i'm having trouble getting my 12" powerbook to display correctly on my 20" dell monitor. i've read that it can work, but i haven't read instructions on "how to". can anyone help me out with this, since i seem to be incapable!
all i'm able to do is either stretch the image or have black spaces on the sides (i guess not in widescreen mode)
setting up dell printer V515w? have tried downloading several different drives and the response is they are not compatible.
View 4 Replies View RelatedI am setting up a Dell 1355cn printer that has a scan to network feature. I have enabled SMB networking in my system preferences. Now I need to know how to get the scanner to scan to a shared folder on my Mac. These are the settings I have tried but so far I am getting an error on the printer.
D01 Namee.g. PeterShare, Sharedfolder Server TypeSMBFTP (ftp://Server Address/Server Path)SMB (\Server AddressShare NameServer Path)Server Addresse.g. myPC, XXX.XXX.XXX.XXX
Share Name
e.g. SMB (Share, Sharedfolder)Server Pathe.g. FTP (pub, pub/share), SMB (finance, financePeter, financePeterSales)Server Port Number(139, 5000 - 65535) Login Namee.g. FTP (anonymous, Peter), SMB (Peter, DomainPeter)Login PasswordRe-enter Password
Info:
MacBook Pro, Mac OS X (10.6.7)
I need help setting up network printing. I have a new router N600. I can not see the printer.
Info:
MacBook, Mac OS X (10.6.8)
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
View 8 Replies View RelatedI'm looking for a new monitor to go with my MBP, and I'm stuck trying to choose between the ones listed above.
The 2407WFP is a couple of years old now I guess, but it's the rev A04 version, which supposedly fixed the (few) problems with what was otherwise meant to be a great screen. It's an sPVA screen.
I've heard good reviews of the G2410, with its LED backlighting. It's still a TN panel and I hear so much bad stuff about them.
The 2209WA is an eIPS panel which I like the sound of, but it's smaller and lower resolution.
The F2380 is a cPVA panel, the image quality looks better but I've heard bad things about blacks on this panel.
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
View 3 Replies View RelatedAs you probably noticed from looking at my sig, I have a new G4. It has been pretty heavily upgraded, with a 1.4GHz CPU, 1.3GB RAM, two 160GB drives in RAID, a dual-layer DVD burner, a Geforce 6200LE 256MB, an Airport card, and Leopard. I bought it because:
a) Didn't have a Mac
b) wanted to set up a file server
So, how would this work? What I want it to do is serve music, pictures, movies, and documents throughout my house, and I actually need it to work with a few operating systems:
- Jaguar
- Tiger
- Leopard
- XP
- Vista
I don't have to go out and get 10.5 Server, do I?
i just bought a old ibook looks to be from early 90's. setting up a email account. i have a aol account but doesnt seem to recognize it.
View 1 Replies View RelatedI have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:
1) How do I determine the max RAM I can put in this machine?
2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.
I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.
So is the is Powerbook G4 802.11g or b? it is the 1.25GHz model. Also, one thing I don't understand regarding the airport extreme or any airport for that matter: isn't the maximum speed going to be completely determined by how much the cable provider, Comcast, pumps out?
If this is the case, how do I determine what my transfers and speeds are looking like specifically for Comcast? And, how would an airport extreme improve upon this or any other performance aspect in this regard?
Powerbook G4 (Ti-book) 667 mhz, 512 mb RAM. I finally after YEARS upgraded my OS (10.4.10), yay me! Just bought Adobe CS3 (for the new IMAC we have yet to buy), but I would like to install it on my Powerbook. SO, it it time to bump up to 1GB RAM. I was told it was tricky, and I should take it in to the apple store to install, but then I took a look under the keyboard, and it looks pretty simple. i have installed new RAM on a G5 tower, and this looks way easier. So, I am planning on buying the RAM either online or at FRY's, then installing it. BUT, I know I have to be careful of what type of RAM to buy. I found what I think will be good at [URL] but I will have to buy 2 (512's) as mine currently has 2 (256). I guess I just want to make sure I am not going about this the wrong way before I drop about $200 for RAM upgrade...
View 3 Replies View RelatedI have a 15' Powerbook G4 1.67, currently with 512 of ram....so i'm shopping for an upgrade, but not sure which specific type to go with. In my system profile it says i'm running..
Type: DDR SDRAM
Speed: PC2700U-25330
And these are the types i've been seeing to choose from.
G4 15-inch 1.67GHz (DDR M9676LL/A) Memory
G4 15-inch 1.67GHz (DDR M9677LL/A) Memory
G4 15-inch 1.67GHz Double Layer DDR2 (M9969LL/A) Memory
I just bought a used 12" powerbook G4 1.5ghz and I want to add some ram to max it at 1.25Gb. Did anyone try to use ddr400 instead of ddr333 on powerbooks? In theory it will run at 333 like in any pc, but is this flawless in powerbooks? Because ddr333 is expensive nowadays.
View 3 Replies View RelatedI know the powerbook is rather archaic now, but I'm trying to get a new Macbook and don't want to throw my old powerbook away. So.. I have a friend who wants to buy my old G4 Powerbook with 60GB capacity, 512 MB memory, 1.33 GHz cpu speed. It's extremely worn in, meaning, it won't last more than 20 minutes off the power cord, but someone could always replace that. So what would be a fair price to charge someone to take it off my hands?
View 1 Replies View RelatedI bought a powerbook G4. The ram is 512 mb but i want to upgrade that. Is it possible to place two 1gb cards in each slot. That i have a total of 2gb ram? Me was told that the max of the powerbook G4 is 1 gb. Is that true? And when it is true, is it smart to buy a total of 1gb for the powerbook g4? Or doesn't make that any difference?
View 6 Replies View RelatedI believe the hdd is dead so I need to find a replacement but I've no idea which cause there are 93487534231 kinds. Only thing I can really find via googling is that it has to be a 2.5" ATA but there are several different kinds of ATA hdds... so confusing. I was thinking this? [URL]
View 7 Replies View RelatedI have an ibook G4 which connects wirelessly to a netopia router via airport card (under keypad on laptop) Recently came across Evocam and sounds like great software as just what i wanted to keep an eye on my dog whilst i am at work
but the problem i am having is that i can not view this webcam remotely (eg from work) I think i have tried every avenue but no direct help hence my query is being posted here! So what have i done so far:downloaded the 15 day free trial (not going to buy unless it works)got that going ok and interface showed IP and 8080 port clicked on view in browser and hey presto it work - but that is on local "internal" network and wont work over internet - so found out about port forwarding static IP etc so set a static IP which starts 192.168..... and got up router browser and opened/configured port to 8080. - still not working then was told i need my public IP when configuring the IP in the airport network page (sys pref - network - airport) so i did this and again came up fine on evocam interface but then realised I had no longer internet access so had to revert back to the original IP's, sub net mask DSN numbers so i could go online to see what i did wrong which is where i am now.
I understand from other forums and FAQ's that this is suppose to be pretty straight forward but i don't no where i am going wrong so this is my question need help to set up evocam on ibook through wireless and configure airport/ip/router CORRECTLY to make this work.
I have been in contact with evo support team over a number of emails but it all general info i am given and no step by step MAC process (for instance it says go into base station to port map view airport admin untility I go to this but no base station shows up for me to click on or re-configure is it because i just have apple airport card and not base station.I would appreciate it if anyone can help or know the steps i should follow to get this up and streaming my dog while at work
I need help from someone please. I just placed and airport card in my ibook g3. I am running os 10.2.8. I am using a linksys wrt54g router. I turn on the airport. Then I attempt to connect to the name of our network and type in our password. I end up getting a message stating that the password entered in not correct for the selected airport network.
View 5 Replies View RelatedJust replaced the logicboard on a 01' Powerbook G4 Titanium Onyx and I'm getting the no video/beeping sound after the chimes upon power up.
3 beeps
3 lights (1 long + 3 quick flashes)
I don't THINK it's the RAM though, I thought these cards were good before the computer fried. I've swapped the two 256MB cards with each other, also plugged just one RAM card in both slots one at a time--still no turn on and I get the 3 beeps. Unfortunately I don't have any extra 144-pin 133 Mhz SDRAM chips laying around or i'd just test them. It seems unlikely that both RAM cards would be broken, in addition to the logicboard frying, unless the two events happened simultaneously. Previous install had the 667 Mhz upgraded processor and when I took the logic board out it was fried on the bottom with lots of corrosion/leakage on a good 5% of the surface area. Anyways, I replaced it with a 550 Mhz board. Could the beeping be from installing the different processor or is it more likely that I simultaneously fried both RAM chips plus the motherboard?
Do you guys think it would be worth it to spend the $50 to upgrade from 1.5GB ram to 2 GB ram in this machine with Tiger on it?
View 7 Replies View RelatedI am kind of new to the MAC world... I once had the really old ibook with the handle a long time ago..and I never got a new Mac due to some problems I faced!
But now, I want to go back to MAC because many things were developed and I missed using a Mac! So, now I am confused between the Powerbook12 inch or the White Macbook 2Ghz ? I really love the size of the Macbook but I am worried about the intel processor...?
This is ridiculous. After I went out and got a new screwdriver to install my 1GB stick of RAM, which I got off of Newegg, it is now not recognized by my computer. So now I'm running with 256MBs of RAM. Beautiful, thank you Apple.
[URL]
This is what I ordered...Crucial Technology 1GB 200-Pin DDR SO-DIMM DDR 333 (PC 2700) Notebook Memory - OEM
I thoroughly made sure this was the right RAM, and even people with my same type of computer have said it works on their posting thing.. 1.5 GHz PowerBook G4 15". Anyone know how I can get this to work?
My PowerBook 12" 1.5G has 100% CPU usage when playing back the new TV program from iTunes store. And sometimes it even choke.
While I have no virus scanning software, some programs running such as Opera, iTunes, Entourage and have about 20% CPU usage when idle.
Why is it so slow on a PowerBook while you can actually play that video on an iPod? Is it the iPod too powerful or it is just because apple did not optimize enough for older Macs (pushing people to new hardware)?
I have just ordered a new iMac but I am not happy about my PowerBook which is just one year old.
I have an older 15" G4 Powerbook (before the recalled Powerbooks with the RAM slot failures) that has recently been experiencing some speed issues. To my dismay, when I checked my 'About This Mac...' I no longer had 1GB of RAM, only a lowly 512 MB. Tonight I sat down and started swapping and removing my two sticks of RAM and as it turns out, something is up.
With a 512 stick in the lower slot, System Profiler tells me I have 512 MB of RAM and that the upper slot is empty. When I put the other stick in the upper slot (leaving the lower one in), System Profiler now says I have 512 MB of RAM and that the lower slot is empty. Does this look to be a (out of warranty) logic board failure? Is there anything else I can try to do? On a related note, when removing the screws from the RAM panel on the bottom of my PB, one screw fell into my Powerbook, never to be seen again. Is this going to cause any problems down the line?
I think my backlight went out?
I restarted and nothing. Still dim. I can barely, barely see things like if I hit expose, I can see shifting rectangles.
Also, I've been having this issue where the keyboard mostly stopped working -- if I hit kjjh, it'll come up as 3443 or something. It's usually fixed with a restart.
I have it covered by a year of applecare until feb 24, 2007 -- but I haven't registered it yet. Should I register and then call apple or what?
This comes at a REALLY bad time. I have design projects coming up everywhere and of course, despite my $250 external hard drive, i haven't been backing things up because I'm an idiot.
Can I hook it up to a external monitor just to make a backup of my hard drive?
Is it possible to get 2 gigs of RAM into a Powerbook (12") or is it stuck at 1.25 gigs?
View 2 Replies View RelatedMy Friend has a 15" Powerbook (2nd last rev.... 1.67ghz with lo-res screen) and it's been on the fritz lately. It operates completely normal and then it suddenly goes to sleep. When I wake it up it's back to normal just fine. It goes to sleep after about 3 minutes of use.
View 1 Replies View RelatedI recently replaced my 12" PowerBook G4's 60 gig HDD (due to failure) with a 80 gig HDD (TOSHIBA MK8026GAX).
I'm now running out of space and am looking to upgrade to a 100-120 gig HDD (and put my existing TOSHIBA MK8026GAX HDD in an external FireWire caddy).
After research, my two options are: 1 - TOSHIBA MK1234GAX, 2 - TOSHIBA MK1032GAX. Both offer good performance in my price range.
Option 1 is a 120 gig HDD with a 8MB buffer. Option 2 is a 100 gig HDD with a 16 MB buffer.
Obviously I would like as much space as possible with the best performance. Would I see a large drop in performance going from a 16 MB buffer to an 8MB??
All the drives have similar specs (seek times, etc), besides the buffer being smaller on the 120 gig HDD.
Do I spend my money on a 120 gig HDD with a 8MB buffer, or a 100 gig HDD with a 16MB buffer??
Check this thread out for more info [URL]
