I want to put linux (preferably Ubuntu) on my iBook G3 Dual USB. By reading this article I would assume I should go with either Ubuntu or Kubuntu 5.04. What I would like to know is if I should use a later version of Ubuntu (7.10, 8.04, etc...) or should I use Hoary Hedgehog (5.04) like suggested. My iBook has a 10GB HD and 384MB RAM. Also will the Airport card and video out on the iBook work?
View 4 Replies I'm looking for a very easy to install Linux on my old iBook G4 and I would like it to support my Airport card without having to do much configuring. Is there any Linux out there that would be suitable for me? I'd like for it to run fairly fast as my G4 is only 256mb RAM.
I do remember looking into this before but, at that time, the only useable Linuxs didn't have immediate support for the Airport card and you needed to download these drivers and install them from the command line interface and it was very confusing.
got an IBook with its original install disks. OS 9.2. It has Linux on it now and works ok with that. I want Mac OS back on it but when I try to install it tells me that it can't find the hard drive. So thinking that I might have the wrong disks, ( i got it used so not positive 9.2 is correct) I got OS 10 and it does the same thing. When I get to the part that it asks 'where' do you want to install it show no disks at all except the CD drive.
Any Ideas what I need to do? As I said the disks are there and functioning because Linux is installed and works. Is there some type of Utility that I need to run to put a Mac partition back on it? That's my only idea that I can think of. If so what and where can I get it?
My iBook has had a broken hard drive for a while now. I have tried loading a Linux live cd on it, but it's mostly useless because of having no storage. I want to be able to use it on the go. Is it possible that i could use a linux live usb, such as damn small linux, and use the memory on said flash drive instead of a hard drive? How would I go about doing this if I could. Keep in mind that it wont bother me that I won't have much storage space. I really only want to use it for web browsing on the go.
View 11 Replies View Relatedthe hard drive on my macbook pro has died and i am in a foreign country with my install discs for os x in the attic of my house which is rented out! ive borrowed a friends install discs for his macbook pro just to see if i can repair the disk but its either not working because of the incompatibility or the hdd is just broken. i'm not dead set on using os x so i wondered if i can get a new hard drive and just boot with a linux install. i would like to continue using the firewire port for an external soundcard but apart from that i only want it for surfing and doing some php/apache web development.
Info:MacBookPro, Mac OS X (10.7)
FYI I have a powermac G4 dual proccessor with mirror drive doors. im running mac os x 10.4. I am wondering if anyone has installed linux on a similar machine, I would like to know more before I try it. what version is best (ubuntu I heard is good?)? Must you reformat a drive or can you install in on a new internal drive? any information really.
View 24 Replies View RelatedI want to install it alongside my OSX install(specifically Mandriva) but I am not sure if it will work in Boot Camp or what not.
View 7 Replies View RelatedI have a old powermac g4 running tiger. I want to put ubuntu linux on it along with tiger. How do I do this?
View 3 Replies View RelatedI did a search and did not really see anything on it, but has anyone installed a linux distro on an MBA yet?
View 9 Replies View RelatedAs Mountain Lion wont work on Macbook (early 2008), I decided to go with Linux... How can I install it on my macbook?
Info:
MacBook, Mac OS X (10.7.3)
Is there a way to share a Linux Box DVD drive to the air so I can install OSX on the air?
I see in the video they use a WIN BOX.
Can I somehow install Linux (Ubuntu 9.04) on the external disk?It's connected via a USB cable.I've got Ubuntu on a Disc.
View 5 Replies View RelatedDuring a botched Linux install. The partition was 64 GB, but now there are two, one is 45 GB and the other is about 20 GB. No earthly idea how I did that. How to restore them back to one single 64 GB partition, preferably without having to reformat and reinstall OS X.
View 7 Replies View RelatedWhats the nest way to put it on my machine? Virtualising or Boot Camp? Any big issues I need to bare in mind with Mac compatibility? I read that there is some extra work to get the trackpad to work with linux, how easy is this to do?
View 13 Replies View RelatedI just bought a parts ibook from ebay, but I managed to fix it, except there was no hard drive. I currently have a 6 GB HD in it with OS X.3.9 on it, but I want tiger. I have the tiger family pack, so I have a license for it. It only has a CD-ROM drive, so I am wondering if I can buy a 40 GB HD, and clone the one from my G4 onto it.
SPECS
ibook G3- 500 MHZ
192 MB RAM
CD-ROM
currently has 6 GB HD
ibook G4- 1064 MHZ
1.25 GB RAM
Combo drive
40 GB HD
I just replaced the HD in an iBook G3 I have laying around with a toshiba 40gb. The install went fine and I formatted it in disk utility using mac os x extended (journaled). I ran it for errors and it checked out fine. I also ran the apple hardware test CD and everything checked out there too. The problem is I am getting a kernal panic no matter what I do. I started off installing 10.3 and the first disc installs fine, but then when it restarts it gets an instant kernal panic. I tried 10.4 with the same results. Then I tried the 10.2 discs that the iBook came with and it would get the very last step of the install on the 1st disc and would not go any farther. It said "one minute remaining" for over an hour.
I have taken a picture of the error log that shows up and you can see here: The top line got cut off but it says "panic(cpu 0): Unable to find driver for this platform: "PowerBook4,3" Like I said, everything checks out hardware wise and i have tried three different versions of OS X.
I took over my daughters IBook G4 - to surf no problems at all - but when trying to open anything else on it you get the "spinning wheel" and cant do anything. Have the orignal installations discs but the problem is that nothing happens - and the only way to get the installation disc out again from the IBook is to press the eject button when restarting....Its like it doesnt have any connections with the cd/dvd unit at all...When trying to restart and pressing c or all other buttons I have been told I get the message "we are hanging here" and thats it. Do I have to replace the hard disc or what can the problem be. I am only want to reinstall the damned thing....
View 1 Replies View RelatedI want to preface this by saying I've never owned or used an apple computer since Apple IIGS, so I really don't know much about these things so perhaps there is a simple solution or perhaps there is no solution.
story: I received an ibook G4 from a girl leaving the country (model A1055). It has no OS installed. I do not know the specs of this machine as I'm not the original owner and...no OS installed. There are no installer disks. From another friend I borrowed a retail copy of OSX 10.3.
problem: I put the OS disk 1 into the machine and did a restart. Holding the "c" key only leads to panic screen. Holding the option key while restarting gives me a blue screen. This screen has a return error, then an icon for OSX installer disk one, then a forward arrow. No amount of clicking can select the OSx installer icon. my options are only return or forward arrow. all leads to the panic screen
From the other posts I found using search, I'm guessing this computer is too old for this operating system and that's why I'm unable to install it (incompatable firmware?). However I'm not sure how to get or purchase the required older OS for this computer, or even what it is. Frankly, is it worth it financially to even try and track down the required software? Should I simply give up and recycle it? Apple has a recycling program right?
I bought 25 clamshell 466mhz graphite IBooks and whenever I put the HD in and put a disc in the drive to try to install an OS nothing happens, so I pressed the option key and this blue screen with a lock on one side and an arrow on the other, with a space to write in, in the middle. Now what I need to know is what should I do? I can put these things together like no one else but when it comes to software I'm lost. I'm going to try to attach the picture of what the screen looks like but I'm not too good at that either. But if someone can get these things up and running I'll give you a complete (no power cord) graphit clamshell for free.
View 9 Replies View RelatedI've bought a iBook from eBay for my mum and grabbed a copy of Leopard, but every time I try and install it I get the following message:"Install Failed - The installer could not validate the contents of the 'BaseSystem' package. Contact the software manufacturer for assistance."I know the disc itself is fine as I previously used it to install Leopard on my Macbook. I've also just bought a brand new 1Gb stick of memory from Crucial as I read in a few places that "this message is due to faulty RAM in 99.9% of cases".
View 23 Replies View RelatedI'm trying to install Skype (for mac latest version) on an ibook G4 (running 10.3.9). Should be compatible. It downloads okay. It drags to the applications folder okay. It won't launch, however. If you try and launch it nothing happens. The menu bar doesn't change. Other applications download okay and run okay - but not Skype. I've tried deleting it completely and then downloading it again about 4 times and same problem each time. I tried dragging a shortcut to the dock, too, but it won't launch from that either.
View 4 Replies View Relatedmy problem is the following, I have an Ibook G3 which Disk Drive is busted. So i'm trying to install Tiger To it (PPC) by using Target Disk or Disk Target (w/e) mode connecting it with my Mac Book Pro. I restored the Ibook with the disk utility on the MBP putting as source the installer for tiger which I ripped off the img file from the the retail version I bought. And so I rstored it to the HD of the Ibook, takes about 15-10min(Maybe less) and done. When I turn on My Ibook it automatically boots into the installing of OS X process. Everything goes smooth until I get to the part that I have to choose the destination but I can't choose anything because the HD for the Ibook won't show, it doesnt show any possible destination for me to save to. I have read the read me files and everything on the software and about the option botton on the "destination" part but the botton cannot be selected. I read something about the formatt of the Ibook for tiger to work and I have it in "Extended (Jornaled)" and i'm upgrading it from Mac 9 classic, but the drivers for mac 9 aren't installed since I accidentally (w/o knowing) erased everything on the hard drive the first time I did this with the Disk utility.
View 4 Replies View RelatedI have a G? ibook that due to the size of its processor will not allow and upgrade to leopard.If I install a new HD with leopard pre-installed will it work in the G3?
View 4 Replies View Relatedmy hard drive freaked out on my g3 ibook so i went to reinstall tiger on it...i can't get it to boot from an external dvd rom and start the instalation process...it gets a kernel panic and the only thing i can do is shut it off...is there anything that i'm not doing or is the hard drive fubar'd?
View 4 Replies View RelatedI've got a Tiger Retail Disc that I've used on 2 previous machines without a hitch.Now, I urgently need to install Tiger on a 12" 800mhz iBook G3, yet after thirty minutes, it tells me to Try Again!Some erros tell me that there are essential files that can't be copied."Unable to copy package source file /System/Installation/Packages/Essentials.pkg/Contents/Resources/BundleVersions.plist"Some files for Essentials may not have been written correctly"
View 6 Replies View RelatedI was tryin to downgrade my ibook G4 to Tiger from Leopard,but when I inserted and tried to install the Tiger,it says it can't coz need to have a lower OS installed on it, sans my installation of the Panther DVD which came from my iBook many years ago.
View 21 Replies View RelatedI have a 12" iBook G4, 1.07GHz that I'm trying to reinstall OS X on after a hard drive replacement. The new drive is a standard 80GB IDE drive, fresh out of the shrink wrap. Now, when I attempt to run the install it acts rather oddly . . . it runs through the entire install script, but then at the very end errors out and says "try installing again".
I've tried three different OS X install media sets (two DVD and one CDs) and gotten the same result. I've reformatted the drive several times and run the Disk Utility repair tool, which has gone through fine. I've reset the PMU, and pulled the expansion ram and Airport card. Same result.
I'm absolutely at my wits end trying to figure this out . . . . I've tried everything I can possibly think of.
i have a leopard installation disk that came together with a intel macbook 13''.
i tried to install it on my ibook g4 12'' 1.33ghz 768mb ram, mac osx 10.4.11.
it works fine, selected my language.. until when the mac osx installer app pop up. then says that my computer is unsupported. how do i by pass the system check and all?
I have a Ibook G4 that I cannot install tiger to .. I have two problems...
1. When I start with a retail version of Tiger (at least that's what ebay said.) it shows me the grey apple, nice and sharp, and then the screen changes to a horrible, horrible 2 color black and white dithered image of two mighty mouses showing me to add batteries and turn it on. The installer hangs here without a mouse.
2. Since I have a USB mouse (not mighty) I plugged it in and the installation continues but it's still in the horrid black and white dithering (grayscale) that I got on the insert mouse screen.
I can barely read a thing it's that bad... just horrible dithered black and white.
It's not the screen because booting Arch Linux shows a perfect colored frame buffer and the folder with the question mark has proper colors.
Why is an Ibook G4 demanding that I install a mighty mouse to continue installation? How come the track pad will not do? (and yes the track pad does work.)
I bought this machine second hand is it possible that the system firmware is updated to a wrong version?
Because when I check the system info it says Powerbook6,7
I've just bought an iBook G4 and want to put leopard on it - can I use the leopard dvd that came with my macbook pro or do I have to go and get an OEM one from apple?
View 3 Replies View Related