I cant create partition because it says that i should have a unique partition...
I have two partitions, one for system and other for data (Music, photos, etc)
Bootcamp assistant only work if i have one unique partition?
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
I realise I can't resize the partition my OS is running on...but bootcamp seems to be able to do it for windows. Is it possible to use bootcamp to create a windows partition but then install OS X Server on it instead of Windows?
Or is there magic I'm not aware of?
I'm having grief trying to create a new windows partition on my MCP. This is a similar problem to a million others that I've read on google, but slightly different and I cant get to the bottom of it. So, I had a 100GB hard drive running 10.5 and created a 20GB partition for XP. All good, all worked. But 20GB wasnt quite enough so I purchased a new 160GB drive and used Carbon Copy Cloner to create an exact copy of my OS X partition on the new drive. Removed old hard drive, installed new one and OS X runs like a dream still.
However, now I go to make my windows partition using bootcamp assistant and get the following error: "The startup disk cannot be partitioned or restored to a single partition. Back up the disk and use Disk Utility to format it as a single Mac OS. Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." Thing is, there is only one partition on my drive when I look in disc utility. I could just format the drive and restore using carbon copy cloner I guess, but I'd like to avoid that hassle.
I have Windows 7 installed on my sons MacBook Pro.
The Drive is partitioned at 500GB for Windows and 300GB for Mac.
In windows, I need to shrink the Windows drive, and then create 2 extra drives from it.
However, I can shrink the drive, but when I try to Format, it tells me that it cannot find the drive, and then it changes the drive types to all "Dynamic" including the Mac Drive.
And once this happens, I can no longer access the Mac drive during Boot, and windows will not load, as it cannot find the drive during windows boot up. And which point, I have to restore the system and it takes up to 6 hours to installed Lion, as my Internet is slowing that a cold winters day.
So, my question is the following.
How can I successfully shrink the drive.
Then Partition the FREE space
Then Format to NTFS without loosing drive type and integrity?
Info:
MacBook Pro, Windows 7
If you have a late 2006/Early 2007 Core2Duo Macbook Pro (ideally UK-bought 2.33GHz), could you please attempt to do the following: Create a bootcamp partition and install Windows XP pro Install all the relevant updates to your bootcamp partition including Apple bootcamp utility updates Attempt to reboot from windows, either to OSX or back into windows again Let me know the result. I'm trying to investigate if there is an inherent fault in this batch of machines, as mine cannot successfully do this, and i think Apple have a case to answer for, though i may be wrong...
View 3 Replies View Relatedhad a bootcamp partition which I eventually ended up removing again with the bootcamp assistant.Now I want to create the bootcamp partition again, and when I start up the assistant, there is a 5gb leftover partition of the old bootcamp it seems. I just can't resize it... I've tried anything as low as resizing it to 10gb to 100gb... both fails.I have more than 200gb free space.I have just run a full defrag with iDefrag I've tried to do fileoptimization with techtool pro v5
I tried using camptune (which only works if you already have a working bootcamp partition, which I dont.
I erased my bootcamp partition this morning thinking that was the same as deleting the partition - how do I actually delete the partition and combine it with my MAC OS partition now? I can't do it thru bootcamp
View 4 Replies View RelatedFirst some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
i have a 500 gb HDD in my laptop, I have a partition for Mac, my Files and one for music, Is it not possible to create another partition for Bootcamp so i can install windows for class?
View 4 Replies View RelatedI wanted to create a Bootcamp partition on my MacBook Pro. However, Windows 7 RC 1 claims to require 20GB of space.
View 2 Replies View RelatedI have one unique partition and i will create another to use with bootcamp.
After create the bootcamp partition i can make another for my data without damage the bootcamp partition right?
I am asking because bootcamp assistant only work wit unique partition and i need 3 in total.
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies View RelatedSystem: Late 2008 version MacBook Pro
Hard Drive size: 320GB (203GB free)
OS: 10.7.3
I'm trying to create a Boot Camp partition but I'm unable to make one large enough. Using the Book Camp disk tool, I'm not able to create a partition larger than 68GB.
When I open disk utility, it shows me that ~250GB are used as a startup partition. Is this standard for Lion? My hard drive shows ~203GB free so space shouldn't be an issue. The disc utility tells me the startup partition cannot be resized, locking up the ~250GB so I'm unable to do anything.
Is there a way to resize this startup partition or is my only option getting a larger hard drive. My goal was to make ~100GB partition for Windows and Boot Camp. I used debug in disc utility to look at any hidden partitions but they only amounted to ~250MB, not effecting much.
Okay this i7 iMac is barely a few weeks old and I went today to setup bootcamp and during the partition creation, I get this error:
The disk cannot be partitioned because some files cannot be moved.
Er...WHAT? I don't even know what to do about that one, but it sounds suspiciously like I have to completely redo my Mac which is not going to make for a good Saturday.
Any hints on what in the world would cause this? I haven't even barely used this machine to begin with.
So my iMac came with a 1TB hard drive and I installed Windows 7 x64 but only gave it some 93GB. I have a two-prong question:
Can I add a third partition to my drive after I partition for BootCamp? My main partition ("Macintosh HD" by default) is over 900GB large and I'd really like to cut that up into 2x450GB, for example, in addition to the 93GB BootCamp partition.
Second, once partitioned, is it possible to resize the BootCamp partition to make it bigger after it has been set up?
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
I ran Bootcamp Assistant and assigned 20 Gb of space to windows - leaving 115 Gb free. I had defragmented my harddrive using iDefrag and then I ran the partition. Afterwards I got the common error "The Disk Cannot be partitioned because some files cannot be moved. Backup the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume." Is there a simple way to fix this problem (I have looked on the web) without having to run disk utility and format the harddrive.
View 1 Replies View RelatedI have a 13" MBP with a 250 gb hd, I partitioned the HD 25gb for Windows XP shortly after I bought it. I was unable to install my copy of windows, contacted apple after exhaustive search as to why... Long story short, I now have Vista to install... When I went back to Boot Camp Assistant; partition was gone. Researched... ran disk utility, repaired and erased partition. Bootcamp HD now shows up in desktop, still not in bootcamp assistant. Since I am unable to locate in assistant; would there be any problems with just installing Vista off the install disk by restarting? Any ideas what to do if this is not a good idea (short of restoring)?
View 4 Replies View RelatedI bought this mac last year and decided to put a windows partition on it. I decided the partition was way too small so I erased it and made a new one. This time when I went to make a partition on my hard drive it said the beta had expired. I looked deeper into this message and some sites said to put your clock was to before September of 2007. Doing so I now get this message. Bootcamp assistant cannot open. This version of Boot Camp Assistant is not supported in Mac OS X v10.5. Use Boot Camp Assistant 2.0, located in /Applications/Utilities/. Well first I don't have a boot camp 2.0. So I downloaded the combo pack to make sure my firmware and such was up to date which it was. I still get this error message.
View 4 Replies View RelatedI want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
I have a 13" white macbook, which I had partitioned with Bootcamp. When I decided to upgrade to a 500 GB drive I didn't want to reinstall everything, so after ordering and installing my new harddrive, I used super duper to clone my mac volume onto the new drive. [URL]. It worked like a charm for the mac volume, but did not copy my windows volume. No problem, I figure, I will just run the boot camp assistant again, b/c I didn't have that much on that volume anyway. However when I booted up in my new 500 gb mac drive, the Boot Camp Assistant would not work and generated an error message stating. "The startup disk cannot be partitioned or restored to a single partition. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Only problem is, my drive was already formatted as an extended journaled volume. I erased it and reformatted and recloned from super duper just to double check, but still got the same error message. Then I tried to start from scratch, and erased the drive again and tried to install an operating system from the dvd. I got another error message saying that the hard drive could not be partitioned and that I needed to use disk utility to reformat the disk as a GUID partition. However I couldn't figure out how to do that, and couldn't find anything on the disk utility that said GUID. it took a call to mac support (thanks mark!) to figure it out. Thought I would post it here in case anyone else has the same problem. It turned out that the hard drive I'd ordered was somehow not set up the way as my old one.
The solution was:
1. boot from the mac os DVD
2. go into disk utility, select the new hard drive, and choose the partition tab
3. change the number of partitions from "current" to "1"
4. then the 'options' button becomes available, and you can go in and select to format as a GUID drive.
from that point on, I was able to proceed with installing Mac OS x, install all the software updates, and run the boot camp partition.
Once I had the hard drive partitioned properly I used Super Duper to clone my mac volume onto the new drive, and then used Winclone to clone the windows drive. for some reason the main site for winclone is down right now - two canoes - but I got a working copy here: [URL] none of the help info on two canoes was available yesterday or today either so I had a little trouble figuring out how to use it. (though others have said it's super easy...). I wasn't sure where to save the disk image, on a mac or windows volume and on my old or new drive. The way I ended up doing it (that worked) was:
1. open winclone, and in the 'image' tab, create an image and save it on the mac volume of the new hard drive. (I couldn't save it on the old drive b/c there wasn't enough room)
2. then, still in winclone, go to the 'restore' screen and restore from the mac volume of the internal hard drive to the windows volume.
I finally upgraded my hard drive in my Macbook Pro and am looking to create a partition for Windows 7?
Since Bootcamp 3.1 is out, does it include 64-bit drivers? I recall reading before that trying to get 64-bit to work right was like pulling teeth.
Let me start again by saying I am not very computer savvy. I have a new IMAC running MAC OS X 10.6.1. I am using a 250 GB external hard drive as back-up with Time Machine. The external drive is formatted with MAC OS Extended (case-sensitive, journaled). I have been told that I will be able to read and write on this external drive with both my Mac hard drive and the Windows partition. Is this true?
My plan is to install a Windows partition because I have 2 programs that do not run on MAC. The first takes 5 to 15 MB hard drive space and runs in Windows and can be uninstalled from my old PC and re-installed onto the Windows partition on my IMAC, hopefully. The second is a DOS-based program and takes 896 KB hard drive space. Will a DOS-based program somehow run in the Windows partition? Is there anything special I have to do with this program? It is currently on my PC, and I think I would move the unzipped version of this program to the MAC? I have no disk for this program.
I have a conference call with a microsoft program. I was told that I need to create a windows partition. How do I do this??
Info:
Mac Pro
I have an iMac with a 230gb hard drive, and I've just used boot camp to create a 50gb partition for windows, all seems to be going smoothly enough.
Now, I'd like to be able to take a good chunk of the remaining hard disk space and create a partition that will work between mac osx and windows.
At the moment:
Mac OSX partition = 180gb
Windows = 50gb
I'd like to make a partition (about 120gb) from the mac osx side, and label it "audio drive" (i use audio software and i'd like to run the data on a separate location to the software).
How can I do this in such a way that both OSX and Windows XP will recognise the "drive" or partition? Im assuming I'll have to use Fat32, however Disk Utility won't give me that option (not that I can see anyway)
Edit: The OS's are Leopard and XP Service Pack 3
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
I had deleted my old partition of windows because i needed to add more space so i had delete it.. and start over again and everytime i do it this is what it says
View 16 Replies View RelatedIs there a way to create NT stream files ( ADA-Alternate Data Streams files ) using Mac on NTFS partition ?
View 1 Replies View RelatedSo I am trying to open up my bootcamp partition (running windows 7) in VMWare and I get this error message: Cannot open the disk '/Users/brandonquirarte/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. It was working just fine before the upgrade to Snow Leopard but I am not sure if that has anything to do with it. I had to reinstall Windows 7 after I tried installing the Bootcamp 3.0 drivers so that may be more of the issue. I didn't test to see if would work still when I upgraded to Snow Leopard.
View 3 Replies View Related