I know that we can store the VMs (either Fusion or Parallels) on an external drive and launch from it.
But is the speed the same compared to the VMs residing on the internal HD?
Any downsides to storing it on external HD?
(My EHD is USB not firewire).
I'm not very good at computers, and I don't know a lot about them, so please bear with me.
I want to install VMware on my iMac, so I'll be able to use Microsoft Office 2007 for Windows, which supports VBA, which I need for my work.
But I've heard a lot about how it's possible for something to go wrong while using the virtual machine, which might cause the whole HDD to get corrupted, as I've read here.
So I'm going to install VMware on my iMac, and partition my external HDD (111GB) so that I can install a virtual machine (Windows OS) on it, without risk of corrupting the whole HDD.
Now here's the big question:
If I were to install the virtual machine onto this external HDD, would I still be able to disconnect it from my iMac when I'm not running neither VMware nor the virtual machine at all? Would my iMac be alright if I were to start it up without the external HDD connected?
I ask this because I use this same external HDD to transfer big data files to and fro from different computers. So I will need to disconnect it from the iMac frequently.
My question is pretty simple. Can I store virtual machine files on an external disk? I use Parallels 5 and have an Intel X 25 160 SSD and to conserve space I was wondering if I can move the virtual machine file out of Users/Me/Documents/Parallels folder to an external disk and load it from there?
I tried and received an error message. Something about a pvm file not compatible?
trying to open DVDFab 6 under VMWare Fusion 2.0.5. All of my other needed applications run fine in VMWare, and DVDFab runs great via Bootcamp (Windows 7 RC 7100). My last hurdle to be fully switched over from my old PC is to get DVDFab up and running, preferrebly in VMWare so I don't have the hassle of having to reboot.
View 4 Replies View RelatedI have tried both Parallels and VMware, but neither one will connect to the internet. I've searched all over for solutions for both and have yet to find something that will work. I've tried setting in each app as well as in OSX, but to no avail.
Let me know what information you need about my setup.
I am trying to setup an XP virtual machine with its own IP address on the iMac so I can remote into it from my laptop. I have tried both VMWare Fusion and Parallels to do this. But the VM only sees the network in Shared mode (called Bridged mode in VMWare). But in that mode, the VM gets a random IP address not in the same subdomain as my local network.
When I change the networking mode to Bridged (called NAT in VMWare) the VM gets an IP in the correct sub domain (192.168.0.xxx) and it gets the auto configured Gateway (192.168.0.1) and DNS Server (192.168.0.1) but I can't see any machines on the network. I can't even ping the router (192.168.0.1). The only thing I can see (Ping) is the host iMac (192.168.0.3). But I can't see any other machines or connect to the internet.
I am getting identical behavior in both Parallels and VMWare fusion which makes me think I am doing something wrong.
I just bought my first mac a few days ago. It's a white macbook with snow leopard. I'm still getting used to everything on the mac side
I partitioned the 250 GB hard disk as:
Partition 1: 70 GB, Mac OS X
Partition 2: 150 GB, FAT32 for data sharing
Partition 3: 30 GB, FAT32 for Windows XP running through bootcamp
Everything works fine so far, OS X and Windows XP can see all three partitions. Now I'd like to run Windows in a virtual machine. I've done a lot of searching and can't find a solution where both Mac OS and the virtualized machine can see the large FAT32 shared Partition. Is there any way to make this work, and should I use VMware fusion or parallels?
If this is not possible, can Mac OS at least see the shared partition and copy files to the windows partition while the virtual machine is running so that the windows parition can access some of the files that were originally on the shared partition?
I was under the impression that a Windows license is per machine (i.e. a single license can be used to install it in bootcamp AND in a virtual machine) -- is this correct?
Is it the same for Office 2010 Pro?
I just bought my first Apple, a 13" macbook pro. I'm using VirtualBox to run windows xp 32bit to run a few windows only applications.
I can't seem to adjust the screen resolution in windows to 1280x800 (fullscreen for my laptop display). Please let me know if there is a nvidia control center software or something else I need to accomplish this.
I had Parallels installed on my Mac and a Virtual Machine set up. I then installed Fusion and made a Virtual Machine with it. I am MUCH happier with Fusion!!! How do I uninstall Parallels AND the Virtual Machine associated with it? When doing this, my Fusion and its Virtual Machin
View 6 Replies View RelatedWindows works fine and I downloaded IE7 from the Microsoft website. The issue is, I was doing the windows update and after it installed Service Pack 2, I can no longer use the Microsoft update or Windows Update to go any further.
View 2 Replies View RelatedI have Parallels desktop to run virtual machines, but I don't have a copy of XP on CD or DVD because it was pre-installed on my laptop. I tried following this article on creating a bootable disc from a OEM Version of XP Pro.Unfortunately it won't run when attempting to open it in the virtual machine. It stops and says "Missing or corrupt INF file txtsetup.sif"
View 7 Replies View RelatedI have a few relatively light-weight Windows-only programs that I need to start using on my Macbook Pro. I'm deciding whether to install them on Bootcamp or use VM Ware Fusion.A couple questions please1) To use Windows with Bootcamp, do I need to install Windows XP on Bootcamp?2) What is your opinion? Go with Bootcamp, or install a virtual machine? I am aware that Bootcamp requires a restart to return to my Mac - and that programs will work faster on Bootcamp over a virtual machine.3) But what if I installed BOTH (Bootcamp and a virtual machine using VM Ware Fusion) just until I figure out what I prefer? Does that mean that two separate instances of Windows XP installation will occur on my hard drive?
View 17 Replies View RelatedUnder system properties of my Vista VM... it says Intel Core 2 Duo 2.26 GHz (as that's the processor my MBP has)... but after that it says 1.14GHz... what is this about?
Also, I tried to Run the original Call of Duty today, and it said it could not open "OpenCL" or "OpenGL"... can't remember... it said to update my drivers? Why would this be? I assumed with the latest technologies it could run an old game, but I'm missing something.
There is an option in Parallels 4.0 to use Time Machine to backup VM. Is this the best way? I have a 1 TB USB drive that is solely for Time Machine, so within reason
View 1 Replies View RelatedI recently upgraded from my MBP to a new i5 iMac, and with the new HD space I'm now able to use some valuable disk space for a windows partition. I installed WinXP (seemed fine in Boot Camp), and began the process of installing Parallels 5. I was able to create a virtual machine, but when I try to run Parallels it goes into a "configuring your virtual machine" window (Steps 1 of 4) that just seems to run and run (ran it all last night with no progress further than about 25%).
View 1 Replies View RelatedInstalled Windows 7 to my Parallels 5.0 setup earlier tonight. Everything went well, but for some strange reason, I'm unable to allocate more than 1Gb of RAM to Windows. My Mac has 4gigs of RAM and I would ideally like to allocate 2gigs to my Windows VM (I won't be using it that often) but when I open the Memory pane of the Virtual Machine Configuration panel, I'm unable to move the slider in either direction, nor am I able to manually adjust the RAM value. Sure this can't be right.
View 2 Replies View RelatedI've got a external usb hard drive that I want to be able to use on both a Windows machine and a Mac OSX. I want to be able to read & right on both computers.
What format should I use for the drive? FAT, FAT32, or something else.
I just had a second hard drive replaced on my Macbook pro which I have had a little over a year. After the first HD replacement I purchased a WD external drive to back time machine to. Time machine was set up to back up VM to Mac HD and then back Mac HD up to time machine. I am pretty much tech illiterate when it comes to restoring. I have managed to restore the Mac side of the computer, get the VM(Fusion) installed and also installed Windows. For the life of me I cannot find my Windows files. From all I have read there is a chance there may not be any files but I would like to make sure before I begin the long process of rebuilding.
View 1 Replies View RelatedCan ClamXav scan my virual machine, or do I need to install a windows product on the Virtual Machine?
View 1 Replies View RelatedI am running snow leopard + windows 7 on boot camp. All my documents/data files are presently in windows folders on the boot camp partition and I can access them and write them from my mac using Paragon ntfs.
When I try the VM Ware or Parallels boot camp virtual machines, I cannot access the windows folders from the mac. Most of the documentation assumes that one wants to access the mac files from the virtual windows machine. I want to do the opposite. Does anyone know if it is possible to set up the file sharing on either VmWare or Parallels to allow access of windows folders on the vitual machine from the mac?
I have just installed Windows XP with VMWare Fusion (2.0.6) and every time I shut down VMWare and check the size of the virtual machine back in Finder in OS X (Snow Leopard) it has grown by 2GB or so. Why is it doing this and how can I stop it? (It's now 8GB+ even though there is no software installed on the Windows side). I am running these on a late 2007 iMac.
View 3 Replies View RelatedWhen I insert a CD or DVD into my 27" iMac (early 2012) my OSX side doesn't recognize the disk, I can't access data or eject it. However, I can access the disk and its contents thru my Windows virtual machine (Parallels) so I know the drive works. Is this a Parallels settings issue or do I need to change settings/other in my OSX systems preferences?
Info:
iMac, Mac OS X (10.7.4)
I am going to upgrade to Windows 7 sometime soon when it comes out. I have a question though. I know with Windows 7 Pro that one of the features is running XP seamlessly through a Virtual machine. I don't want to fork out an extra 100 bucks, so I am going to just go with Home Premium. My question to you guys is, is there a free third party way to run a Windows XP/Windows 2000 virtual machine with Windows
View 5 Replies View RelatedAnyone else having this issue while trying to open or install an existing Virtual Machine in Snow Leopard using VMWare Fusion?
View 1 Replies View RelatedI used the typical installation in parallels 5, of which it automatically set up the virtual hard drive size. if I find I need more space later on, is there anyway I can expand the virtual hard drive size? I have a macbook pro i7 2010 running windows 7 pro 64 bit.
View 1 Replies View RelatedVery excited to have XP running smoothly using Virtual Box.
But I have not yet found how to have my flash drive show up in my computer
My MBP has a 320GB harddrive with like 240GB used on it but I only have two 250 GB harddrives so you can see the problem I'm in. I would like to combine into a single virtual drive so that it can accommodate my Time Machine backups.
View 4 Replies View RelatedI've got an external drive that was a Time Machine backup drive. It's at the police station as evidence for something and they will not let me take it back. However, they will let me come down and make a copy of it. I might only have one shot at this so I'm trying to think of the best way to do it successfully and quickly.
Can I just bring another external with me, my Macbook, and then copy the files from the Time Machine backup external drive to the other external drive? If so, what is the facility for doing this quickly? I'm kind of new at Macs and am unsure. I do not have an extra Mac that I can simply use Time Machine to restore to to replace it's contents.
I would like to use FileVault to encrypt both my hard drive and time machine back up external drive. Does encryption noticeable slow down the computer.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
