I have a MB Pro with latest Leopard running. HD partitioned into 2. I have a Windows XP Home install CD. How can I get it up and running on my computer? Simple please as I'm not too 'techy'. If possible, it would be nice to install it onto my second partition just to keep things clean on my main one.
View 20 RepliesSo I just partitioned my drive to install Windows and noticed that my hard drive is now making that "crunching" sound that some hard drives make. It started during my Windows installation, and it happens regularly in Windows.
I also briefly hear it while OSX is starting up, but it doesn't seem to happen much in OSX. I've launched a bunch of applications and it is still pretty much silent. Any ideas what could cause this? Could it be NTFS? I have several hard drives in my PC that don't make that sound. I am using a 17" MacBook Pro unibody with the regular 320gb 5400rpm drive that it comes with.
I have a 09 imac 24. I have xp home oem disk that will not complete install. install is fine until it gets to rpcrt4.dll and shell32.dll. It will not copy either of these files. I put the same disk in my macbook and installed perfectly. I used Ntfs and fat32. No good. tried vmware fusion, and same response. apple says call windows, windows says to call mac. I have tried everything and installed in bootcamp but no.
View 2 Replies View RelatedI am about to install XP Home under Boot Camp and have just read through the Apple Boot Camp installation guide and noticed at the start, that it states that "you must use" Windows XP Home with SP2 or above. I have a very old version of XP Home and wondered how I can tell if it already has SP2 on it? The original Windows XP box has "version 2002" on it but no other indication that it has been service packed. I don't want to try it, just in case it causes installation problems.
View 13 Replies View RelatedI have installed Windows 7 Home Premium on my I Mac and now most programms don´t work and this is the reason why i want to install OSX again but I don´t know who this works.
Info:
iMac, Windows 7
I'm going to install windows 7 so i can play games. Would it be faster and give better performance for my games if i install home premium rather than ultimate?
View 9 Replies View RelatedI have a PPC iBook G4 with 1.3 Ghz and 1 GB SDRAM that I bought new in 2006. I've never had a single problem with the machine, but it doesn't have a superdrive and the OS Tiger capabilities are limiting.
Last year I upgraded to Leopard with a .dmg via FW external drive and loved the interface, but with only a 40GB HD I deleted any app I didn't need. Over the summer I bought a new iMac, but I still need the laptop whenever I'm away from my desk. I tried erasing and reinstalling now that I don't have to keep much data on the drive...interested in getting back those non-essential apps. I've done it before with the exact same resources, but this time it's not working. I'm hoping someone out there can tell me what step I'm forgetting.
Here's what I've done:
1. Connected iBook to iMac in target mode via FW and erased/partitioned HD in Apple Partition Format.
2. Reinstalled Tiger on iBook from original disc.
3. Connected iBook to external drive via FW and restored .dmg to smaller partition on iBook.
4. Opened .cdr on smaller partition, saw the Leopard disc image, set the Leopard install disc as the startup disc in System Preferences. Hit restart button in System Preferences and got the little "not happeneing" noise.
5. Went to desktop and opened the Leopard installer disk image and pressed the install/restart button there. Reboot was slow and dark at first, but ultimately booted Tiger.
6. Went back to System Preferences, selected Leopard install disc as the startup disc again, locked the selection and restarted...booted Tiger again.
7. Tried these tactics again while holding option key and then S key at restart, but the second partition with the installer was never recognized. Tried from Safe Mode, only booted Tiger.
8. Then I tried connecting the external drive again and opened the .dmg, then .cdr from there. Again System Preferences recognized the installer, but it would not boot with the same variables as before.
9. I connected the iBook to the iMac in target disc mode again and ran disc utility, all good. Then I did same with external drive, all good. I made sure both drives and the install disc image were bootable. Tried the boot again from both, all bad.
10. I did a lot of reading on troubleshooting this process and thought it might be a permissions problem, that the installer was not executable. I did a terminal tutorial and managed to make the partitioned drive and disc image both owner enabled. Still the exact same results as when I started.
I am trying to install Snow leopard 10.6.3 to my laptop from 10.5.8 version I have. I am get an error code saying I am unable to do so due to the disc not being able to be partitioned. I've tried going to disc utility to partition the disc but it says that I cannot due to the disc being a start up disc. How do I upgrade my software?
Info:
MacBookPro, Mac OS X (10.5.8), want to upgrade to snow leopard
have partitioned my drive and it restarts my machine once I've inserted my windows 7 disc. It then reboots but stalls on black screen saying no bootable data???
View 4 Replies View RelatedI am new to this mac community.. And just received my 27" i5.
I am trying to install Windows 7 via bootcamp. I opened Bootcamp Assistant, and when i click continue, i get this popup.
"The startup disk cannot be partitioned or restored to a single partition" The startup disk must be formatted as a single mac OS Extented volume or already partitioned by boot camp assistant for installing windows.
I click OK.. And same message reappears
I cannot go ahead.
I have my 1 TB Disk partitioned as follows
500GB for Mac - Which is Mac os Extended (Journaled)
408 GB for Movies - Which is Mac os Extended (Journaled)
91 GB for Windows - Which is Mac os Extended (Journaled)
Now what do i do to get bootcamp work.
I ran Bootcamp Assistant and assigned 20 Gb of space to windows - leaving 115 Gb free. I had defragmented my harddrive using iDefrag and then I ran the partition. Afterwards I got the common error "The Disk Cannot be partitioned because some files cannot be moved. Backup the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume." Is there a simple way to fix this problem (I have looked on the web) without having to run disk utility and format the harddrive.
View 1 Replies View RelatedI'm trying to create a partition for Windows, but I'm getting the message "disk cannot be partitioned because some files cannot be moved." A poster in another thread concerning this problem said that to create a partition, Bootcamp needs continuous space or something. I do have many large files, and I had up to 3 GB free out of 180 a few minutes ago until I deleted some files to get about 58 GB. I tried partitioning with 45 GB and got the error message. I also tried lower numbers, but nothing worked. I'm assuming it's because my files are fragmented. Then I looked up defragment in the forums and found that many people are against it whether it's because it "slows down the computer" or "it is unnecessary." Now I'm in a bind because I don't want to reinstall my OS, but now I'm hearing I shouldn't defrag either.
View 10 Replies View RelatedI put a new HD in about 4 months ago, and I'm trying to partition bootcamp and got this error message.. Do i need to Reformat my HD?
View 4 Replies View RelatedI'm trying to re-partition (i removed the first one so i could make it bigger). When i try and make a 100gb partition through bootcamp, after working for an hour, it says this:
Quote:
The disk cannot be partitioned because some files can not be moved.
Back up the disk and use Disk Utility to format it as a single Mac OS X Extended (Journal) volume. Restore your information to the disc and try using Boot Camp Assistant again.
What does this mean and how do i do this? I opened disk utility and can't work it out.
I just recently bought my first macbook pro. I had a 500 GB WD elite passport drive. I partitioned it to Mac os extended (journaled)- for time machine and FAT for windows and mac file transfer and storage. I used disk utility to partition the drive. These two drives are detected in my mac, however when I plug in the external drive into my windows- no pop up appears telling me to open files. So I go into my computer and click on the (F) drive in my case. Windows vista then proceeds to tell me the drive must be formatted before it can be used. What problem do I have. All I want is 2 partitions one for time machine and another that will allow for data transfer and storage. I have looked but cannot seem to find and answer. I have a 160 gb hard drive, what amount of space do you recommend for the time machine partition.
View 4 Replies View RelatedBack up the disk and use Disk Utility to fomat it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
I don't have anything to backup to, so what can I do?
I got all the way to where it says, please select which HD you want to install vista on, and i picked the one that said Bootcamp, which I earlier partitioned, but it said it wasn't NTFS. How do I make it NTFS? I thought it would automatically do it.
View 1 Replies View RelatedI have a program that I must run on Windows as it is not supported on Mac. I have a MacBook Pro running OS X Lion 10.7.3 with a partioned drive Running Windows 7. Currently, I am rebooting to access the Windows side, but will eventually use the parallel software that is available, but baby steps first. (I am a new Mac user by the way, trying to get rid of the PC, but have found our accounting software is not supported for mac - inconceiveable I know!). So, I have an executable file that I need to launch and cant quite figure it out. I also have Boot Camp, but honestly don't have a clue what it does.Â
Info:
MacBook Pro, iOS 5.0.1
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies View RelatedI installed Windows Vista, and Vista boots up fine. However, I hold down the command keys when starting my computer up again, and it won't let me select Mac OS X. It just starts Vista.
On "My Computer" in Vista I see "Bootcamp (C" and "Macintosh HD (E in my Hard Disks Drives. Also, whenever I start up Vista it tells me something about a wrongly formatted drive. My files are still all in the Mactintosh HD drive, but I don't know how to start up Mac OS X.
Does anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
Perhaps my Google skills are fail today, but I can't find anything there or on Microsoft's site about whether the Windows 7 Home editions retain the just-one-processor (with however many cores) rule. Anyone know if I'll be able to access all eight cores on my Mac Pro with Win 7 Home Premium?
View 2 Replies View RelatedI tryed to install windows xp on my mac and my disk was too scratched so the install failed. So i held down the power button on my mac until it turned off. Big mistake. Now whenever it boot up, it says press any button to boot from cd. I tryed installing rEFit, it installs but doesn'ty boot into the boot loader.
View 3 Replies View RelatedLooking to use an SSD in a new MP, as a boot disc. Is there any way to designate where the home folder is during installation (and thus avoid a write/delete on the SSD volume)? I know the home directory can be moved after install, but my question is about keeping it off the SSD alltogether.
View 13 Replies View RelatedLooking to use an SSD in a new MP, as a boot disc. Is there any way to designate where the home folder is during installation (and thus avoid a write/delete on the SSD volume)? I know the home directory can be moved after install, but my question is about keeping it off the SSD all together.
View 13 Replies View RelatedI have a new Imac and will soon install Leopard
I have in my office 2 Dell PCs that came with Win XP Home which were installed and activated, but are no longer used at all since I had to replace XP home with Win XP Pro due to office networking needs.
So, can I use the Dell Win XP Home Disc (which I really, no longer use) to do the install on the Imac and will Microsoft let me activate it? (I suspect I will have to call them.) I can get the Product Key Number off the side of the Dell tower. That would be a nice savings.
One more question, if I can't use my existing disc and have to buy a fresh Windows OS, would I be better off buying XP Home or Vista Basic. My real need to install Win is just to run MS Money and Word Perfect (I have Word on the Imac but all my previous docs are in WP).
I'm trying to install the Xvid codec for Quicktime. And in the ReadMe file it tells me this his how I install the codec:
To install this component, just drag the File "XviD_Codec 1.0 alpha.component" into Library/QuickTime. The Library directory can be found either at your home directory (to install just for the actual user) or at the top-level of your startup volume (this needs an administrator account). Do not put in: /System/Library/QuickTime.
It is possible that the QuickTime directory does not yet exists. In that case you can create it yourself. Pay attention to capital letters if you use a case sensitive file system (i.e. UFS). But I haven't got a clue where the Home Directories are.
I installed Snow Leopard on a separate HD I put into the lower OD-bay of my Mac Pro. I created a new account under SL with the same name as my old one under Leopard and migrated only my apps folder using Migration Assistant. Then, in the Accounta prefpane, I did a right-click on the newly created acocunt and pointed it to the "old" home folder on the Leopard drive. The problem is: Somehow Snow Leopard has no access to the folder! Any suggestions on what I missed out on? Right now I'm upgrading my old Leopard installation to Snow Leopard in order to make my "old" home folder a "Snow Leopard compatible" one. Don't know whether this makes sense. EDIT: Or is it because my new account surely has a different user ID and if so, what would be the solution? "chown" might break something, I guess.
View 4 Replies View RelatedWhen reading the setup guide for bootcamp, the page that lists what you need for the process says "Windows XP Home Edition or Professional with Service Pack 2 or later" is required...However, the installation disk that came with my Windows XP reads Service Pack 1, Version 2002.What should I do? Can I proceed with Service Pack 1? If not, how do I get service pack 2?
View 4 Replies View Relatedhow to install Canon Printer MX340 (Wirless connection)Â
I am using Canon Printer MX340, My Mac OS is 10.7.3. I can't install this printer via home network. Even i install original installer from canon, keep asking me what is printer administrator password.Â
Info:
MacBook Pro, Mac OS X (10.7.3)
