I just upgraded to Lion, and Time Machine seems to contantly backing up. Is there a way to choose to back up only once per day or every few days?
Info:
MacBook
Pro, Mac OS X (10.7.3)
I just recovered from a hard drive failure via Super Duper. Went to do a post crash Time Machine and it is taking HOURS. What gives.
View 2 Replies View RelatedI've had my MacBook Pro for a little less than a year and it has 4gb of ram but i have never seem my computer have even 2gb of ram available. With Safari up and itunes it almost consumes all the ram, is this normal? I don't believe it should be. Do i have too much crap on my computer?
Info:
MacBook Pro, Mac OS X (10.7)
I have one of the black macbooks with c2d, a GMA950 graphics card, and 2 gig of ram. When I run Windows XP in Fusion, the fan runs almost constantly - even without any windows applications running (antivirus is running). This bothers me.
It's getting time for me to consider a new laptop. Does anyone have any experience with the GeForce 9400M or 9600GT video card laptops? I'm wondering if my experience will be different with either video card.
From a cold startup my Macbook pro 13 fan runs continuously at high speed.
View 1 Replies View RelatedHave noticed this recently, mainly since the 10.10.1 update.
It's a 2.66 Intel C2D with 8 gigs of OWC RAM and a 240GB Crucial SSD
I work mainly from home and have it at my desk. It's hooked up to an Apple Cinema HD Display 23"
All updates done to software, permissions repaired, PRAM flashed, etc
Turned down the transparency, turned off some items in spotlight search, still no change
Info:
MacBook Pro (13-inch Mid 2010), OS X Yosemite (10.10.1)
Since downloading Lion osx recently, my fan runs all the time, even if I have few programs running. This didn't happen before with snow leopard.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.4)
Black MacBook fan runs constantly. I found a thread here that looks helpful: [URL]. Following suggestions there I looked in Terminal at the top cpu processes for a rogue process that's overloading the cpu and keeping the fan running. What I see is a "COMMAND" called "DriverSPd" with a PID of 157* that often runs the cpu past 90%. Do you know what Driver SPd is? Can I kill it (without killing my MacBook?)
View 1 Replies View RelatedI've got an early 2008 Macbook Pro and, recently, I've noticed that the fan (fans?) begins running from the moment the computer is powered-up. iStat tells me that both fans are running at about 2000 rpms, though I only hear a slight whoosing noise from the left side. I don't remember the fan running constantly, and I have noticed that my battery life seems worse than normal recently. Is this normal, and something I just haven't noticed until recently?
View 6 Replies View RelatedI cannot enter the time machine when I press the time machine icon. I press and nothing happens, so I'm not sure even if it is backing up at this point. When i go to my Tme Capsule it has the folder there for back-ups and the most recent, but no access from the icon.
View 1 Replies View RelatedAs the title says, my Macbook Air running freaking amazingly hot ever since the latest Mac Update. Any ideas, I can't find anything in the Activity monitor that could be causing my Macbook to be running so hot.
View 5 Replies View RelatedI have my data saved on an external hard drive (OS 10.7) as I sold my previous Mac and am thinking about buying a power pc iMac using Leopard - does anyone know whether this will be able to open and transfer my data to the older Mac?
View 3 Replies View RelatedYesterday I used Migration Assistant to recover the contents of a failed MacBook Pro (Snow Leopard) from a Time Machine backup to a new MacBook Air (10.7.4). Using the same external disk for backups, I now have a folder for both the old and new machines in
/Volumes/time_machine/Backups.backupdb/
The instructions here
[URL]
explain how to reconnect time machine to the old machine's backups. Once I've done this and checked that I can access the old backups, can I simply delete the new machine folder to save space?
Info:
MacBook Air, Mac OS X (10.7.4)
I just switched from hdd to ssd and i want to resume my Timechine backups, but it says that I have incorrect date and time set in my mac.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a MacBook Air and a Time Capsule - both from november 2011.Using Time Machine is givning me som problems.It works fine for some days, an is backing up as planned.But at least 5 times since I got the Time Capsule, Time Machine is asking to make a full Backup, and when I look in Time Machine, it says that there is no "old backup". It has been runing since november 2011.When I start a new backup, as it ask for, it takes at least 24 hours to finish - some times even longer.Is this normal? If not, what do I do?
Info:
Time Machine, Mac OS X (10.7.3)
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation home
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
I have an iMac running the latest version of Lion (10.7.4) and which I have upgraded to a one terabyte hard drive and full memory capability. I back up to a My Book 2 terabyte external hard drive using Time Machine. My iMac is often very sticky, though I've done most of the diagnostics I know of and preferences etc. are seemingly all OK and fcuk -fs gives a positive result! The Mac is often hard to wake from sleep and in particular seems to spend a lot of time backing up very-very slowly, with the result that it frustratingly seems to be backing up most of the time with the consequent effects on using other programs. Also the whole thing seems to grind to a halt after a hard days work with quite a few applications open. I'm wondering what can be causing this and what I can do to overcome this very frustrating and debilitating problem?
Info:
iMac, Mac OS X (10.6.2)
I've backup my Macbook Air Using time machine before reformat it to have window partition.However, after installing OS Lion 10.7.4, how do I restore back all my application and data on my last backup from time machine?
Info:MacBook Air
I'm expecting a new mac mini (with super drive) from the FedEx guy any hour now with snow leopard on it. I want it to run time machine backups for my macbook pro that runs leopard. Is that an issue? The two versions of OSX?By the way of more information, I'm also going to use the mini as a centralized music and video source -- it'll hook up to my stereo system and my projector.
View 2 Replies View RelatedThought the house power had gone off because when I returned home, my Mac was off. Rebooted checked email, and went to get breakfast. Came back fan running very fast, and machine is locked and no video. Turned off by holding in power button. Same thing happens when I left again. I have now been on the machine for over an hour and no problems. What is causing this?
Dual 2.3 PowerPC G5
I have updated to 10.7.4, and now Time Machine does not work on my Time Capsule. I have erased all backups using the Airport Utility. When I try to run Time Machine, the disk is mounted, files are calculated, backup starts, then stops, and no backup is done. Also, no error messages.
View 2 Replies View Relatedhave a MacBook Pro 15" 10.7.4 which isn't working with TimeMachine any more When starting a backup, Time Machine tells me to backup 112kB (for example) .... an running and running, and after a short time "2kB from 112kB" ... and runnig and running and then "5kb from 112kB" and so on. The progress status is updating very slowly.
The weired thing is: the ".inProgress" file on the external hard drive (tried FireWire and USB connection) is growing to 85GB (the total used space on the hard drive) while Time machine status tells me it has saved some kB. And every backup is running in that way. Instead of backing up only the difference, all files where backuped - although the status is displaying a few 100kB - which should be the right size to backup.
- Repaired permissions > Same error
- Tried installing combo update > Same error
- Tried another external hard drive > Same error
- Tried cloning system to different hd > Same error
- excluded the Users home folder > Same error
- Interal hard drive speed > Over 70MB/s > OK
- External hard drive speed > Over 70 MB/s > OK
So had to be something with the System itself.
My fan seems to run all the time and I don't know why. I have a white macbook.
Info:
MacBook, Mac OS X (10.5.8)
I have been running Time Machine on my iMac since I got it. I installed server and now I notice that the server app has Time Machine as well but its turned off. My oringinal Time Machine in system preferences seems to be running like it always has. What is the difference between the two?
View 2 Replies View RelatedI am running a Intel Imac 2008 clean install SL then Lion upgrade, followed by Lion Server install.I have multiple home macs, and intnded the server as a way to monitor and restrict kids internet use.In short, it has changes/screwed up multiple programs, and complicated home sharing issues considerably. Mail on the server machine has permission problems (cannot send mail, unable to sign), Spotlight in mail is non-functioning, finder spotlight searches are inconsistent, etc.I want to revert to plain old Lion.
I have done disk utility/verify disk and verified/repaired permissions, and have 'fiddled' (i'm not an expert) in the keychain/certificates areas, but I think the best solution is a clean install of Lion. When I backup to TIme Machine, is there a way to pull a 'Lion' version of my disk image back, and just not upgrade to Server? I understand I can disable Server and turn off applications in Server, but it doesn't fix my buggy machine. My options are to back up my 250GB of music, 100GB of photos, 100GB of movies, etc on to external drives, and clean install and then reimport everything, but even that will probably mean I cant reinstall my single user licesnse of MS office, VMware fusion, etc that I didn't buy on the App store.
Info:
iMac, Mac OS X (10.7.3)
Does anyone know where to find that video that runs the first time you turn on a Mac? The one with "Welcome" in 20 difference languages? I recall that I found the video in the Library folder sometime ago (I forgot where) but it had no sound. If someone could tell me where to find the video and the audio of this,
View 5 Replies View RelatedI recently purchased an X800 and installed in my G5 1.8DP (OS X 10.4.9) with the intention of having something to drive my shiney new 30" Cinema display. All booted fine and, in glorious wide-o-vision, I spent the next 30 mins playing with all of this extra screen real-estate. At that point, I started to notice that things were not as quiet as I'd initially anticipated.
In fact, the amount of fan noise was so high that I'm not going to be able to use the new card as the machine is part of a project recording studio installation. Doh! So, a quick trawl of the ATI web site lead me to the ROM updates claiming to address fan speed control.
Update to the most recent version of the ROM and no change. Similarly, I've installed the most recent version of teh ATI control panel.
Odd as other people seem to be saying that they're not experiencing the same problem. And strangely, the GFX card fan runs at a low "normal" speed in Safe Boot mode whilst installing the ROM updates.
Information:
G5 1.8DP + Macbook Pro
I was trying to set up my Time Machine to an external hard drive. I didn't continue because it asked to "initialize" the hard drive which I had a lot of important things on.
I have another external hard drive I'd like to use but, my Time Machine has this error code of -43. What is this and how can I use my Time Machine on another external hard drive?
can't open the program time machine located in the folder /applications/time machine anymore, message says program ain't working for unknown reaason, but I still can open time machine in the menu bar. any clues what the trouble might be? and/or is there any way to reinstall time machine only on os x 10.7.3?
btw., on the system backup hd which is a mirror of the imac system, the programm still works
Info:
iMac, Mac OS X (10.7.3)
I have 4.5 tb of photos. How can I use time machine to back it up?
View 10 Replies View Related