Software :: Changing Default Login Shell For Root User
Jul 17, 2009
I'm running the latest version of Leopard, and I would like to change the default login shell for the "root" user, but the command which works under Unix and Linux doesn't seem to work here. As root, I have done a vipw to change the shell to /bin/zsh (my preference) on the root line. This change persists in /etc/passwd, and it also gets properly propagated to /etc/master.passwd.
However, every time do an su or a sudo -s, I still get sent into the old /bin/sh shell. I have completely restarted the system, and this still occurs (the /bin/zsh entry is still there for root in /etc/passwd and /etc/master.passwd after reboot). /bin/zsh properly appears in /etc/shells, so I know that this is not the problem.
I am using MBP Pro with OSx 10.7.3. I use admin account. Recently I enabled root account and then disabled it back again. Since then I am seeing applications only for root and not for admin even with admin login. If I go to /Users/<admin username>/Library/Preferences, I can see that the applications has relevant files over there. When I looked more carefully I observed that, I am able to see the applications installed for the root only and not for the admin user. Is there any way to corrrect this?
My iMac has suddenly started changing the photos shown at the User Login window. eg: the photo set of user no.2 is replaced by user no.1. Can anyone advise how to delete all the photos stored under 'recent photos used' and start again?
im trying to change my main user picture when i log into my imac. i know the procedure but everytime i go to restart my pc or boot it up its the same old display pic of mine. im using mac lion.
I finally took the plunge and ordered a MacPro quad 2.66. I am waiting for it, and in the meantime I might sell my Dual g5 1.8. The problem is that like this I could not transfer the files from one mac to the other. Second problem is that I run my machines as root in order not to have to deal with any security question (I know, it is a bit reckless, but knowing nothing about unix I started like that with the G5 5 years ago...), and I see that everything is in hidden files/directories that cannot be accessed easily (I thought I could enter in the new machine as root and I could access the root user data on the other disk, but it doesn't work, I tried on another machine).
Is there any clean solution that allows to move one root user from one disk, installed on the Pro, to the boot disk. Otherwise, any unclean (i.e. scripts etc)?
I am trying to use the Apple-approved method of changing a user account short name. This involves enabling the Root User, logging in as root, and then perform a few simple steps. I've done this many times before successfully on many different Macs. However on this particular MacBook Air, while I can enable root and enter the appropriate password via the "Other" choice at the 10.7 login screen, logging in as root fails. Here's what happens:
enabling root user in Snow Leopard (10A421). I tried to find the directory utility in utitlites but couldn't find it. I read in other threads that Directory utility has been removed and all the functionality is moved to user accounts. But didn't find how to enable the root user.
My mum bought a MacBook two or three years ago, but after a while it became unbearably slow. She stopped using it. I recently dug it up to try to do something about it, needed her password for reinstalling the OS, which she of course forgot (the password, not the OS). Anyway, I messed around in Single User Mode and accidentally effed something up - the "Couldn't find root user. Sleeping and trying again." message started flooding the screen.
I read somewhere that I should delete a file that would make the MacBook show me the initial setup screen upon startup, so I did - all was well until I got to the end of registration. When I click 'Continue' it should take me to the screen responsible for creating a new login account - instead there is a grey 1px line in the middle of the light-grey box. I can still click 'Go Back', but that obviously takes me no-where.
I currently have itunes on two accounts set to access a library at /Users/shared/iTunes/. The problem is if iTunes is running on one account and I try to launch it on the other, it gives an error saying it doesn't have write access. It needs to stay running on one for my appletv. Is there a way to start it and have all accounts have access to it as a single process? Run it as root?
an ibook g4 which I believe is running 10.3. Last night Safari kept unexpectedly shutting down, so she restarted her computer and now it will not go past the grey screen with the dial. This is a used computer she purchased from a friend and the CD drive is not working, so we cannot load the install CD to try and solve that problem.
I have used previous answers to check the harddrive in single-user mode by using fsck -fy and the Macintosh hd appears to be OK, but when I try to boot the system in single-user mode, I eventually get the message "membered[68]: Couldn't find root user. Sleeping and trying again".
I was having a lot of problems with my new (Christmas 11) MPB. It was very sluggish and occasionally would freeze. I took it to my Apple Store and the Genius said I was running all my apps in root and had too many files on the desktop.They should be under a user. Any files on the desktop are refreshed frequently, such as graphics (CAD, pictures, etc.) and that was what was killing performance. She then proceded to move my files/apps to my user profile.
Since I am the only user, I never paid any attention to where the files were.I would like to verify the information above and do the same process on two other computers, but I didn't catch enough of what she did to do it solo.
Info:MacBookPro, Mac OS X (10.7.3), I7, 8GB, 750GB, Lion
I recently downloaded some Ensenasoft games on to my mac but on the root user they just jump on the dock a few times then just close. But on my normal user they work why is this?
After enabling the root user and logging into that account I tried to log back into my regular user and found that everything was set back to default. No files, pictures, anything... Â
Going into the Users folder I can see my account and it has all of the files on the desktop and such.Â
How do I log back into my regular user account with all of my settings?Â
I have a server setup with Quicktime Streaming Server. I have installed Quicktime Broadcaster/Quicktime Player on my MacBook. My problem is that I am only able to broadcast as the root user. Also I can only receive a broadcast via Quicktime Player 7.6 as the root user. Is the firewall blocking the rtsp protocol? I am completely stuck and befuddled.
[URL] I can access via server admin but cannot log into the server from the login window at the server itself with the exact same admin credentials that I used through server admin.Â
I have been getting these messages below in the list of feedback that Disk Utility generates during a "Repair Disk Permissions" run for at least 3 years now (through several OS updates). I am currently running 10.6.8 for the past several months.Is there an easy/SAFE way to repait this USER issue? I don't know if it is causing me any problems, but obviously it is not what it should be. [code]
Info: Mac Pro Dual 2.8GHz Quad-Core Intel Xeon (8-core), Mac OS X (10.5.8), 16 Gig Ram, ATI HD 2600 (slot1), GT-120(slot2), Airport Extreme
Today when I turned on my iMac, it went to the login screen and then something odd happened. I saw a second account on the login list that i never made. It is called "Other: and has an icon with lines and spheres (like a networking icon). Also when I click on it, it asks for a name and password.I logged into account and went straight to System Preferences ->Accounts and there is no "Other" in the list of accounts there on the left.just my account. Is this a virus or have I been hacked? Or is this is bug?
Info: iMac (27-inch Late 2009), Mac OS 8.6 or Earlier
i'm using Apple Mac OSX SL in french and I noticed that a few months ago, some of my default folders such as Downloads, Desktop, Images, Videos etc, switched from french to english. So now when I click on Users-MyName I have half the list in English, half the list in French. The problem is, how can I change those folders back in French? I tried to rename them but their names are locked...
A quick question. On the far left side of the dock, what is the default icon that is there? For some reason I seen mine go up in a cloud and I can't remember what it is. Right now I have "Finder, Dashboard etc...
I changed the account preferences (in the System Preferences) so that the username is pointed to Data/users/username
The Finder icon in the dock still opens to to Programs/users/username, even after rebooting. All other apps appear to be using Data/users/username for saving files and other stuff.
How do I change the Finder on the Dock to open to Data/users/username?
For reasons that I will not go into here, I have a first initial and middle name, not a first name and middle initial like most people. It played havoc with the registrar at my college. My Address Book card has my first name as "G" and my middle name as "Ralph". Whenever programs automatically fill in my name, they use my first initial only. For example, Pages puts my author name as "G Kuntz". Is there any way to get my default name to be "G Ralph Kuntz", other than setting my first name to "G Ralph" and my middle name to blank ("")?
I'm using MAC os 10.6.1 and my MBP region is Russian(Ukraine) I want to set my default language in applications (to type - not menu language)as English. How to do it? For some reason all application start and change my Input Source to Russian every time.
