Software :: Cannot Find Disk Utility Under Applications?
Dec 31, 2009
I am quite new in Mac OS X 10.5 (leopard). I just downloaded from windows msdn a .iso file (with the XP Operating system). Now I want to burn it on a CD. I found on the internet that I can do this with disk utility. Disk Utility should be under Applications/Utilities. But it is not there, I don't find it in finder anywhere. (The computer was installed by the vendor). Do I need to install it from my installation disks? I already looked to disk 1, but I do not know what to install.
I'm fairly Technical, I just can't seem to figure this one out. I own a 13 Inch Macbook with the stock 120 GB HD. It was purchased this past September 2008. I bought a new HD from Newegg. Here is the link to the HD. [URL]
I read the reviews, and more than 20 reviews I read said this HD worked perfectly in their Macbook. -So I received the HD yesterday -I put it inside my laptop -I put in the OSX install CD -I powered up and held down C and booted into OSX Installer -From the menu I selected Disk Utility but the hard drive does not show up as listed hard drives
After all attempts failed, I put the disk in my windows machine as an extra sata drive, and it booted perfectly fine, so I know the disk is ok. Some other thoughts? -The difference between the stock and new HD is size and also 1.5 GB vs 3.0 GB Transer rate -Does my Macbook need a firmware upgrade - I doubt this, but just a thought -Does the Macbook not recognize unformatted disks - I doubt this too.
I have a dual 1.25 ghz MDD Powermac G4. It was working fine until a couple of days ago. It froze up, I restarted it. I got a blank blue screen.
Also, the computer made some awful clicky noises that I've never heard before.
I booted from the OS X installation CD. Disk utility lists the WD1800 hard drive, but I can't do a re-install and there's no option to repair it.
I can't erase or partition it because when I try, I get a failure message saying it can't be done ("chosen size not valid for chosen filesystem"). The HD is listed in system profiler... with a capacity of 0 bytes.
I assumed that the hard drive had died, so I went to a local PC shop and bought the only IDE drive they had (a Maxtor 6l250r0). I installed it, then booted from the OS X CD.
I know that new hard drives need to be formatted, but I assumed that this could be done with disk utility.
But disk utility can't find the new hard drive, doesn't list in the left column. It shows the optical drives and the install CD and the old WD hard drive which can't be erased or repaired, but no new hard drive.
It's not listed in the system profiler, either.
I checked the cable connections and tried installing it in the front carrier rather than the rear, but nothing works - disk utility and system profiler can't recognize it.
The only other desktop mac I have access to right now is my old 450 mhz Sawtooth G4. I tried putting the HD into the sawtooth and got the same results - disk utility and system profiler can't find the new HD at all, but has no trouble finding the old 20gb HD and the DVD and zip drives.
I'm... not really sure what to do here. Am I doing something wrong?
I had to power off my iMac by Pressing the power key and holding it several times over the last few weeks. The last time it wouldn't reboot - I'd just get an apple icon. When I tried a safe boot I'd get the icon and it would change to a no entry sign.Next I started up from the snow leopard installation disk with the intent of repairing the iMac disk. The installation disk worked but when I opened disk utility it only found the installation disk. It didn't find the iMac disk.
I bought this Macbook on eBay used awhile back, and it has worked great. I noticed it doesn't have iMovie and iDVD like it should, but that isn't a big deal. It has 10.5.8 OSX on it. I just noticed it also doesn't have Disk Utility as well. I know that I could buy Snow Leopard and give it a fresh install, but is there anyway I can download just the Disk Utility? At the moment, that is the only program I need. I was looking for alternatives, but I couldn't find any.
I am fairly new to the Mac world. The other day I was trying to do a disc copy of a music CD. I followed the instructions within Disk Utility, which resulted in a .dmg (disk image) file being created. However, when I went to burn the resulting file to a blank CD I found that the file was bigger than the capacity of the CD. Obviously, the disk image file itself takes extra space (in addition to the size of the original music files). Is there any other way of creating a 'snapshot' of a CD or DVD? Perhaps 'on the fly', as I do with my PC's?
I'm having a pretty serious problem. I attempted to erase the free space on my HD, as I do from time to time, except this time it appeared to hang/freeze at the end, when it gets to the part where it creates a temporary file. I waited for several minutes and it didn't move. I tried clicking the skip button, but that did nothing either, so I force quit Disk Utility.
The problem is, it left the disk at "Zero KB" of free space, effectively making my computer inoperable. I was in the process of studying for a huge exam tomorrow, and am currently flipping out.
If it matters, I'm on a Macbook Pro 2.33 GHz Core 2 Duo, running 10.4.
I really don't want to have to reinstall the OS and import the old files, but my real fear is that I will have to do a fresh install of the OS.
I have a Windows Ultimate DVD. I want to make a back up of it and use this DVD when I need to install Windows on my machine. If I make a disk image of this DVD and then burn the image back to a DVD will it function or do I need another tools? ( like toast )
I've a lot of files in Mac and my time machine back up drive now. Since most of my files are spreadsheet, doc, MP3 files and they can inter use in my Mac and Windows 7 PC. There are 4 Mac partitions and one PC partition in Mac Disk utility I can use. Do you know which partition I can use and Windows 7 PC will see them. In this case, I can just use that partition transfer the files form Mac to PC?
For some time now, Disk Utility simply won't open on my MacBook Pro. Actually, it opens and closes in less than a second. There is no error message. Everything else on my machine runs fine, other utilities like Cocktail etc. don't report errors. Very vexing. Any similar experiences or fixes?
I bought a WD My Passport 071A Media 1TB External Hard drive yesterday and was hoping to use it for my Mac and PC laptop. So I plugged it into my mac and it asked me if I wanted to use it for Time Machine and I said yes. It reformatted it and then I realised i wanted to partition it so I went to Disk Utility and split it into two partitions, one 50GB for Time Machine and another 950GB for my other storage, and made that FAT32 format. So I copied a song onto that partition and noticed it was copying really slow, so I copied the same song to the 50GB partition and my other 1TB non-portable hard drive which is also FAT32 and it was normal speed. So I thought I should try removing the 50GB partition and halfway through my computer froze and I had to reset it. Now my hard drive won't work in Mac or Windows and when I open Disk Utility, I see it there but when I click on partition, it freezes and I have to Force Quit the application.
I have a LaCie d2 160GB hard drive hooked up via FW800 to my PowerBook and I've decided to resize some of the partitions on the drive. I've done this before without troubles, and running Verify/Repair Disk on the drive reports no errors, but when I go to resize any of the partitions on the drive.
I forgot the name of a small app that allows to browse a disk and calculate folder sizes in order to clean a disk. I think the icon was a disk with a broom over it.
Well i'm trying to burn a disk image onto a DVD-DRL using disk utilities. I get everything all into disk utility and the blank cd is there and the DMG. When i select burn and the burn options comes down, It only allows me to burn to the super drive and not to the blank DVD. I tried going along and just burning it to the SuperDrive and it didn't work.
I'm trying to use my 500 GB external HD as solely a storage drive now whereas it used to be storage and backup, with separate partitions for each. I have deleted the backup partition (the first partition) successfully with Disk Utility, but how can I resize the remaining partition into the free space before it on the disk? I can't drag it or enter the desired size in the text box, it doesn't seem to want to get any larger. Is there any way to do this without purchasing ipartition? I have an old version from Tiger, but I'm not sure if that will work safely on leopard, and I do not want to lose my rather larger collection of ripped dvds on this external drive. Here's a screen shot of what i now see in disk utility.
I have an external 750GB hard drive that I previously formatted as FAT 32 because I wanted to be able to plug it into Windows computers as well. I was not very thoughtful at the beginning and I just created one big 750GB partition. I currently have 450GB used and about 300GB free.
I would like to create a new partition in the free space without losing the data I have in the disk, and format the new partition as Mac OS Extended to use it for Time Machine backups. Presumably Disk Utility can do it, but when I go to the "Partition" tab it says "This partition cannot be modified" and the "+" sign below it is grayed.
The hard drive is a 1TB Western Digital my book I bought it in January I think. I tried to format it to Mac OS Extended (Journaled) when I got it but for some reason every time I try to erase the part thats named disk3s2 or partition the main one it stops a little before half way through. I don't think its the hard drives fault so I called apple about it one day and they helped a little but it didn't work. Thanks in advance if you can help me. Also a few times I waited about seven hours for it while I was at school and when I came home it didn't move.
After I erase the hard disk it shows 74.5gb free, almost. It says there is 42.3mb of space being used by 2 files which I understand are used for read write or partitioning or whatever.
When I then leave disk utility and go to the actual installer, the destination disk (untitled - 74.5gb) shows only 73.9gb free space. What is taking up an additional 500mb of space on the hard drive?
Apple support told me that somehow the disk has been altered and I lost space on the disk or I am now using a seperate partition that isn't showing up. Disk utility shows only one partition with 74.5gb free space. He told me I can find information about how to 'merge' the disk on the apple support section under troubleshooting articles for disk utility. I have been unable to locate this information.
I am trying to repair my disk so I can install bootcamp, but when I reboot my machine and run disk utility and choose repair disk, it hangs. Does anyone have any ideas ?
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
I get this question mark along with a folder when starting up. I tried holding down the option key when turning on the power and then I get an internet recovery along with a globe. I click on the arrow below it and it takes maybe 15 minutes to start up. Then i get this disk utilities screen. I'm now unable to do anything. When going into disk utility, disk 0 shows with Mac OS X base system underneath it. All the clickable buttons are faded out. Is there something wrong with the hardrive? and where could i get this fixed? There isn't a warranty on it.
Running Diks Util on my iMac 10.6.2. i am given this warning. ========= Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent" has been modified and will not be repaired.
Is it something I should heed and what to do in that case?
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
I'm trying to repair my hard drive. I restarted from the OS X Mac Mini install CD (holding down the letter C when I heard the chime), opened Disk Utility from the Utilities folder, selected my hard drive image, but the "verify disk" and "repair disk" options are grayed out. I'm at a loss as to how to proceed.
I have 43GB available on a 120GB drive on my MacBook base model and I'm trying to partition via BootCamp.I'm trying to allocate 32GB to the Windows partition but I keep getting the following error message:Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.Now I've backed up my disk and launched disk utility, and try to follow above directions here but the Mac OS Extended (Journaled) area is grayed out and when I click apply after highlighting the MacBook are (in blue), it errors out and says the disk is out of space.
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
