Odd freezing occurs when trying to log off. It requires me to hold down the power button and basically restart the machine. Is this a sign of a virus infection, or have I done something else I don't know about?
Info:
iMac 3.2Ghz i3, 21", Mac OS X (10.6.5)
I have a mid-2008 (June) MBP 15". Just upgraded to SL last night. I am having a serious issue with time machine. I've been using it with the same external HD since I bought my mac last year. No issues up until I installed SL last night. This morning (my first backup since upgrading), time machine started backing up (~ 9Gb) but just stops at around 300Mb. The clock keeps spinning, but there is no change in the amount backed up.
I'm reading that other folks are having this issue as well. Has anyone figured something out? I've run disk repair (nothing found), restarted my mac & external HD (several times each), and cancelled and restarted the time machine backup (several times). Each time it freezes at a different amount (i.e. 34Mb, 284.2Mb, etc...).
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files.
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
Did an upgrade install from 10.5.8 to SL (MacPro early 2008, 8800 Nvidia). Didn't use the Mac for a couple of hours - when I came back I had a black screen and no way of reviving Mac (only forced shutdown via power button). this happened twice. Did never have a problem previously.
View 7 Replies View RelatedI bought a used MaxBook (2,0 GHz Intel Core Duo , 2 GB RAM, 80GB HDD) and try to install 10.6 Snow Leopard (Family License).The MacBook HD doesn't have any data on it, as the pre-owner completely cleaned the HDD. I put the SnowLeopard CD in the CD-Drive and press the C-Button during booting and start the install process according to the dialog that shows up.The installation starts and shows me in the beginning it will take 34 minutes to install. The process continues till the countdown shows 28 minutes’ and then the installation process freezes. I only here some repeating noise from the CD-Drive but nothing happens. I tried this process now several times, I was waiting for hours that the install may continue, but no success so far.... Does somebody have any idea what I could do install 10.6 successfully? I don't think it's a license issue, but I want to add that I also own a MacMini and with the same install CD was successfully installing 10.6 on the MacMini.
Info:MacBook (13-inch), Mac OS X (10.6.8)
Wondering if this is just me... I have a 17"MBP, 8GB, 10.6.1; having occasional, temporary freezes ("pauses" perhaps) where there is no beach ball....just all activity stops for 20-30 seconds and then it resumes like nothing happened (and catches up on all of the clicks and such that happened during the pause).
This often, but not always, happens when switching spaces (I have VMWare running XP in a second space).
Since I use Snow Leopard I get randomly (around 1 to 10 ) freezes. When I get it I can click some applications but can't make changes in it. The beachball keeps spinning for some seconds and after the wait I can just continue working. I first thought it was Firefox, because it almost everytime happens when I am browsing the web, but I get the same with Safari.
It's getting verry annoying now :-(
I already checked:
- Repair disk
- Repair disk permissions
- Run Apple diagnostics
Repairs my 1.5 year old mbp already had:
- 2x keyboard
- Topcase
- Logicboard
- Superdrive
I have had a string of bad luck with my mac, a couple of days ago the screen started flickering and my mac froze (could still move trackpad mouse, not click). It started up fine again.. It did this a couple times more (had to restart pressing power button). Then it froze evereytime I put the power cable in it. I solved this problem with an PRAM reset.
But now it still freezes up, the screen will start flickering and i can only move the mouse. When i try to reboot it gets stuck on the grey screen. only once every 20 times Ill get into the os.
I have tried a pram reset, holding the power button, safe mode, hardware test (no probs found), starting up without external devices.
It wont boot from the cd if it is stuck on the grey screen...
Could someone may be tell me what to do? thinking about bringing it to the store tomorrow .
I did this twice, instaled win 7 using booth camp. The problem started when I boot os X. Every launch new aplication I saw 30 minutes of that creapy rainbow, just all os X freeze for this time, I could just wait. restarting os X doesn't . so I must restored partition of Win7.
View 1 Replies View RelatedI have a unibody Macbook Pro running OSX 10.6.3. Everything is up to date but the computer is now on its second hard drive and fresh install of OSX and is still unusable. After the hard drive was replaced, it worked flawlessly for an evening. However, the old symptoms reemerged the next morning. Symptoms: very slow to boot or freezes on gray screen with status circle frozen grey circle with slash through it on boot
once it boots, if it does boot, the beachball constantly spins/freezes... I have literally no software installed on the fresh install and it still does it when attempting to boot in safe mode Also, the hard drive when checked gives the following errors even after I repair them in drive genius (the same errors the old drive reported):
invalid file count
invalid directory count
After upgrading a desktop Mac from OSX 10.4 to Snow Leopard 10.6 it freezes up. Should I start all over again from the beginning or is there a way to find the problem?
Info:
iMac, Mac OS X (10.6)
Only a laserprinter is connected. Sometimes I can work for a few weeks without problem, but then the computer freezes. The computer sounds 3 monotone chimes in a row and repeats this, keyboard an mouse become inactive till I do a hard shutdown.Took the computer 2 times to the Apple store, they tested for a week but apparently nothing happened then.
Info:
iMac, Mac OS X (10.6.8)
A few months ago I had a problem with my Macbook Pro, (late 2009 model, 15" 2.53 ghz) that many users with Snow Leopard have, the random 30 second freezes. I simply reset the PRAM and SMC and I never encountered it again. Now, out of the blue, on Sunday (yesterday), I started experiencing these hangs again, but worse. The night before I had been browsing the web and my battery went to reserve and shut down, so I plugged it in and when I awoke and turned it on I started experiencing problems. I figured I would try the same fix, and it almost seemed to make the problem worse. Now if I shut down the computer via "apple -> shut down", then turn it back on and log in etc., from the first few seconds the machine hangs. If I open a folder I get the immediate beach-ball and the machine is un-responsive for anywhere from 1 minute - 5+ minutes.
I have read a lot of fixes for this problem, but most of the people's problems resulted from using Safari or Spotlight. I strictly use Firefox and very rarely even open Safari, and I think I've used Spotlight maybe 3 times total, none in the past few months. So far the things I've tried are:
- Reset PRAM
- Reset SMC
- Run Disc Utility and verify, repair etc. (from SL install disc)
So I'm wondering right now what can I do? Its finals week right now and im in college so wiping my HD is not an option. I feel like there is just something hanging the computer but I can't find the culprit.
I just purchased my mac book pro on the 18th of may from an apple store, brand new. I decided to upgrade the RAM myself since it is a much better deal, however once I replaced the RAM my computer began to run much slower and it began crashing (showing a gray window that says "please restart your computer" in many different languages) so i restarted my computer and the problem continues, after 12min of running that window appears. I replaced the RAM with the original and the problem still continued. I have run normal hardware tests and extended hardware tests as well as PRAM reset and still nothing changed. Does anyone have any idea what is going on? I'm totally lost on what is going on with my brandnew macbook pro!I should also add, I have been running the extended hardware test multiple times to see if it will crash during that and after 1hr it hasnt crashed yet.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Lion OS
I have a 20" iMac mid 2007 2.4Ghz, 320GB, 2Gb machine running Snow Leopard. Today I turned it on and it was running fine. But around three hours of using it suddenly froze. I had to force the turn off using the power button. When i turned it back on it took about 4 mins to get to the login screen. Once I logged in the spinning wheel came up and the only think that loaded was the Spotlight sign. This kept happening until about the third time of turning it off and on. When it finally completed login. But it is now extremely slow and it just about freezes when I open more than one application.
View 4 Replies View RelatedBecause of the many problems I heard about using FCS3 with Snow Leopard when they both first came out, I've held off upgrading my OS from 10.5.8. Now that some time has passed, is it safe to install Snow Leopard without worrying about freezes and crashes with using Final Cut Studio 3? Also, have most of the 3d party software developers updated their apps for 10.6? I'd like to install Snow Leopard for my other apps but not at the expense of FCS.
Information:
MacBook Pro Core Duo 2 2.16 Mhz
Mac OS X (10.5.8)
My mac freezes while trying to download snow leopard. I have turned the mac off and back on and tried it again. I have tried it 3 times, same results.
Info:
MacBook, Mac OS X (10.4.9)
My Snow leopard machine hangs during startup at the screen with the Grey Apple logo. It appears there is a SW issue with my OS X boot partition. Here are facts I have learned:The computer boots fine if I hold option at startup and select my boot camp partitionThe compute boots fine if I attach an external HD with OS X 10.6Running a disk repair from the external HD, I see the following two issues that are repaired. Also, note the last line about boot partitionsAfter this disk repair, the disk will still not boot, it hangs at the Grey Apple logo.Booting in safe mode does not resolve the issue, the machine will still not boot to a desktopBooting in Verbose mode, drivers initialize with the last succesful line being the ethernet drives (I believe) and then the hangup occurs. It is unclear what state the boot process is at on the hangup.
This situation has happen twice in the past few weeks. The first time I did a reinstall of OS X to resolve the issue. Then, the issue appeared again approximately two weeks later. I'm hoping to avoid a second reinstall (And really, avoid this issue in the future). It seems perhaps something in the boot partition table or the OS partition, although disk utility says the partition is fine. I have downloaded Test Disk 6.13 to look at the partition table, but I don't know how to interpret the outputs of that program.
Info:
MacBook Pro (15-inch Core 2 Duo), Mac OS X (10.6.3), 2 GB RAM, Boot Camp, Ex HD avail
Every few weeks my iMac will suddenly freeze, the screen going black or white or pink etc. The only way I can get the computer back is to hold down the power button to force a shutdown. Then after a restart everything is OK for a few more weeks. Usually it occurs when I am on the internet. I click on something and suddenly the computer is frozen. I am on OS X 10.6.8 and usually use Safari. Ironically when I opened this forum 5 minutes ago there was a similar sounding problem at the top of the list!
Info:
iMac, Mac OS X (10.6.8), FCE 4 + FCS 3 . . . Little Knowledge, Many Opinions.
Can I update this machine with Leopard or Snow Leopard?
View 2 Replies View RelatedHave installed an 120GB SSD in my Macbook Pro 2010 but have had a couple of problems. Sometimes when you try to enter time machine and or Finder the machine freezes. Also the only way out of this is to hold the power button down and reboot. I have been informed by Apple that there are slight differences between the 2009 and 2010 models. Another odd thing is Skype will not load up automatically on startup, despite making sure this option is ticked. Most other things seem to work. Reinstall original hard drive and all OK.I have tried this with OCZ and Crucial SSDs and get same result. I have also installed the SSDs by cloning and by direct original OS X disk.
View 11 Replies View Relatedpossible to back up all your data with Time Machine on Leopard and then install Snow Leopard and use Time Machine to restore all of your pictures/movies/music and the like?
I'm going to assume it's a no go since Time Machine is capable of a full system backup -- it may just turn your system back into Leopard?
I am a little new to Time Machine, so I was wondering if anyone could answer this? I am currently using Time Machine to backup my Mac. I am running Leopard and I want to move to Snow Leopard when it comes out. When i get Snow Leopard, I will perform a reformat on my hard drive so its a nice fresh install. My question is what options will I get when I get when I go to install it as I have Time Machine? I'll be honest and say I'll be happy to just copy across my iTunes, iPhoto, contacts and calender over to Snow Leopard and not worry about anything else (stuff like downloading Firefox takes seconds and isn't a problem). Is this an option? Can i just install Snow Leopard totally fresh, then connect the Time Machine drive and copy the iTunes (etc etc) folders/files/docments over to my fresh install?
View 6 Replies View RelatedI just tried and everything seems non-responsive or on a 2 minute delay. I use Time Capsule and Time Machine and things are just not acceptable at this speed.
Also, I don't think the archives are right. I used to have a ton of things on my desktop - most of which I cleaned recently by moving or deleting the files.
However, going back a few months in Time Machine, the only files that show up in my desktop folder/view are the ones that are on my desktop today. All the older, moved or deleted files no longer show up in Time Machine.
I just got my new machine the other day. Loaded up Snow Leopard on one Hard drive and windows 7 on the other. Anyone else have a similar setup. Wanted to get some feedback. For most of my work I will use SL, but when I game I will load up Windows 7.
View 16 Replies View RelatedI have a Apple Time Capsule which is used as a Time Machine Backup Facility and also a Wireless Hub for File Sharing and Internet Connection. I've been using Leopard for a couple of years without any significant problems. The other day, I installed Snow Leopard and suddenly, I'm facing a number of different problems and errors regarding backups to the Time Machine with the Time Capsule.
First, I was facing problems with a Case Sensitive error and now that I have ejected the Time Capsule, the Disk Utility has come up with a different name altogether and now I have the added problem of disk space on the time capsule. I know I could re-format and start over but that would defeat the whole point of my backups. The Time Machine/Capsule should re-write over the old backups when making space for new ones but its just giving me an error about not enough disk space.
My issue with time machine is it says another network is using my id. Now amber light is continuous even after restart, and says I have no dns.
Info:
time machine, Mac OS X (10.6.3)
If I open Time Machine app I get the message 'your time machine backup disk can't be found'. When I click on the 'setup time machine' option the window closes and nothing happens.
Info:
imac 2.4GHZ, 6GB RAM, 500GB HD, Mac OS X (10.6.6), RME FF400
If I am backing up everything on a external hard drive using time machine and it hasn't finished can I stop it and start it again the next day?
Info:
iMac, Mac OS X (10.6.8)
I finally upgraded to Snow Leopard. I have some older software and everything was working fine, so I delayed. I have an Intel 2 x 2.66 Dual Core. Now, I keep getting an error whenever I try to run Time Machine. So far, this is what I have done: Used disk Utility, Disk Warrior, then disk utility again (erased back up drive), then downloaded and reinstalled using the 10.6.8 combo update. Disk Utility again. Tried to backup and got the same error: The backup was not performed because an error occurred while copying files to the backup disk.
After reading online I downloaded and installed backup buddy (I think) Anyway, this is the error that it gives: Starting standard backup?Backing up to: /Volumes/Backup/Backups.backupdb?Backup content size: 91.4 GB excluded items size: 65.6 MB for volume Knight/Freelance?No pre-backup thinning needed: 109.60 GB requested (including padding), 364.91 GB available
Error: (2) setxattr for key:com.apple.backupd.SnapshotVolumeUUID path:/Volumes/Backup/Backups.backupdb/Cris Chapin’s Mac Pro/2012-04-24-150718.inProgress/79588860-5BD3-4E5D-BFB6-43E7F02A9BCA/Knight/Fr eelance size:37
[code]...
Info:
Mac Intel, Mac OS X (10.6.8)
