PowerPC :: Home Media Hub / Server Setup?
Oct 13, 2008
I would like to set up a home media hub. I have the following devices I would like to be able to access the media:
Powerbook (1.5Ghz)
Mac Mini (Core 2 duo)
PS3 -> HDTV
Old Pentium3 PC to an old Sony tube tv.
I also have an old Pentium4 PC which I was planning to use as the server. I was planning to throw in a 750gb HD instead of running this all off my external (which is what I use now hooked up to the Powerbook). How would I go about doing this? The router is hooked up to the mac mini at the moment.
View 1 Replies
ADVERTISEMENT
Feb 1, 2008
I nabbed an old G4 Quicksilver from the office. 1ghz, dual processor, 1.5gb ram. I'm going to use it as a home file server to serve 1 powerbook and 1 pc laptop over a wireless airport network.
I've got it up and running headless in the basement, plugged into the airport. Out of sight, out of...well I don't have to listen to the thing. It's loud! Anyway, I can control it via VNC on my Powerbook. I use Vine Server and Chicken of the VNC for a viewer.
Here's the plan. Right now it has two 80gb drives in it. One has Tiger on it and one is empty. I just ordered two 500gb Seagate Barracuda drives for it. I believe that it is a late enough model that I don't have to worry about the 128gb limit. I hope that's right.
I also have 1 external 500gb firewire drive. 1 external 250gb drive and 2 external 160gb drives.
View 4 Replies
View Related
Jul 1, 2009
As I'm sure you're aware, I want to setup a server with my 733 MHz DA G4.
Until I can get my hands on a copy of Tiger Server, I'd like to have an iTunes server to centralize my media. I've done some searches and couldn't find anything relevant.
I know I can just copy all the stuff to the G4 and make a shared library, but I'd like to be able to have the media transferrable from the client computers, i.e. putting it on an iPod because the G4 is in the basement which is a hassle to get to and a bit of a ***** shack.
My G4 has the following specs:
733 MHz G4
1 GB RAM
1x 60 GB HDD, 1x 40 GB HDD
Mac OS X 10.4.11, not server
The latest version of iTunes 8
A gigabit ethernet connection
View 15 Replies
View Related
Jul 30, 2009
I am a recent convert to mac and loving it. I do however want to set up a media server - to serve movies to each television via xbox and playstation. I am currently using HP MediaServer. I have had issues with it and want to explore the mac route. If I have a time capsule can i serve movies to xbox etc anywhere in the house? Or would it be better to have a mac mini to do it or even both?
View 6 Replies
View Related
Jun 28, 2012
2003 Mac Pro G5 1.6 4 Gb Ram (my first ever Mac, so bit of a soft spot)Old Airport Extreme (using Airport Utilities 5.6-probably bought same time as G5 2003) Recently purchased refurbished Mac Book Pro 2GHz Intel Core i7 and iMac 2.7 Quad Core Intel i5 What I would like to do is bump up the memory in G5 and use it as a home server for my new macs.Have opened file sharing in G5, am testing on mac book pro, so opened file sharing on this but not sure how Im supposed to access the G5 from MacBP? Tried setting up Airoprt and attaching it via USB2.0 to front of G5, and start G5 whilst holding 'T' to start in harddrive mode but no luck.
Info:MacBook Pro (15-inch Early 2011), Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 22, 2010
I should be receiving my new Unibody Mac Mini Server to replace my current Mac Mini by this Friday but more than likely Monday. I hope to give a detailed review of the Mac Mini Server with pictures. I went with the Mac Mini Server purely for the dual 500gb hard drives which I desperately want. Currently I use my Mac Mini as my Media hub. Its connected to my TV via a DVI to hdmi cable. It has a Turbo.264 HD, 640gb usb external hard drive, and a wireless keyboard logtiech mouse and keyboard attached to it as well as a EyeTV 200 and EyeTV 500 that I use for recording TV shows and digitizing VHS tapes and other media to a digital format (Old analog camcorder tapes, etc). I do a lot of video related tasks with this Mac Mini constantly. My current Mac Mini was originally given to me because a co-worker who upgraded to a better Core 2 Duo Mac Mini, this Mac Mini was originally a Mac Mini Core Solo 1.5ghz. I have had this machine since late 2007. I upgraded the cpu to a 1.66ghz Core Duo immediately when I got it, and maxed the ram out to the whooping 2gb (yeah . . .). Also last year I upgraded the hard drive to a 320gb drive. This Mac Mini has been on running 24/7/265 literally since about December 2007 and its never crashed on my once. I love this Mac Mini its a tank. The only other upgrade I have performed on the Mac Mini was installing Artic Silver thermal paste which made an amazing difference on the Mac Mini.
The reason I'm upgrading is all my media and everything right now currently resides on an external 640gb hard drive that every now and then "disappears" from my Mac Mini, it doesn't even show up in Disk Utility or terminal, and I have to restart the external enclosure. YES I know I could just get a new external hard drive enclosure but I don't want to, I like that hard drive, it works well like 90% of the time. However I now have an HD Video camera and HD content I record via my EyeTV 500 and trying to watch that over my usb connection seems to be pushing the limits. So I'm going to raid the two 500gb to a 1TB drive and use the 640gb drive as a Time Machine drive, or maybe I'll just get a 1TB Time Machine drive . . . not quiet sure yet, for now it will just be the 640gb drive.....
View 24 Replies
View Related
Dec 29, 2008
I am looking to pick up an old Power Mac G4 and use it as a media server. Right now I have a 1.6 AMD Athlon doing this running Windows XP. I will only be using this to stream movies to my tv. The Athlon does perfectly fine, but a few hundred bucks is worth getting windows entirely out of my house.
I want to make sure to pick up one of the Power Macs that can address a drive larger than 128gb, which I believe puts me at about an 800mhz G4.
My question is... Who else is using a G4 as a media server to stream videos over to their tv? If you do have a setup like this how well is it running and please post the specs.
View 8 Replies
View Related
Jan 21, 2009
We've got two laptops in the house (my Powerbook 12 and wife's Macbook) and I've just bought an old 500Mhz AGP Power Mac G4 from eBay, partly to mess around with, partly because it was a great deal, and partly because I want to use it as a media server. What I'd like to do is have:
- iPhoto running on the server - cameras would be plugged in there, photos downloaded etc and photos streamed to the Apple TV
- iTunes running on the server - other machines in the house plus the Apple TV accessing the shared server
- printer sharing running through the server
- Time Machine partitions set up on the server for both my wife and I - set up as double our raw drive space (so 160GB and 320GB)
I've already upped the RAM to 1.25GB and swapped in two 120GB IDE drives. I'm looking to add a Sonnet PCI SATA card and a couple of 1TB Samsung drives, one to host the media and one to host the Time Machine partitions. The media drive would then be backed up weekly to an offboard brick.
So before I go ahead with this grand plan, I thought I'd solicit views on whether it's likely to work, where the bear traps are etc. I guess some of the specific questions I have include:
- is there likely to be a performance issue with the PowerMac in this role?
- can I stream photos to an Apple TV? I know it works with iTunes but thought I'd check on iPhoto
- would Time Machine work OK over a network? Any issue with hosting two TM partitions on the same drive?
The Power Mac is running Tiger, the others are running Leopard.
View 4 Replies
View Related
Feb 13, 2009
In the future, I will be looking for a Media Server, namely a Mac. I want to use it to store all my iMovie projects - mainly iSight or DV format, very little HD, stream them to my Main Mac and also to a couple of Windows PCs (not mine), and maybe preview a smaller version (640*480 or 720*480). I am thinking that Mac OS X 10.3.9 or 10.4.11 will do. Especially as I use iMovie '06 and might use an older version of iTunes. I want to use an older PowerPC PowerMac to do this, can I get away with a G4 running at 400Mhz with 512 MB RAM, or do I need a faster G4/G5?
View 7 Replies
View Related
Jul 16, 2006
I am thinking of getting a mac mini for a home theater. I want to set it up in the home theater to hold my dvd's. Is there any way to get front row to view video_ts folders? I know there is another program that will, but I really like front row. Also anyone out there that has done the same thing that can give me some pointers? I want surround sound (optical out) and it would be connected to a projector.
View 5 Replies
View Related
Jul 22, 2010
I can use an Atom 330 Dual Core based machine as my home server?. I use it to live encode videos through AirVideo to stream to my iPad.. but the encoding is choppy and laggy. I have the chance to buy a 1.8 dual G5 PowerMac - would this be more powerful and encode video faster than the atom??
View 1 Replies
View Related
Apr 3, 2012
currently using mac mini server for sharing files and folders. Would like to setup VPN to get access to files remotely.
-Model identifier: Macmini 3.1
-Mac OS X Server version 10.6.8
I am not sure if this version supports VPN.
Info:
Mac mini
View 1 Replies
View Related
Jan 17, 2009
If you can stream the Mac as a media server on your PS3 just like how it does on Windows for Windows Media Player....
View 11 Replies
View Related
Apr 9, 2009
I drive a big truck and like having my whole music collection at my fingertips while driving. In the past what I've done it trap my Macbook Pro to the passenger seat and use my remote and FrontRow to change tracks. This worked pretty well except that the rough roads and rough ride of the truck kills regular hard drives fairly quickly. Replacing the drives every 6 months gets old. I need at least 1TB of storage for my iTunes media, I do not want to split it up to different drives. The drives used need to be SSD's to handle the 130k+ miles of abuse a year.
The bumps don't seem to effect the computers main drive, either because of the motion sensor or iTunes being able to run in memory and not need the drive to spin up. I was thinking of using a Drobo with 2.5" drive adapters. I'm not concerned about speed with the drives, just reliability. None of these drives will ever be used as a system drive, just media storage and playback. What drives would you guys recommend? Would this be possible for under $1500?
View 8 Replies
View Related
Nov 13, 2009
Essentially
1Tb Time capsule - latest model (TC)
1Tb Western Digital My Book - World Edition (WD)
Ethernet - all Gigabit using Cat6 cables
Now I think initially TV macbook pro set up will be wired for speed, then set up for wifi back up.
View 1 Replies
View Related
Jul 15, 2008
I want to setup a mail server from a Mac OS X server machine.
I used the standard configuration as the wizard is going to setup all the services automatically.
I have an email of the kind server.com
After the finish of the configuration all the system was working perfectly, except one thing. I could not browse to any .com address I could not resolve the apple.com address. This is actually a DNS server issue and as my DNS server is hosted to my ISP, I closed the DNS service from the Server admin app. Now I could browse to .com addresses but all the settings to the client computers need to be done manually. Meaning not from the Directory utility. The problem is that the address of the server was changed from server.com to server.local so all the settings now are server.local, including my email address that changed from user@server.com to user@server.local that cannot be replayed from the recipient
My Question is can I change the default configuration settings that the directory utility sets?? or do any other configuration to solve the issue.
Also in the webmail when I send an email the email of the sender is the username continued by the ISP's internal static IP host which is different to my server.com. I found a solution to change the email from the personal information tag of the options button. Can I also pre configure these settings to be ready as a new user is created??
View 1 Replies
View Related
Feb 11, 2012
I'd like to setup a network account on Lion Server and allow that account to VPN in to my server. But I want this account to have limited access to my LAN, similar to how the stovepiped "Guest Network" works with Airport Extremes. I don't see any way to assign specific network accounts specific IP ranges outside the normal, say, 10.0.1/24. Is there even any way to assign a specific account something in the range,say, 10.0.2/24? Any way to further limit network access for Lion Server VPN sessions?
Info:
Mac mini, Mac OS X (10.7.3), Lion Server, 8 GB
View 2 Replies
View Related
Apr 24, 2012
I've googled and searched, I can't see what I'm missing, so I am turning to the community for help, because I simply don't get this. I own 2 domain names. I'd like to use the build in Mail Server application into SL Server, so if your suggestion is using another mail server, please don't post that.Â
Let's say my domain's are domain1.com and domain2.com I've looked at the Mail Server Admin user guide, and I've followed a couple of wizzards, and... all in all, I am getting no where. Let's also say my email client is my iPhone.Â
Ok, so domain1.com currently has no email with my current provider, and domain2.com currently has email from my current provider, it's my desire to eventually switch this, but experimenting on domain1.com will do no harm, so I am experimenting on this. Both domains give me the ability to point to an mx address.Â
Here's what I've done. I've got my user created in Workgroup Administrator, and I am confiuguring my LDAP3v, and I am authenticated enough to create and delete users.Â
***I Should note that DNS is currently disabled, I gathered from all my reading that I don't need the DNS enabled because I manually put in the MX record to mail.domain1.com and domain1.com is correctly identified. The server is also the webserver, and all the web server functions are working as expected! I don't know if not having the DNS enabled is holding me back or not ***Â
1st, I enabled the mail service in the Server Admin. My domain name is ServerName.local and my host name is mail.domain1.com (I created an a entry in my dns settings for that). Enable SMTP is set, IMAP and POP are enabled as well.
I don't intend on setting a relay, because I want this server to do send email out. I do have some cases where I send a mass email out, not for spam but for Christmas card purposes, and I think this is a good free way to not have to limit myself to batches of 50 or so.
I have my created SSL certificate, and havce only the Kerberos and CRAM-MD5 settings set in the security.
In my hosting section, I have enabled Virtual hosting, and listed my domain1.com and domain2.com below.
Now in workgroup manager, I've connected to my LDAP3v database and created a test user, and a test group. In the server admin, I added the test group to the list of authenticated mail users. I made my test user a member of the test group, and made that his default group. I enabled the mail service, and set the mail server which is ServerName.local, and enabled POP and IMAP.Â
That's it. I've done nothing in terminal, just that. I was getting a user unable to authenticate error, it was able to download the certificate though. Then I realzed I had an MXE defined in my settings for my DNS domain manager. So I changed to an MX, to mail.domain1.com and then I created mail.domain1.com pointing to the same IP address as domain1.com, and unfortunately the DNS records haven't updated yet, because I initially didn't create the mail.domain1.com entry, and now it's saying the server isn't responding, so I am anxiously awaiting an update from the DNS in the world to see if the issue has now cleared up.Â
Info:
Mac mini Server (Mid 2010), Mac OS X (10.6.8)
View 5 Replies
View Related
Mar 19, 2009
I have a Mac pro that I use at home. I want to set it up as a server. Like a hosting server that I can log on to anywhere in the world, not just on my local network. I want to set it up similar to a hosting account through someone like godaddy. Where I can log in using FTP or something else. Do I need to install Mac OS X server? I've tried searching but I keep find local home servers. Anyone got any ideas? I'm guessing the first thing I need is a static IP, where do I get that?
View 4 Replies
View Related
Jun 22, 2010
Here's my idea on a setup when I move into my garage. Xbox 360 connected to iMac 27" with a Kanex XD HDMI to Mini DisplayPort adaptor. A FreeView box also connected via HDMI though the Kanex XD adaptor using a HDMI switch. Or instead of the FreeView box I might get an EyeTV TV Tuner so I can use the new app to watch live tv on my iPhone.
Here's my other idea...
Mac Mini connected to my 42" Samsung HD monitor via HDMI
Xbox 360 also connected to the monitor with HDMI
A FreeView box also connected via HDMI to the monitor with a HDMI switch to change between the three.
I suppose it depends on screen size at the end of the day.
View 1 Replies
View Related
Apr 4, 2010
On Mac OS X Leopard 10.5.8 (Intel) and on a FileVault protected user my home directory is appearing as a removabile drive on my desktop and everywhere else. I had to reconfigure iTunes, Firefox and Camino both fail to start and not to mention other applications not being able to find my/their stuff. This started happening after I updated via the Software Update app a day or two ago.
View 1 Replies
View Related
Sep 17, 2009
Any idea how iTunes 9 Home Sharing would handle media on a Network Attached Storage Drive? Suppose I change the location of my media to the NAS in iTunes settings and then set up Home Sharing. Then I add a song to one machine the song gets added to the library file the .mp3 gets copied to the NAS. If Home Sharing is on and they all refer to the same location for the media files, how would iTunes on the other machines handle that? Would it just add it to the library files on the other machines and see that .mp3 file is already in the proper location on the NAS drive?
View 3 Replies
View Related
Jan 10, 2010
I have an Intel iMac and Macbook connecting just fine to my netgear router. Airport signals are great throughout the house. A friend dropped off an old PowerMac G4 (Quicksilver) which I placed down the hall in my daughter's room.
It didn't have an airport card, so I installed an aftermarket one. The airport setup utility continually kicks out my login password to my home network saying it's incorrect (am sure it's right) and there is no signal indication in the finder.
iMac is running Leopard 10.5.x
Macbook is 10.4.x
G4 is 10.2
View 5 Replies
View Related
Oct 24, 2009
My home network setup is pretty weird and I am having problems connecting between my G4 with Leopard and my MBP with SL. Basically I have a static ip with a zyntex or something ADSL modem, then I have a switch and after the switch i got a 10Mbps Brack Firewall router and today I bought an Airport Express to get internet at places. I dont want to lay down cables. So anyway I noticed once I hooked up I can see my G4 but I cant connect to it. If I use a cable tho it work. Btw the airport is connected to the switch so is the G4, all the PCs are connected thru the brack router.
View 6 Replies
View Related
Mar 16, 2012
I changed my network name and now it won't connect to the internet.How do I put in the new password (that goes with the new name)?
Info:
Aluminum MacBook, Mac OS X (10.5.7)
View 1 Replies
View Related
Nov 6, 2007
I'm traveling for the next 3 months overseas and I wanted to setup some sort of VPN that would allow me to access my home macs over the internet from my Macbook Pro. I've searched for some setup instructions over the net and can't find anything. If someone can help me out with step by step instructions I'd appreciate it. I have and Airport Extreme with a couple of MacPros and external hard drives attached. Having access to them while away will keep me in touch with things I may need at home while away. I'm running Leopard 10.5 on all machines.
View 3 Replies
View Related
Jan 27, 2009
I'm setting up my MacPro and received suggestions to have one drive for boot and applications only. Then have a separate drive for data.
I know I can set up a separate USER account and point to another HD and leave the Admin untouched, except for installing new applications.
View 4 Replies
View Related
Nov 14, 2009
What is the least I need to get a really great setup using a Mac Mini as my main entertainment source. I am planning to drop all cable/satellite and just watch shows on Hulu and stuff.
Specific questions:
1. Do I need more than 2GB of RAM to run the video without jumping?
2. Can I buy an older, used Mini or should I just buy a new one?
3. What hardware do I need to successfully run this setup?
4. Should I buy an external HD or upgrade the internal one?
5. What software do I need to successfully run this setup?
Here's the hardware that I either have already or plan to get:
1. LG42LH40
2. Mac Mini
3. HDMI cables and adapters
4. Optical Audio cable
5. Wireless mouse/keyboard
What is this Boxee and EyeTV all about?
View 4 Replies
View Related
Nov 18, 2009
I use the Apple Airport Extreme Base Station Dual Band as my main router. I use a new Apple Airport Express to extend the range of my AEBS and allow connectivity via Ethernet only. Problem: We want to be able to setup a NAS that will be accessable outside of our home network via the internet. We are looking at using a free software such as Free NAS. We are not able to figure out how to forward a port on the Airport Extreme to allow an FTP. Is this being complicated by the additional airport express? do we also have to change settings inside that router to allow this. We have scoured the internet for specific instructions on how to do this, but cannot get it resolved.
View 3 Replies
View Related
Mar 4, 2010
I want to set up a home network but I'm utterly clueless in networking so I turn to you guys for help I believe I should have almost all the components to set one up but I need some pointers.
I'm the only person in the house who uses a Mac, also have two Windows 7 desktops (one connected via wifi and the other ethernet). I also have a printer and a 500GB hard drive (the 3.5" IDE ones) that I want to hook up to the network.
I guess my end goal is to have all three machines in a "LAN" and play nicely together (file sharing and stuff), print documents through the network and have a "central backup".
Currently I have a Linksys wireless router with SpeedBooster (model WRT54GS), it doesn't have any USB i/o so I guess I will need a router with USB? If I don't get a router with USB then will I be able to print from my MacBook if the printer is plugged to another desktop? Perhaps a TimeCapsule?
View 1 Replies
View Related
