Software :: Airport Disables After Sometime
Sep 1, 2009I am using macmini 1.5GHz Intel core solo and using Leopard. Initially it works fine for 15-30 min and then doesn't work for whole day. what is the cause?
View 4 RepliesI am using macmini 1.5GHz Intel core solo and using Leopard. Initially it works fine for 15-30 min and then doesn't work for whole day. what is the cause?
View 4 RepliesI have just used Bootcamp to install Windows XP on my girlfriends new Macbook. It worked quite well but there seems to be one small problem. When the computer has been booted into Windows, then the next time OS X is started the "Tap to click" function is disabled. When I go into system settings to enable it, I see that the check-box next to "Tap to Click" is checked. So to make it work I have to remove the check-mark and the click it again - then it is enabled again.
How can Windows cause this? It has me a little worried that it can have such an effect. To my knowledge the two systems should be COMPLETELY isolated from each other so the only answer must be that Windows actually changes some setting inside the trackpad that is remembered during boot. That is, a setting in the actual firmware or something?
I've been using a custom login background tile by the usual method; replacing NSTexturedFullScreenBackgroundColor.png in System-->Library-->Frameworks-->AppKit.framework-->Versions-->C-->Resources. After the 10.7.4 update, my custom tile is still in the correct place, but the system is displaying the stock login .
Info:
Mac Pro, Mac OS X (10.6), 8 x 2.8 GHz 10 GB RAM, Radeon 4870
First, some info on my computer:
- OS X 10.9.3
- Adobe Creative Suite 5.5 version 7.5
- Office 2011 14.4.3
- Suitcase Fusion 5 16.2.0Â
As a graphic designer, I've accumulated thousands of fonts. In an attempt to clean this up, I recently purchased Suitcase Fusion 5. I transferred the fonts by going into Font Book and selecting "Restore Standard Fonts." I then took the Macintosh HD; Library; "Fonts (Removed)" folder and added those to Suitcase Fusion 5. Â
Then I went back, and added about five of the removed fonts back into Macintosh HD; Library; Fonts — just because they are fonts I use frequently — as well as the Microsoft folder of fonts.Â
Now, for some reason, every time I start my computer (I shut down every night before leaving my office) about half of the Microsoft fonts are disabled by font book. The next day I enable them and everything works well and they all show up in both my Adobe and Office programs, but I'd really rather not play that game every morning. Again, almost all of the fonts being disabled are in the Macintosh HD; Library; Fonts; Microsoft folder, but only until the Ms or so, after which point they all show up as enabled and work just fine. And then there are a couple of outliers I've marked with an asterisk, that are just in the typical Macintosh HD; Library; Fonts folder that are also being disabled, the most confusing one being ThirstyRoughTextures.ttf, because the rest of the Thirsty Rough family is working just fine. (This single Thirsty Rough file is the only of the five-or-so fonts that I added back into my library after restoring it to standard fonts that is acting up. The others show up in all programs just fine.)Â
Fonts being disabled:
Adabi MT Condensed Extra Bold
Adabi MT Condensed Light
*Arial.ttf (in Fonts folder)
Arial.ttf (in Microsoft folder)
Baskerville Old Face
[code]....
I just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Info:MAC Book Pro, Mac OS X (10.6.4)
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View RelatedThis might seem an odd question but I had to replace my last Airport Extreme base station as it was faulty....I've now got the newer "Dual Band Extreme Base Station". I want to avoid any conflicts with my old settings for my wireless network with my MBP. Should I uninstall the last version of Airport Utility?Is there anything else anyone would recommend before i install or connect the new hardware/software?
View 2 Replies View RelatedCan it? If it can, would Airtunes still work like normal.
In other words, can I be connected to my Airport EXTREME and Airtunes would still work since the Airport EXTREME and EXPRESS are using the same network wifi-name (the Express is just extending the Extreme's range).
When I am on my wireless network at home, I cannot print to my printer (via AirPort).When I go to the router and connect with ethernet cable, the AirPort magically detects itself in seconds.I have Windows 7 computers running bonjour and they can print just fine using AirPort.I was able to print fine wirelessly to the AirPort but today it's not working.
View 4 Replies View RelatedThe latest upgrade of AIrport Utility doesn't support my Airport extreme, but the old version 5.6.1 says it doesn't work in Lion. How was I managing my Airport before th 6 update? What do I do now? Will I have to get a new Airport?
I have DSL service. I have an iPod Touch and an iPad 1 that I'm trying to connect. I just upgraded both iDevices to iOS5. I've been having trouble keeping an internet connection live for them, but now I can't even get the wi-fi to connect.
Info:
AirPort Extreme, Mac OS X (10.7.4)
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS XÂ on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
Just bought a new Airport Time Capsule 3TB for backup purposes and to use as the main router in my home (model number A1470 the latest tall one). I was originally using an AirPort Extreme (model number 1408 approx 6" square and 1' tall) for my main router. Â
I got the TC setup and putting out good wifi signal, but would like to take my Extreme and extend it off the TC to boost signal in other parts of my house, but having some difficulty. I searched the forums and found setup instructions to do this, but I get a message saying, "unexpected error. Try again." Well, tried again and still no luck.Â
Info:
Airport Extreme
After configuring wireless security on my Airport Extreme base station, the Airport Express I use to stream iTunes music to my whole-house stereo system has disappeared. Airport Utility can't see it. Yes, I checked connections. All I get is a blinking yellow light on the Express. The base station works as its supposed to.
I have a 17" Powerbook G4 with a 1.33 GHz Power PC processor. I'm running MacOS 10.5.8
I just purchased an Airport Extreme 802.11a/b/g/n to use as my home wifi router. I have two Airport Expresses 802.11b/g. I want to use one for Airtunes to my stereo and another for wireless printing.
View 1 Replies View RelatedMBP 2.2; OSX 10.4.11; Airport Express 802.11n (version 7.3.2); WD MyBook 320GB (format Mac OS Extended) I'm trying to get the WD HDD setup as a wireless hard drive, but it's not showing up at all in Airport Utility (I don't even have a 'disk' tab in the 'manual setup' menu). Airport Disk Utility just says "no airport disks found." Of course the HDD works fine when plugged in directly to the MBP. I've searched apple support and these forums, but haven't found anything that works yet. All help I have found says use the 'disk tab' in AE manual setup window. What do I do without a 'disk' tab? (or how do I get one?) is this a firmware/software issue with the AE?
View 4 Replies View RelatedI currently have the apple extreme as my wireless router. It works great. I absolutely love it. I have two macbook pro's (wife and I both have one) and use it for my PS3 and Xbox 360. I started a new job and was given a free HP desktop (not my choice, but hey, it's free, so what can I say). The desktop is not wireless and I am not able to put my computer near the airport extreme because my TV already owns that territory. Today I bought the Airport express to use as a bridge (and other things in the future). I have plugged it in. I opened the airport utility using my macbook. It finds my extreme and my express. I select that I want to set up the express. I select that I want to set it up using an existing wireless network. I select my airport extreme. It tells me that it has to restart the express. I wait approximately 3 minutes. It then tells me that the settings to the express have been changed but it's not able to find it.
My main goal is to use the express as a bridge. I have the express plugged in beside the desktop and want to run an ethernet cable from the express to the desktop to allow for wireless capability.
I have a Macbook (white unibody) running Snow Leopard. I have a personal wireless network using an Airport Extreme and I have an external hard drive (WD) connected to the Airport Extreme. I use this hard drive for my Time Machine Back ups.
I just got back from a trip and tried to back up my time machine. I got the error that the back up disk is not available. I then tried to open the airport utilities.
It tells me that "Airport Utilities is unable to find any Airport Wireless devices". I find this doubly strange because I have no problem connecting to the internet on this wireless network which supposedly does not exist.
AirPort Express doesn't show up in AirPort Utility 6.0. I haven't updated the AirPort utility on my laptop, and can find it there. 6.0 doesn't even has a scan button... I've done a hard reset of the AirPort Express, still isn't showing up.
View 2 Replies View RelatedIm abel to be connected to airport sometimes but then my airport stops working completly. the airport symbol is blank ( white) and when i hover over it it says its not installed.
Info:
MacBook
I bought the new airport extreme to extend the wifi range in my household and hoped to share a hdd. Upon my experience and reading the forums, the sharing hdd is not as easy as I thought. But that is not my issue at the moment.
My issue is with extending the network. A couple weeks of ago, I did the setup to connect the two airport extremes together (older round AE & new box AE) using aiport utility. It seemed to have work because the signal was stronger in a part of the house that usually had 0 to 1 bar.
But shortly after, the signal showed itself as inconsistent. The signal strenght is jumpy from 0 to full bars. And right now, I am sitting in a part of the house that used to have 0 bars and now, I get full bars. And yet my mbp cannot see the newer, closer in distance AE.
I recently moved into a new apartment that has an Airport Express connected to a cable modem. The network does not have a password. I want to put a password on it so that not everyone in the building can use our internet.
When I connect to the Airport via the Airport Utility, it recognizes the Airport, but asks for a password when I try to configure it. I tried doing a soft reset on the Airport, but it didn't change anything. Are there two passwords for an Airport? If so, how can I bypass the second one? The "Resetting Airport Express" page at [URL] doesn't answer this question. Do I need to do a hard reset? If so, is there anything I need to know about that? We no longer have any of the original literature that came with the product.
I am upgrading from a g wireless router to an n. I have a Belkin right now that I hate. Neither I, on a mac, nor my roommate, on a PC, can get a consistent connection on it. Needless to say it's going back and I want to get an express or an extreme. I had actually bought an Airport Extreme first and it was lightening fast, but I was told that the Express was just as fast, so I went to exchange. The guy at BestBuy told me the Belkin was cheaper and just as fast, so I bought it. I would really like this to be my last trip to the store for a router. Do I need to shell out for the Extreme or is the Express just as fast if all you need is an n router?
View 4 Replies View RelatedSimple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies View RelatedMac OS X v10.4.11
2.16 GHz Intel Core 2 Duo
I connect to the internet, and therefore my modem, via an airport extreme. I do not have printers hooked up via the airport as they are temperamental at best. So the printers are both hooked up direct to my computer. They are not fax machines.
Can I set up my computer to send a fax through the airport?
If not, do I have to have a phone line direct from the computer to the telephone jack? If so, the only logical jack for the phone line doesn't seem to be a good fit.
Do I have an internal modem, or how do I check to find out?
Under network modems there is "No Information Found". I have a Speed Stream DSL.
My question is:
I have an airport- but due to construction in the place where I recently moved to...there is no internet.
However, I want to connect my Hp printer which is designed for wireless printing but needs to be connect to airport, and I want to plug in one of my hard drives to the airport to use wirelessly.
I don't know how to reconfigure my airport without internet. Is it possible?
This is the inside of my Mac Pro.
I've recently acquired an airport card, but i can't find the cables needed...
i am interested in purchasing an airport extreme and an airport express but want to know if what i'm planning to do will work as i expect. the extreme will obviously be my main base station and the express will be the remote base station extending the network. from what i understand, the dual band feature of the airport extreme means i can have my iphone and macbook pro connecting to the network with my mbp getting 802.11n signal and the iphone the 802.11g? the iphone connecting at 802.11g will not bring my whole network down to that? if that is the case, will having the express extending the network disable that ability since the express does not have the dual band feature? lastly, is the ethernet port on the express only for bringing internet in? if the express is a WDS relay router can i then run an ethernet cable from it to my xbox360 and have my xbox join the network?
View 2 Replies View RelatedI noticed that by default airport and bluetooth are turned on when the Mac is first set up.
What is to keep my neighbor or a passerbyer from accessing my computer and putting something on it since these 2 options are on by default?