I realise I can't resize the partition my OS is running on...but bootcamp seems to be able to do it for windows. Is it possible to use bootcamp to create a windows partition but then install OS X Server on it instead of Windows?
Or is there magic I'm not aware of?
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
I cant create partition because it says that i should have a unique partition...
I have two partitions, one for system and other for data (Music, photos, etc)
Bootcamp assistant only work if i have one unique partition?
I'm having grief trying to create a new windows partition on my MCP. This is a similar problem to a million others that I've read on google, but slightly different and I cant get to the bottom of it. So, I had a 100GB hard drive running 10.5 and created a 20GB partition for XP. All good, all worked. But 20GB wasnt quite enough so I purchased a new 160GB drive and used Carbon Copy Cloner to create an exact copy of my OS X partition on the new drive. Removed old hard drive, installed new one and OS X runs like a dream still.
However, now I go to make my windows partition using bootcamp assistant and get the following error: "The startup disk cannot be partitioned or restored to a single partition. Back up the disk and use Disk Utility to format it as a single Mac OS. Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." Thing is, there is only one partition on my drive when I look in disc utility. I could just format the drive and restore using carbon copy cloner I guess, but I'd like to avoid that hassle.
I have Windows 7 installed on my sons MacBook Pro.
The Drive is partitioned at 500GB for Windows and 300GB for Mac.
In windows, I need to shrink the Windows drive, and then create 2 extra drives from it.
However, I can shrink the drive, but when I try to Format, it tells me that it cannot find the drive, and then it changes the drive types to all "Dynamic" including the Mac Drive.
And once this happens, I can no longer access the Mac drive during Boot, and windows will not load, as it cannot find the drive during windows boot up. And which point, I have to restore the system and it takes up to 6 hours to installed Lion, as my Internet is slowing that a cold winters day.
So, my question is the following.
How can I successfully shrink the drive.
Then Partition the FREE space
Then Format to NTFS without loosing drive type and integrity?
Info:
MacBook Pro, Windows 7
If you have a late 2006/Early 2007 Core2Duo Macbook Pro (ideally UK-bought 2.33GHz), could you please attempt to do the following: Create a bootcamp partition and install Windows XP pro Install all the relevant updates to your bootcamp partition including Apple bootcamp utility updates Attempt to reboot from windows, either to OSX or back into windows again Let me know the result. I'm trying to investigate if there is an inherent fault in this batch of machines, as mine cannot successfully do this, and i think Apple have a case to answer for, though i may be wrong...
View 3 Replies View RelatedI erased my bootcamp partition this morning thinking that was the same as deleting the partition - how do I actually delete the partition and combine it with my MAC OS partition now? I can't do it thru bootcamp
View 4 Replies View RelatedFirst some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
i have a 500 gb HDD in my laptop, I have a partition for Mac, my Files and one for music, Is it not possible to create another partition for Bootcamp so i can install windows for class?
View 4 Replies View RelatedI wanted to create a Bootcamp partition on my MacBook Pro. However, Windows 7 RC 1 claims to require 20GB of space.
View 2 Replies View RelatedI have one unique partition and i will create another to use with bootcamp.
After create the bootcamp partition i can make another for my data without damage the bootcamp partition right?
I am asking because bootcamp assistant only work wit unique partition and i need 3 in total.
System: Late 2008 version MacBook Pro
Hard Drive size: 320GB (203GB free)
OS: 10.7.3
I'm trying to create a Boot Camp partition but I'm unable to make one large enough. Using the Book Camp disk tool, I'm not able to create a partition larger than 68GB.
When I open disk utility, it shows me that ~250GB are used as a startup partition. Is this standard for Lion? My hard drive shows ~203GB free so space shouldn't be an issue. The disc utility tells me the startup partition cannot be resized, locking up the ~250GB so I'm unable to do anything.
Is there a way to resize this startup partition or is my only option getting a larger hard drive. My goal was to make ~100GB partition for Windows and Boot Camp. I used debug in disc utility to look at any hidden partitions but they only amounted to ~250MB, not effecting much.
Okay this i7 iMac is barely a few weeks old and I went today to setup bootcamp and during the partition creation, I get this error:
The disk cannot be partitioned because some files cannot be moved.
Er...WHAT? I don't even know what to do about that one, but it sounds suspiciously like I have to completely redo my Mac which is not going to make for a good Saturday.
Any hints on what in the world would cause this? I haven't even barely used this machine to begin with.
So my iMac came with a 1TB hard drive and I installed Windows 7 x64 but only gave it some 93GB. I have a two-prong question:
Can I add a third partition to my drive after I partition for BootCamp? My main partition ("Macintosh HD" by default) is over 900GB large and I'd really like to cut that up into 2x450GB, for example, in addition to the 93GB BootCamp partition.
Second, once partitioned, is it possible to resize the BootCamp partition to make it bigger after it has been set up?
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
I have a 13" MBP with a 250 gb hd, I partitioned the HD 25gb for Windows XP shortly after I bought it. I was unable to install my copy of windows, contacted apple after exhaustive search as to why... Long story short, I now have Vista to install... When I went back to Boot Camp Assistant; partition was gone. Researched... ran disk utility, repaired and erased partition. Bootcamp HD now shows up in desktop, still not in bootcamp assistant. Since I am unable to locate in assistant; would there be any problems with just installing Vista off the install disk by restarting? Any ideas what to do if this is not a good idea (short of restoring)?
View 4 Replies View RelatedI want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
I finally upgraded my hard drive in my Macbook Pro and am looking to create a partition for Windows 7?
Since Bootcamp 3.1 is out, does it include 64-bit drivers? I recall reading before that trying to get 64-bit to work right was like pulling teeth.
Let me start again by saying I am not very computer savvy. I have a new IMAC running MAC OS X 10.6.1. I am using a 250 GB external hard drive as back-up with Time Machine. The external drive is formatted with MAC OS Extended (case-sensitive, journaled). I have been told that I will be able to read and write on this external drive with both my Mac hard drive and the Windows partition. Is this true?
My plan is to install a Windows partition because I have 2 programs that do not run on MAC. The first takes 5 to 15 MB hard drive space and runs in Windows and can be uninstalled from my old PC and re-installed onto the Windows partition on my IMAC, hopefully. The second is a DOS-based program and takes 896 KB hard drive space. Will a DOS-based program somehow run in the Windows partition? Is there anything special I have to do with this program? It is currently on my PC, and I think I would move the unzipped version of this program to the MAC? I have no disk for this program.
I have a conference call with a microsoft program. I was told that I need to create a windows partition. How do I do this??
Info:
Mac Pro
I have an iMac with a 230gb hard drive, and I've just used boot camp to create a 50gb partition for windows, all seems to be going smoothly enough.
Now, I'd like to be able to take a good chunk of the remaining hard disk space and create a partition that will work between mac osx and windows.
At the moment:
Mac OSX partition = 180gb
Windows = 50gb
I'd like to make a partition (about 120gb) from the mac osx side, and label it "audio drive" (i use audio software and i'd like to run the data on a separate location to the software).
How can I do this in such a way that both OSX and Windows XP will recognise the "drive" or partition? Im assuming I'll have to use Fat32, however Disk Utility won't give me that option (not that I can see anyway)
Edit: The OS's are Leopard and XP Service Pack 3
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
I had deleted my old partition of windows because i needed to add more space so i had delete it.. and start over again and everytime i do it this is what it says
View 16 Replies View RelatedIs there a way to create NT stream files ( ADA-Alternate Data Streams files ) using Mac on NTFS partition ?
View 1 Replies View RelatedSo I am trying to open up my bootcamp partition (running windows 7) in VMWare and I get this error message: Cannot open the disk '/Users/brandonquirarte/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. It was working just fine before the upgrade to Snow Leopard but I am not sure if that has anything to do with it. I had to reinstall Windows 7 after I tried installing the Bootcamp 3.0 drivers so that may be more of the issue. I didn't test to see if would work still when I upgraded to Snow Leopard.
View 3 Replies View RelatedBasically, I created a BC partition for my W7, however, I only gave it 32gigs of space (I only wanted to use it for gaming).However, now I want to install Autodesk 3D Studio Max 2010 on W7, however I don't have enough space on my BC partition to do that...I've researched enough to know that I will need to use one of the following programs:I've read up on all the programs and done some research on them.
Ive noticed most people are having problems with all of these programs when trying to backup a W7 image whilst on Snow Leapord (Mac OS x 10.6, which I am running)I know that is the function of the 3 applications above... But to my knowledge... In theory - I should be able to just backup my W7 using a reliable backup program (Can someone recommend any?) and then delete the existing BootCamp partition, create a new one of 100gig and then just load up the backed up image for Windows 7...
you cant use a windows xp sp1 disk to install windows xp onto your mac using bootcamp.What i wanted to know is if i partition my HD then format it to a recognizable format for windows installation disks, would i be able to install windows xp sp1 that way?or would the same principle apply as bootcamp and sp1 versions of xp are incapable of being installed on macs?
View 6 Replies View RelatedBasically I want to do this: Take my 80 GB External HDD, reformat it to MacOSXExtended (Journaled). Put leopard on it. Boot from my external HDD. Run BootCamp Assistant and make a windows partition on my external HDD via bootcamp.
View 2 Replies View Relatedperhaps I am doing something wrong? I wanted to install Windows XP on my iMac. I previously had partitioned my Mac drives. I backed everything on these drives to my external and blew the partitions away creating my one Mac drive again.
I then ran Bootcamp, created a partition and installed XP. Everything was fine. I then partitioned my main drive and got the warning message about Bootcamp maybe not working afterwards. So I finished partitioning my Mac drive as I wanted and now I don't have the option of booting into XP through Bootcamp. When I try it just shows the Mac drive as my only boot option. I see the XP Bootcamp drive in the System Preferences startup disk area, but I assume I did something to the partition once I partitioned my Mac drives
I'm running Windows7 in a bootcamp partition, along with OSX 10.6.2. I use Dropbox to sync my files between computers, and currently have all of my Dropbox files in OSX. My drive is currently partitioned approximately 75% OSX, 25% W7. I'm trying to save space on my BC partition, and hence, following this guide: (URL)
I'd like to be able to create junctions of the files on my OSX partition and drop them into W7. This way, I don't have 2 copies of each file (one in W7, one in OSX). However, using Link Shell Extension, I'm not able to create symbolic links/junctions etc to the OSX partition. I also tried setting my Dropbox folder in W7 to be the same as the one on the OSX partition, but Dropbox won't allow it. Basically I want to know how I can mirror the contents of a directory located in OSX in W7, without having to simply duplicate all the content.
