
MAXTOR
200GB
3.5" ATA/100 EIDE
7200 RPM 8Mb.
*includes Ultra ATA interface cable
(ASSY, ATA133,ROHS cable)
Other:
Pre-Installed MacOS: 9.2.2 & X 10.1.2 Maximum Mac OS: X 10.4.11
Details:This system cannot run versions of MacOS X more recent than 10.4.11. Mac OS 9 Support: Boot/Classic Mode
Details:This model is capable of booting in MacOS 9 and using MacOS 9 applications within the Mac OS X "Classic" environment.
Are there any step by step instructions out there on how to replace an HD in an imac g3 that has pictures for every step?
View 3 Replies View RelatedI have a mid-2009 MacBook Pro 17" computer. I bought a 750gb Hitachi drive in an upgrade kit from OWC. I have formatted it and now using Carbon Copy Cloner am making a copy of the internal 500gb drive. I am not very familiar with Mac OS X drive partitions. When Carbon Copy Cloner copies the 500gb partition from my Pro, will it leave the other 250gb or will I need to use Disk Utility or somethng else to format the remaining space? I would like to put the 750gb in the Pro moving the current 500gb into the external housing if possible.
Info:
Mac OS X (10.6.8)
I did a search but couldn't find any specific info as related to the 20" (late 2006) iMac. Basically, I do a lot of audio work with Logic and DP and I'm interested in replacing my 20" iMac's optical drive with a second internal hard drive. If anyone has any experience or insight regarding this, I would greatly appreciate your input. About 6 months ago, I did a DIY replacement of my iMac's internal hard drive (upgrade to 1 tb), so I'm pretty sure I'd like to DIY an optical drive / hard drive swap - that is, if it's 1) Proven to work stably (thermally and otherwise) 2) Not going to require the iMac's fan to be running faster/louder than normal Looking at my iMac's system profiler, the DVD drive is on an ATA bus (which, as I remember it, is slower than S-ATA). What kind of transfer rates do you think one could realistically expect with a hard drive on this ATA bus? Also, would I have to be careful about new hard drive compatibility, or are S-ATA and S-ATA II backwards compatible with ATA?
View 1 Replies View RelatedHow do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one? I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.
Info:
iPod shuffle, Mac OS X (10.7.3)
I replaced the 250G drive in my imac with a 1T (SATA) drive 2 years ago, but now the 1T drive is close to capacity. I was wondering if anyone had any internal hard drive recommendations for a 2T drive. I have been having some strange problems lately with my imac locking up with only the mouse responding that may or may not be hard drive related. I was using a Seagate drive but I would like to go with someone else.
View 1 Replies View RelatedA few days ago I replaced my internal hard drive because after 2 months from purchase it crashed. The service people replaced it with a ST3500630AS Q Media and all I can say is that it's noisy. It's really irritating because I used my mac to be completely quiet. Should I be worried and call the service to tell them what's going on or should I let it be?
View 4 Replies View RelatedI just got a new WD external drive to put some media files on. I went into disk utility just to make sure the external was working fine before I started moving things over and it told me my internal hard drive in my 08 iMac is failing! Good thing I bought the external when I did,
View 6 Replies View RelatedMy Imac cannot find its hard drive. When I turn it on it shows a folder with a blinking question mark. And even when I go to reinstall the software it can't find a destination. What can I do?
View 2 Replies View RelatedMy brother's MacBook's hard drive just died. He has a backup of all of his data. If I were to buy this, what do I do after installing the hard drive? We have the Leopard disks and everything.
View 5 Replies View RelatedI am wanting to replace the hard drive in my macbook but I don't have the os disks that came with the computer (I've recently moved and they're beyond lost). I've read where apple can send me replacements (I assume I'd have to pay for them). Can I get the leopard upgrade and use that, or it just that, an upgrade and I need osx already on the computer. I don't care about backing up anything, as theres nothing on it of any importance, all my music and photos are on an external hard drive.
View 3 Replies View RelatedI just need help trying to take out this darn hard drive. It won't come out. There are two hard drives in my G5 right now, I'm trying to pull both of them out. I tried to do the bottom one first, didn't work. Tried the top one, didn't work. I'm stumped, and I tried my hardest to take them out. I followed these instructions:
http://www.info.apple.com/usen/cip/pdf/g5/073-0851.pdf
I am going to be replacing the hard drive on a macbook pro that went crackle and fgave me the spinnign wheel of death before it totally went dead on me but i dont have the discs to reinstall the OS (and to be honest I forget what version it is) on this laptop but have the discs for my imac. Can I use these discs or do I need something else? I got this from a former roommate who upgraded to a newer macbook and was going to toss this so there are no discs for this macbook. Totally at a loss here....not sure if the data is recoverable from the hard drive so need to know what my options are before I take it in for repair tomorrow....
Info:
iMac, Mac OS X (10.6.8)
I just replaced the hard drive in my macbook pro 2011 with an agility 4 ssd. I was able to copy all of the information over to the new drive. However ever time I wake the system up from sleep it freezes. I get the pinwheel. I am forced to restart the computer to get it working.
Info:
Mac Pro, Mac OS X (10.7.4)
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies View RelatedI do a lot of traveling and have a lot of video files that I like to take on the road with me. I saw a 500gb Western Digital 2.5 hard drive on Amazon.com and want to replace my 160gb hard drive with it. I have an external hard drive with time machine. Is there anyway to do this so that I do no have to re-install everything?
View 6 Replies View RelatedThe hard drive in my MacBook is turning 3 years old, and weird noises are being emitted from it, which means, the hard drive is on it's last legs. The stock Apple hard drive was an 80GB. Specs of the MacBook are in the sig. I was thinking to myself, why not take this as an opportunity to get a much larger hard drive for not that much money. So I came across this:
http://www.bestbuy.com/site/olspage....=1218030894682
Question is, would it fit the MacBook White from 2007, and how does it perform?
I'm thinking of getting a refurb MBP but they come with a 5400rpm hard drive and I want a 7200rpm. Does anyone about how easy it is to replace the internal hard drive in a MBP and how much it would cost?
View 5 Replies View RelatedI have a problem which I couldn't solve for quite a while now. I bought a new WD Scorpio Blue 500 GB for my uMBP 13. I can't, however, figure out which screwdriver I need for those mounting screws that have to be removed in order to change the drives. I first bought a Torx 6 (Black & Decker TX 6) which is too big. I then ordered both a Torx 4 and Torx 5 from eBay. They are both too small... So what is wrong here? anyone had the same problem? Or any alternative solutions w/o using a Torx driver?
View 4 Replies View RelatedI recently thought it would be a smart idea to volunteer to replace the failing HDD on my friend's Macbook (white, late '07 model), since she could get a higher capacity than 120GB this way, as opposed to getting a replacement at the Genius Bar. I went on ifixit.com, since I was able to change a couple of components on my 1st generation Macbook Pro without much trouble, and followed the guide step by step. Now, I am no rookie with this stuff. I even used to work at an Apple store, but as a specialist, not a genius. However, when I did everything (and it would seem that the installation itself was done properly), the computer screen would remain off once I booted the computer.
I tried changing it back to its original drive to see if I could at least get it to boot, but the same thing happened. Nothing on the display. I tried starting up while pressing C to run from the Snow Leopard disc, I tried starting up while pressing Option, I tried everything I can think of. I am running out of options and I have no clue what to do. Is there something I should have done before putting in the drive? Does anyone know what could be done, aside from taking it to the store and paying the $200 for an HDD replacement? (my former co-workers at the GB seem to be MIA for this).
So I've come to the realization that I need a bigger HD in my MB. I'm a little confused on how to go about doing it though. If I use Super duper and put a backup of my existing HD onto an external HD. How do I restore it after the new HD and clean install of SL is done? Do I just download the super duper app again and use it to restore from the external HD?
View 9 Replies View Relatedhttp://www.newegg.com/Product/Produc...82E16822136459
I want to buy this hard drive and pop it into my MacBook (current revision)
1. Will replacing the hard drive myself void the warranty?
2. Will this hard drive fit properly in my computer?
I have an IMac 20 inch 2007 model. I have filled my hard drive up. I would like to clone and replace the hard drive?
Info:
iMac, Mac OS X (10.6.8)
What is the easiest way to replace the internal hard drive on a 2009 iMac? I've got 320 gb of space and only a few gb left.I'd like to upgrade to 500 gb or more.I don't want to take the computer apart myself, I don't think.
Info:
iMac, Mac OS X (10.7.2)
I have removed the 2.5" Hard Drive from my better half's 2006 Macbook and looking at the Seagate I got to replace it the power pins don't appear to line up. Â
I can't see deep into where it seats. Do you have to replace the HDD with specific makes of 2.5" HDD?
I just recently got a Power Mac G5 (June 2004 model) from a family member, but I want to replace the hard drive with a new one. I understand I can use just about any SATA drive I'm looking to replace the old one with about 1TB of space, but how to I initialize it once I physically install it, and will I lose the basic programs, such as safari, iLife, iPhoto, etc? I know I'll lose the loaded data such as pics and music. I'm still a bit of a novice when it comes to the macs.
View 6 Replies View RelatedI was going to get a 500GB hard drive to replace my 160GB hard drive in my white macbook. I was wondering where's the best place to backup the data online before changing it out? Carbonite?
View 3 Replies View Relatedhi there, I have iLife '06 that came on my macbook when i bought it mid 2007, but now, as you might have read in another post, I dropped my macbook and i might need to replace the hard drive. So if that is the option I have to take, how do I get iLife back once I have reinstalled the OS? Surely I don't have to purchase it?
View 9 Replies View RelatedI swapped my hard disk on the above mentioned machine and it won't boot. When I turn the machine on it tells me that there is no bootable disk. I have previously booted from the disk via usb, so i know there is a bootable partition on it. I swapped back the original drive and it boots up fine. Why wont the external drive boot when run internally?
View 6 Replies View Related