I'm running vista on my alu 08 macbook as well and everything is working great. With the default bootcamp realtek drivers I believe their version 1.14 speaker volume is very loud.Unfortunately I made a "mistake" or downloading the latest realtek drivers from their website and while everything works, speaker volume is at half it's loudness. Earphone output seems unaffected.
View 2 RepliesI have Vista (yeah, yeah, it sucks. Really. Just testing the Ati card) on my brand new iMac 24 and the audio quality is VERY low. Worst than the macbook speakers. The strange thing is that in MacOSX the quality is good and even in Vista with earphones. I reinstalled the Realtek HD drivers but it didn't change anything.
View 5 Replies View Related1. Does Anyone Notice That The Realtek Windows Drivers Sound Quieter Then The Way The Mac Sounds Using hd280 pro headphones here
2. Does anyone and am ready to pull my hair out here notice if there western digital goes to sleep when ever it god dam pleases under windows 7 jeez i can be half way through copying a file and poof drive goes in to sleep mode
is there a way to make the MBA louder?
View 6 Replies View Relatedslider is set to max, yet there is just a whisper of sound. Headphones work fine. harman/kardon mini towers.
Info:
Mac Pro, Mac OS X (10.6.8)
I know the issue of the MacBook speaker volume have been discussed elsewhere, but I was wondering if there are any system hacks/applications that can increase the maximum volume?
I don't really use the internal speakers for anything other than system sounds and listening to web-content -- flash videos, youtube, etc. (In other words, if I want to listen to iTunes or a DVD, I'll use headphones or eternal speakers).
The max volume is just *barely* loud enough unless there is absolutely no ambient sound in the room...
I just got the new 15" Macbook Pro a few days ago. My first Mac
Anyway, when I plugged my external speakers into the headphone jack of the MBP, the volume control (both in the Apple bar thing on the top of the screen and the F10/F11 buttons) switched so it would control the external speakers, as it should. The problem started when I unplugged the speakers and went to use the internal speakers again.
And the volume control doesn't work. If I push F11 for volume up, the little screen appears and it looks like the volume is going up, complete with the little water drop sounds, but it doesn't actually adjust the volume. If I plug the speakers back in, it will control the speakers properly, but I can't figure out how to make it control the internal speakers again
I'm sure that if I restarted it would fix itself (probably), but that's a real pain as I am frequently plugging in and unplugging speakers to my laptop.
I have an external bluetooth speaker from jawbone called jambox. From the start on I had the normal speaker volume like I also stil have it if I connected the bluetooth speaker with my iPod touch. But some day ago, the volume from my whole Mac (not just from iTunes) dropped through my Jawbone. It is not just about 40% of that, what I know of, that the Jawbone Jambox is able to bring. This problem exists through all audio / video programs on my Macbook Pro. So like in iTunes, also in VLC or MplayerX. Everywhere. The software sound of MacOS Lion is on maximum. Also the sound control of the jambox itself is reached. It seems like there is a protection against to high volume anywhere turned on which just do not allow me to turn up the volume beyond a specifc point of db. But, I can only repeat: The speaker is in a good shape. I am able to play music much more louder with my iPod paired. But just not with my macbook. I am looking for a "hidden" option to disable the maximum volume limitation of my Mac to the speaker.
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4), Jawbone Jambox
On my new 15inch mbp the volume keys have suddenly stopped working. I checked in system preferences that the use F1 keys as standard is not selected. When I plugged in speakers or headphones the volume keys work as normal. But with just internal the little picture on screen comes up so the keys work but it doesn't affect the volume?
View 5 Replies View RelatedI have a small issue on my iBook (G4) that's been driving me a bit crazy lately. I noticed a few months ago that when I selected a song/video on iTunes to play, I would get uneven volume output on my two internal speakers. I tried restarting iTunes, restarting the computer, etc. to no avail. In addition, sometimes this problem would not arise for a few days, and then suddenly start up again.
I then dug up the program Audio MIDI Setup and saw that the sliders were uneven . Once I slid them back together, I thought I had solved my problem. Nope! It came back, and I even saw that if I opened up Audio MIDI Setup right after the computer turned on, the sliders would be skewed even before opening iTunes or Safari or some other program that used audio.
I've come accustomed to manually balancing the volume output, but the irregularity of this problem occurring frustrates me. Attached is a screenshot of Audio MIDI Setup with the issue--note the Audio Output sliders.
Set the computer to output to speakers, keyboard vol controls etc control the speaker sounds and "pop" out of the speakers.
Sleep the system and it reverts back to the internal speaker, even tho the output from iTunes, Quicktime or whatever comes out of the speakers.
Does this happen to anybody else?
I have a pretty strange issue about sound in my macbook pro 13". I have NO sound at all. when i try to decrease, or increase the volume, the little window with the speaker shows a little forbid signe there. In the sound preferences its says, no output device. What can i do? I tried to install osx86 to my girlfriends laptop, and i downloaded multibeast. Accidently i installed it, to my macbook, and it messed up my whole system. When i rebooted it, it couldn't boot, and i had to restore my system. Everything looks like good to me, i even got back my personal files too, but the sound is not working. Multibeast installed VoodooHD kext, but i removed it already.
Info:
MacBook
Pro, Mac OS X (10.7.4)
I recently installed the 64 bit Windows 7 Ultimate operating system onto my MacBook Pro 13 inch. I have the most basic Macbook Pro 13 inch with nothing fancy added. Whenever I load up the Windows 7 OS on my Macbook, it never utilizes or even realizes that I have the NVIDIA graphics card in my laptop. It instead believes I have some integrated graphics card that cannot even run the most basic of PC games. I know my laptop can run these games because on OSX it runs multiple games with higher requirements than these games I am trying to run on Windows.
Basic question: How do I get bootcamp or whatever else to make Windows 7 realize I have a NVIDIA card and drivers. Sorry if I am coming off as stupid or confusing.
So i am trying to change my apple boot camp drivers to nvidia's, but i think i must have downloaded the wrong ones, or done something wrong. I tried to install Geforce/Ion driver release 192.62, (from nvidia's site, i selected gefore 8 series) and when i ran the setup it said: 'nvidia setup program could not locate any drivers that are compatible with your hardware' . My questions are:
� Which drivers should i download? a link would be great.
� Are there any pre-requisites i must do, such as install version 170 first?
I am using an iMac 24" with 4gb ram, 500gb 5400 rpm HDD, and 8800 GS 512mb.
The reason I am trying this, is because when i play some online games, i often get bad lag spikes, but that chat is still running. Someone recommended me to 'update my drivers'.
I have a Macbook plastic, 2.4 GHz intel core 2 Duo with 2 GB of ram.My Mac is currently running on OS X, i used to have a 40 gig partition Windows XP, a couple of friends of mine where talking about how much they liked Windows 7 and finally i had had enough blue screens to say, sure ill switch, why not?... assuming it would not take longer then lets say a day at most, i set off on my quest.
FWI, im running an older model Macbook that was bought refurbished (not sure if that has anything to do with my problem). anyway i removed my previous partition, then using Boot Camp Assistant i repartitioned a 40 gig section for Windows 7. Then ran the installer. I have a copy of Windows 7 ultimate 86x. The Windows boot screen turned up, i had to reformat the partition so that i could install, no problems there. after all said and done the installation worked perfectly, up to a point... First problem that appeared was the lack of sound. i fixed that by downloading Realtek's High Def sound drivers.
Then it was the rest of the drivers for the macbook. heres where i run into my problem, i have the Mac OSX install discs 1 and 2. inserting the first disc the option of the auto run of the setup popped up i clicked run. and instead of the same old install drivers option all i have is the option to install the software that lets macbook airs share cd/dvd drives... needless to say i got frustrated and to put it lightly pissed off...
unsure of wtf was going on i looked it up online and really couldnt find anyone with the same problem, i found a web page saying that i should have the windows auto update itself and that should fix the problem. it did not. i dont know what the hell is going on. and im about this close to reinstalling windows xp and telling windows 7 to go **** itself...
I can't find the answers I know its been asked before.
Its the 2010 MBP 13"
I have Windows 7 Professional 64bit running through parallels 5 and it seems to be missing alot of drivers (wireless most importantly, but also audio etc). Where can I get these, is it the same as bootcamp drivers( are they on one of the disks that come with macs?).
I've installed a legit copy of Windows XP, SP2. Nothing works, not my webcam, not my internet, not even the full resolution. The first time around that I did this, I had the DVD that came with my iMac, I installed the Windows drivers stuff off of it, and everything worked perfectly.
Can anyone point me in the direction of either a replacement for that DVD (.iso image or something?) or simply the required drivers that will let my iMac 8,1 connect to the web?
Before I get flamed and etc... I have google and done some research about this issue but cannot find much about it.
I am not sure if this is a very common issue or topic but how do you adjust or modify your apple keyboard so that you can adjust screen brightness or volume? I am currently running Windows XP SP3, on a 2.4Ghz Unibody Macbook.
I boot camped my Macbook Unibody 13" (bought early 2009) with windows 7. However the bootcamp version was 2.0. I now cannot get drivers from the 3.0 bootcamp update.
View 2 Replies View Relatedmy on board audio is realtek 883, which HDD.kext shall i install, where to get it?
The APPLEHDD.kext and Voodoo.kext got sound but sometimes I can here noise from the speaker.
I have a damaged HFS+ volume on a storage appliance (Drobo). It does not mount in the Finder but it is visible with Disk Utility and Data Rescue II, and I've copied quite a bit of data off of it using Data Rescue II. However, because of a separate issue everything on the Drobo is currently read-only.
I would like to copy the damaged volume (about 1.1 TB) as-is to a fresh 2 TB hard drive so that I can then attempt to repair the volume using Disk Utility or other utilities. There is no other way for me to overcome the read-only status of the Drobo. I'm looking for the best way to do a sector-by-sector, block-by-block, or byte-by-byte copy of the damaged volume... whichever of those might be the correct term for what I'm describing.
The tower speaker just doesn't cut it and I want to hook up my 5.1 Locitech speaker system. I couldn't find any Mac sound cards on newegg and am having trouble finding results anywhere else. What card is recommended by most Mac Pro users? My professions isn't in audio so it doesn't have to be perfect, just something to play games, music, and movies.
View 5 Replies View RelatedI have a 2.1 Logitech Z4 setup, and the sound is only coming out of the left speaker. I have checked the wires, they are fine, and both speakers do work - but it could be the socket that's the problem. It's plugged into the line-in socket, I have put the output in System Preferences to Headphones, and everything is inserted correctly.
What do I do?
EDIT: My sound system is plugged into the headphones jack. I have tried putting headphones into the headphone jack and the sound also only comes out of the left earbud.
I just installed vista home premium on my imac using bootcamp, so far everything is okay except my speakers. They seem really tinny and very weird, the audio software that boot camp installed is something called Realtek HD, does this have something to do with it? My speakers are fine on mac osx, why not on the windows partition? it's seriously unbearable, anyone else come across this? I can't seem to change or tweak anything from any of the preferences in the sound options or anything either. I'm using the built it speakers on the latest 24 inch imac.
View 16 Replies View RelatedSince updating the Windows 7 drivers with the Snow Leopard BootCamp version 3 I've noticed strange sound distortions coming from the left speaker of my iMac. This seems to be a driver issue because both under OSX as well with older drivers which came with Windows 7 RC1 the left speaker functions properly.
View 2 Replies View RelatedOk, Here is the scoop. I am trying to get Wifi to work on my macbook while on XP. When I put in the disk and it says "The package requires a newer version of Windows Installer. Would you like to update?" I say yes and it says "The requires resoruce update is missing." and if I click no it says "The operation is aborted." or something.
View 10 Replies View RelatedMine sounds muffled on the left when compared to the right speaker.
Its very noticeable when you play around in your balance settings (max left or max right) that the volumes are different.
1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple
2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
I just noticed that the sound of my 21.5" iMac speakers kinda changes notably when I'm using Windows (BootCamp). Compared to the sound while using Snow Leopard, it sound very thin, bass-less and... just strange. More like MacBook speakers, or just small speakers. Another thing is that the headphone input doesn't work on Windows. Could these issues be related to audio drivers? I don't know much about that sort of stuff.
View 3 Replies View RelatedI have just installed Windows 7 via bootcamp and everything went smoothly, the only problem is that i have lost my DVD of snow leopard and want to install the 3.2 drivers on windows 7, however it is to my understanding that i need to install 3.0 from the DVD first. Is there any way around this without ordering another copy of snow leopard? ?25 might not seem a lot but on a student budget i would rather not shell out.
View 1 Replies View Related