I when I transfered my latest time machine back-up to a new computer I noticed that in the new computer in Users/me/applications there is nothing, all of my appliclations are in Mac HD > applications.
Info:
Mac OS X (10.7.4)
I've backup my Macbook Air Using time machine before reformat it to have window partition.However, after installing OS Lion 10.7.4, how do I restore back all my application and data on my last backup from time machine?
Info:MacBook Air
I maybe buying a new iMac soon and I want to know will my leopard time machine back up data be transferrable over to snow leopard? I know you can't exactly do a restore because they are different versions but I want to make sure I can place back majority of the data I had on my leopard iMac.
View 1 Replies View RelatedHaving just backed up to my external drive through time machine I re installed OS X Now I like the entire last Time machine back on my computer as the disk had to be erased for the install Is there a easy way to do this as opposed to file by file?
Info:
Mac Book Pro, Mac OS X (10.6.1)
I cannot enter the time machine when I press the time machine icon. I press and nothing happens, so I'm not sure even if it is backing up at this point. When i go to my Tme Capsule it has the folder there for back-ups and the most recent, but no access from the icon.
View 1 Replies View RelatedI'm getting a new macbook. Currently I use time machine as a backup tool and was wondering if I should use it to transfer all my data to the new mac. One benefit of a new harddrive is the fresh install without all the junk that has built up over the years right? So wouldn't time machine just be transferring all the junk and stuff I want to the new mac? or is time machine smarter than this.
View 10 Replies View RelatedI have been using Time Machine for quite sometime, and backing up to a WD Passport. I need to move to another HD, but was wondering if it is possible to move the backups on the original external HD to the new one, so that I don't have to start all over. I have a strong suspicion that this is not possible, considering the dearth of information on the topic.
View 1 Replies View RelatedI just wanted to share my experience and hopefully answer any questions people may have about doing this:
I purchased a 1.5TB HDD and external enclosure to increase the backup size of my 500GB TC, and not wanting to start my backups from scratch I tried copying the sparsebundles to the new drive. To my surprise, I was able to switch my TM source disk to the new drive and the backups picked up where they left off! It proceeded to do an incremental backup, and after it was done I went into Time Machine and could see all the backups from the beginning! Now I can use my TC's internal as storage and keep the external for backups. Hope this helps anyone looking to increase the size of their backups without starting fresh...
so I have a 1.33GHz iBook G4 with 1.5GB of RAM and a 40GB hard drive.
Last night I reinstalled the OS, which is to say I reinstalled the Leopard upgrade disk. All went well.
Then I pulled out my time machine back up, opened Migration Assistant and started moving everything over, and that's where it all went horribly wrong.
The first time I did this it stayed at 4 minutes remaining for about an hour and a half. I gave up and hit quit, but something'd been copied across because my hard drive only had about 9GB left, but I can't see any of the stuff that's taking up all this space.
So, I whip out the Leopard disk again and start all over. I figure maybe Migration Assistant's just one of those things that needs to sit for ages. This time it seemed to freeze at 38 minutes remaining but I went to bed and left it.
I recently bought a new MacBook Pro, and wanted to transfer all the data from my old MacBook Pro, but I get the message saying I need to update time machine on my old one in order to use time machine. However, my old one is too old to update. So I decided to use the cable to transfer, because I heard I can do it that way even though it could take time.
View 2 Replies View RelatedI have a time machine backup on an old firewire drive. My new laptop does not have a firewire port so I was wondering if I can just copy the time machine files onto a new thunderbolt drive and use it to migrate data to my new computer.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
1) I have a full external hard drive and would like to transfer all my time machine back-ups to a new larger one. How do I do this?
2) And when I'm ready to transfer all time machine data to my new iMac using external hard drive can I choose all dates so I'm including all pictures videos etc?
I had severe account troubles on Snow Leopard, and today, the Mac partition became corrupt and unreadable. I have a very recent Time Machine backup of that user account, but I don't want to transfer the account itself. Can I just transfer applications, documents, and settings, and not the account itself? And how do I do a clean install of Mac Snow Leopard onto a hard drive with a previous installation of the OS?
View 2 Replies View RelatedI am doing an initial back up for Time Machine. I've got 56Gigs worth of data to back up from my 2Ghz Uni Body MacBook (with 4gig of Ram & running OS 10.5.7). I have a newly purchased Airport Extreme base station to which is connected to a Western Digital 1 Gig External HD. I am getting a transfer rate of about 1 gig per hour. Is it really this slow? I am using a 5Ghz network to reduce interference and they are very close to each other.
I tried connecting the WD drive to the MB. After I switched off Virus Barrier V5 and stopped Spotlight indexing it was quite fast. However there didn't seem a way of tricking this backup to think it was done via Airport Extreme. How could this be done?
It looks like my MB is going to have to be left on and stay at home for the next couple of days!
I just got my 500 Gb HD in the mail and want to swap my hard drives while keeping all of my data. Does time machine work like this? Can i back my 120Gb HD up and then install my 500Gb HD and then put my files back on?
Info:
Mac OS X (10.6.8)
In order to use Lion’s encrypted (Core Storage) external drive feature, I needed to reformat an external 1TB drive with Apple Partition Map, as that works only with GPT. The only partition was HFS+J formatted and was used as Time Machine Backup, which I wanted to preserve.
Act I:
I connected the drive to another iMac running 10.6 which happened to have enough space on the internal HD. I read this article http://support.apple.com/kb/HT5096 , which describes how to copy the BackupDB just by drag and drop. In hindsight, that was a bad idea, I should have created a disk image like suggested elsewhere, but if Apple itself suggests it, it can’t be so bad right?
So I just dragged the whole BackupDB to random folder on the iMac (after enabling ownership), and apparently it copied correctly the dir-hardlinks, as the resulting folder had the same size.
It seems that the Finder activates a special dir-hardlink aware copying mode when one does this. This is also confirmed by the fact that the Finder will refuse to copy the BackupDB together with other files, you have to drag and drop the BackupDB only.
Act II:
I reformatted the external drive as HFS+J with GPT and activated ownership.. But now, when I try to copy the BackupDB back, it continues to count indefinitely the number of files to copy! I speculate that the special dir-hardlink aware mode is not activated, but what can I do? How can I trigger it? Is there some hidden command line tool which handles this?
The lesson I’m drawing from this is: use the method described in the article only if you copy the backupDB from your old to your new drive.
Info:
Mac OS X (10.6.8)
Computer: Mac Mini, 2009 or so, 160 GB HD (about 50 available), Yosemite.
Issue: Set up a separate user and trying to import information from a Mac Book that is having issues. Mac Book was backed up to an external HD via Time Machine
Question: Is it possible to use time machine to transfer some of the information (photos, music, files) from the external hard drive to the Mac Mini? Is it possible to extract the information from the hard drive by connecting it to the Mac Mini without using Time Machine?
I have my data saved on an external hard drive (OS 10.7) as I sold my previous Mac and am thinking about buying a power pc iMac using Leopard - does anyone know whether this will be able to open and transfer my data to the older Mac?
View 3 Replies View RelatedYesterday I used Migration Assistant to recover the contents of a failed MacBook Pro (Snow Leopard) from a Time Machine backup to a new MacBook Air (10.7.4). Using the same external disk for backups, I now have a folder for both the old and new machines in
/Volumes/time_machine/Backups.backupdb/
The instructions here
[URL]
explain how to reconnect time machine to the old machine's backups. Once I've done this and checked that I can access the old backups, can I simply delete the new machine folder to save space?
Info:
MacBook Air, Mac OS X (10.7.4)
I just switched from hdd to ssd and i want to resume my Timechine backups, but it says that I have incorrect date and time set in my mac.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a MacBook Air and a Time Capsule - both from november 2011.Using Time Machine is givning me som problems.It works fine for some days, an is backing up as planned.But at least 5 times since I got the Time Capsule, Time Machine is asking to make a full Backup, and when I look in Time Machine, it says that there is no "old backup". It has been runing since november 2011.When I start a new backup, as it ask for, it takes at least 24 hours to finish - some times even longer.Is this normal? If not, what do I do?
Info:
Time Machine, Mac OS X (10.7.3)
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation home
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
I have an iMac running the latest version of Lion (10.7.4) and which I have upgraded to a one terabyte hard drive and full memory capability. I back up to a My Book 2 terabyte external hard drive using Time Machine. My iMac is often very sticky, though I've done most of the diagnostics I know of and preferences etc. are seemingly all OK and fcuk -fs gives a positive result! The Mac is often hard to wake from sleep and in particular seems to spend a lot of time backing up very-very slowly, with the result that it frustratingly seems to be backing up most of the time with the consequent effects on using other programs. Also the whole thing seems to grind to a halt after a hard days work with quite a few applications open. I'm wondering what can be causing this and what I can do to overcome this very frustrating and debilitating problem?
Info:
iMac, Mac OS X (10.6.2)
I have an older mac with snow leopard and I just bought a new AIR with Lion. Is there a way to transfer everything including programs that are work related on to the new machine? Can I do it with time machine?
Info:
MacBook
I have updated to 10.7.4, and now Time Machine does not work on my Time Capsule. I have erased all backups using the Airport Utility. When I try to run Time Machine, the disk is mounted, files are calculated, backup starts, then stops, and no backup is done. Also, no error messages.
View 2 Replies View Relatedhave a MacBook Pro 15" 10.7.4 which isn't working with TimeMachine any more When starting a backup, Time Machine tells me to backup 112kB (for example) .... an running and running, and after a short time "2kB from 112kB" ... and runnig and running and then "5kb from 112kB" and so on. The progress status is updating very slowly.
The weired thing is: the ".inProgress" file on the external hard drive (tried FireWire and USB connection) is growing to 85GB (the total used space on the hard drive) while Time machine status tells me it has saved some kB. And every backup is running in that way. Instead of backing up only the difference, all files where backuped - although the status is displaying a few 100kB - which should be the right size to backup.
- Repaired permissions > Same error
- Tried installing combo update > Same error
- Tried another external hard drive > Same error
- Tried cloning system to different hd > Same error
- excluded the Users home folder > Same error
- Interal hard drive speed > Over 70MB/s > OK
- External hard drive speed > Over 70 MB/s > OK
So had to be something with the System itself.
I am a new mac user (total convert--am on my second iMac in a month and am about to buy a macbook), and am having trouble with my itunes service. My first 24" iMac developed a clicking HDD, so I was lucky enough to be able to bring it back to the shop for a replacement iMac. I made a time machine backup of the first Mac and copied directly to the second one (which was flawless....how come I haven't been using macs prior to now? I've lost dozens of backups on PC). The only issue I've had is with iTunes--I keep getting an error that the iTunes library is newer than the version of iTunes on the computer. Is there anyway to fix this without losing my entire library of songs? I did make up a physical copy of the iTunes folder on my first Mac, just in case, so I assume that I could delete iTunes and reinstall a fresh copy, update it, and then copy the iTunes folder over to the new version. But this is a Windows approach to the issue and there is probably a simpler way of fixing this. Alternately, I could do the same but sync my iPod and copy everything to my library that way.
View 5 Replies View RelatedI'm an idiot, pleased to meet you.I had 2 external drives connected to my Macbook Pro, both had time machine back ups on...I meant to delete one of these but deleted the wrong one, and dragged it into Trash. On realising my mistake I tried to drag it back out of Trash, as you would normally but after "preparing to copy" for four hours it told me the drive was full...It's a 500gb drive, and the Time Machine back up is the only thing on it, so presumably it's just trying to copy itself when the back up is still present on the drive, albeit in the Trash.
View 1 Replies View RelatedJust received my new MacBook Pro yesterday (13" lower end model) and let it sit overnight transferring files from a Time Machine backup of my old iMac. Brought the machine to work today on a full charge and discovered I had less than two hours of battery time remaining. Fired up Activity Monitor and discovered the dock was using 95-100% of the CPU. Did lots of research online but couldn't come up with any tricks to solve this dilemma. I did have an Admin acount on my iMac, however. Logged into that, and voila: the dock issue went away.
Question is: what should I do next? I had a lot of older software on my iMac that got moved over in the transfer and I suspect something is causing the issue. What is the best way to "start over", as it were? I have this functioning Admin account, so should I just create a new user account from here and re-import all of my files (except for the software, which I can reinstall on a "as needed" basis).
My old machine gave me no trouble so it's frustrating to have this beautiful new laptop experiencing problems on it's very first day of life!
Info:
MacBook
Pro, Mac OS X (10.7.4)
So I already placed my order for my new iMAC. I have a MacBook (2006) with iLife 08.
My question is: When I get to transfer my MacBook info into my new iMAC, will i encounter any problems with my iLife files being that I have iLife 08, and the new iMac's come with iLife 09? The Time Machine transfer won't bring the new iMac software back to 08 will it?
Just want to be sure before I set this up.
