I did this twice, instaled win 7 using booth camp. The problem started when I boot os X. Every launch new aplication I saw 30 minutes of that creapy rainbow, just all os X freeze for this time, I could just wait. restarting os X doesn't . so I must restored partition of Win7.
View 1 RepliesA few months ago I had a problem with my Macbook Pro, (late 2009 model, 15" 2.53 ghz) that many users with Snow Leopard have, the random 30 second freezes. I simply reset the PRAM and SMC and I never encountered it again. Now, out of the blue, on Sunday (yesterday), I started experiencing these hangs again, but worse. The night before I had been browsing the web and my battery went to reserve and shut down, so I plugged it in and when I awoke and turned it on I started experiencing problems. I figured I would try the same fix, and it almost seemed to make the problem worse. Now if I shut down the computer via "apple -> shut down", then turn it back on and log in etc., from the first few seconds the machine hangs. If I open a folder I get the immediate beach-ball and the machine is un-responsive for anywhere from 1 minute - 5+ minutes.
I have read a lot of fixes for this problem, but most of the people's problems resulted from using Safari or Spotlight. I strictly use Firefox and very rarely even open Safari, and I think I've used Spotlight maybe 3 times total, none in the past few months. So far the things I've tried are:
- Reset PRAM
- Reset SMC
- Run Disc Utility and verify, repair etc. (from SL install disc)
So I'm wondering right now what can I do? Its finals week right now and im in college so wiping my HD is not an option. I feel like there is just something hanging the computer but I can't find the culprit.
I have a 20" iMac mid 2007 2.4Ghz, 320GB, 2Gb machine running Snow Leopard. Today I turned it on and it was running fine. But around three hours of using it suddenly froze. I had to force the turn off using the power button. When i turned it back on it took about 4 mins to get to the login screen. Once I logged in the spinning wheel came up and the only think that loaded was the Spotlight sign. This kept happening until about the third time of turning it off and on. When it finally completed login. But it is now extremely slow and it just about freezes when I open more than one application.
View 4 Replies View RelatedSo I bought the $29 single user version. When installing it didn't ask for a serial code or anything. Can this disc be used to upgrade other systems?
View 1 Replies View RelatedI recently discovered after installing the new Snow Leopard OS that I did not have a bluetooth option under my system preferences. I own a mid 2008 Macbook Pro (pre-unibody, more info below) and I know that I've used it before. I recently took my computer in to be repaired by Apple because the keyboard and trackpad were inconsistently responsive, and to fix it they simply replaced the entire top panel (with the keyboard and trackpad). I have also checked under the system profiler and it says that there is no information available for my bluetooth...what exactly does this mean? Did they forget to reinstall it? or what?
View 1 Replies View RelatedGuys, i just installed Leopard 10.5.8, and then created a new user account afterwards. But when i tried to log in to the new account, the screen just freezes after loading. No response to any keys. Just freezes, and this new account is basically inaccessible.
View 2 Replies View RelatedI have a 17" iMac G4 that I was rung Tiger with, then I installed Leopard 10.5. I use this as a second computer. All is fine except that my Epson scanner does not work with 10.5. I've tried the latest drivers. I'd like to reinstall Tiger. I used the 10.5 disc to reformat the drive and start from square one. When I boot from my original Tiger disc it starts opening it's windows, but when I get to the point where I can choose Install or use Disk Utility to reformat from the Tiger disc, all windows freeze and I need to hard reboot from the power switch. Am I correct to assume that 10.5 won't let 10.4 to reinstall. Is this correct?
View 5 Replies View RelatedDid an upgrade install from 10.5.8 to SL (MacPro early 2008, 8800 Nvidia). Didn't use the Mac for a couple of hours - when I came back I had a black screen and no way of reviving Mac (only forced shutdown via power button). this happened twice. Did never have a problem previously.
View 7 Replies View RelatedI bought a used MaxBook (2,0 GHz Intel Core Duo , 2 GB RAM, 80GB HDD) and try to install 10.6 Snow Leopard (Family License).The MacBook HD doesn't have any data on it, as the pre-owner completely cleaned the HDD. I put the SnowLeopard CD in the CD-Drive and press the C-Button during booting and start the install process according to the dialog that shows up.The installation starts and shows me in the beginning it will take 34 minutes to install. The process continues till the countdown shows 28 minutes’ and then the installation process freezes. I only here some repeating noise from the CD-Drive but nothing happens. I tried this process now several times, I was waiting for hours that the install may continue, but no success so far.... Does somebody have any idea what I could do install 10.6 successfully? I don't think it's a license issue, but I want to add that I also own a MacMini and with the same install CD was successfully installing 10.6 on the MacMini.
Info:MacBook (13-inch), Mac OS X (10.6.8)
Odd freezing occurs when trying to log off. It requires me to hold down the power button and basically restart the machine. Is this a sign of a virus infection, or have I done something else I don't know about?
Info:
iMac 3.2Ghz i3, 21", Mac OS X (10.6.5)
I have a tower Mac Pro with Snow Leopard running on it.Unfortunately one of the software that I use doesn't have yet a Snow Leopard update. So I am thinking maybe I can install older version of Leopard on one of the internal drives (i have 3 additional internal drives), so I can boot my computer from either Leopard or Snow Leopard, depending on needs (i don't want to get rid of Snow Leopard).
I never installed OS X system before, so I am a bit scared.The internal drive is ready, I have the old Leopard on disks, what are the next steps to take?
Wondering if this is just me... I have a 17"MBP, 8GB, 10.6.1; having occasional, temporary freezes ("pauses" perhaps) where there is no beach ball....just all activity stops for 20-30 seconds and then it resumes like nothing happened (and catches up on all of the clicks and such that happened during the pause).
This often, but not always, happens when switching spaces (I have VMWare running XP in a second space).
Since I use Snow Leopard I get randomly (around 1 to 10 ) freezes. When I get it I can click some applications but can't make changes in it. The beachball keeps spinning for some seconds and after the wait I can just continue working. I first thought it was Firefox, because it almost everytime happens when I am browsing the web, but I get the same with Safari.
It's getting verry annoying now :-(
I already checked:
- Repair disk
- Repair disk permissions
- Run Apple diagnostics
Repairs my 1.5 year old mbp already had:
- 2x keyboard
- Topcase
- Logicboard
- Superdrive
I have had a string of bad luck with my mac, a couple of days ago the screen started flickering and my mac froze (could still move trackpad mouse, not click). It started up fine again.. It did this a couple times more (had to restart pressing power button). Then it froze evereytime I put the power cable in it. I solved this problem with an PRAM reset.
But now it still freezes up, the screen will start flickering and i can only move the mouse. When i try to reboot it gets stuck on the grey screen. only once every 20 times Ill get into the os.
I have tried a pram reset, holding the power button, safe mode, hardware test (no probs found), starting up without external devices.
It wont boot from the cd if it is stuck on the grey screen...
Could someone may be tell me what to do? thinking about bringing it to the store tomorrow .
I have a unibody Macbook Pro running OSX 10.6.3. Everything is up to date but the computer is now on its second hard drive and fresh install of OSX and is still unusable. After the hard drive was replaced, it worked flawlessly for an evening. However, the old symptoms reemerged the next morning. Symptoms: very slow to boot or freezes on gray screen with status circle frozen grey circle with slash through it on boot
once it boots, if it does boot, the beachball constantly spins/freezes... I have literally no software installed on the fresh install and it still does it when attempting to boot in safe mode Also, the hard drive when checked gives the following errors even after I repair them in drive genius (the same errors the old drive reported):
invalid file count
invalid directory count
After upgrading a desktop Mac from OSX 10.4 to Snow Leopard 10.6 it freezes up. Should I start all over again from the beginning or is there a way to find the problem?
Info:
iMac, Mac OS X (10.6)
Only a laserprinter is connected. Sometimes I can work for a few weeks without problem, but then the computer freezes. The computer sounds 3 monotone chimes in a row and repeats this, keyboard an mouse become inactive till I do a hard shutdown.Took the computer 2 times to the Apple store, they tested for a week but apparently nothing happened then.
Info:
iMac, Mac OS X (10.6.8)
Question in the title - just wondering if I will need to upgrade to Leopard before Snow Leopard.
View 3 Replies View RelatedI just purchased my mac book pro on the 18th of may from an apple store, brand new. I decided to upgrade the RAM myself since it is a much better deal, however once I replaced the RAM my computer began to run much slower and it began crashing (showing a gray window that says "please restart your computer" in many different languages) so i restarted my computer and the problem continues, after 12min of running that window appears. I replaced the RAM with the original and the problem still continued. I have run normal hardware tests and extended hardware tests as well as PRAM reset and still nothing changed. Does anyone have any idea what is going on? I'm totally lost on what is going on with my brandnew macbook pro!I should also add, I have been running the extended hardware test multiple times to see if it will crash during that and after 1hr it hasnt crashed yet.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Lion OS
I have a mid-2008 (June) MBP 15". Just upgraded to SL last night. I am having a serious issue with time machine. I've been using it with the same external HD since I bought my mac last year. No issues up until I installed SL last night. This morning (my first backup since upgrading), time machine started backing up (~ 9Gb) but just stops at around 300Mb. The clock keeps spinning, but there is no change in the amount backed up.
I'm reading that other folks are having this issue as well. Has anyone figured something out? I've run disk repair (nothing found), restarted my mac & external HD (several times each), and cancelled and restarted the time machine backup (several times). Each time it freezes at a different amount (i.e. 34Mb, 284.2Mb, etc...).
Because of the many problems I heard about using FCS3 with Snow Leopard when they both first came out, I've held off upgrading my OS from 10.5.8. Now that some time has passed, is it safe to install Snow Leopard without worrying about freezes and crashes with using Final Cut Studio 3? Also, have most of the 3d party software developers updated their apps for 10.6? I'd like to install Snow Leopard for my other apps but not at the expense of FCS.
Information:
MacBook Pro Core Duo 2 2.16 Mhz
Mac OS X (10.5.8)
My mac freezes while trying to download snow leopard. I have turned the mac off and back on and tried it again. I have tried it 3 times, same results.
Info:
MacBook, Mac OS X (10.4.9)
My Snow leopard machine hangs during startup at the screen with the Grey Apple logo. It appears there is a SW issue with my OS X boot partition. Here are facts I have learned:The computer boots fine if I hold option at startup and select my boot camp partitionThe compute boots fine if I attach an external HD with OS X 10.6Running a disk repair from the external HD, I see the following two issues that are repaired. Also, note the last line about boot partitionsAfter this disk repair, the disk will still not boot, it hangs at the Grey Apple logo.Booting in safe mode does not resolve the issue, the machine will still not boot to a desktopBooting in Verbose mode, drivers initialize with the last succesful line being the ethernet drives (I believe) and then the hangup occurs. It is unclear what state the boot process is at on the hangup.
This situation has happen twice in the past few weeks. The first time I did a reinstall of OS X to resolve the issue. Then, the issue appeared again approximately two weeks later. I'm hoping to avoid a second reinstall (And really, avoid this issue in the future). It seems perhaps something in the boot partition table or the OS partition, although disk utility says the partition is fine. I have downloaded Test Disk 6.13 to look at the partition table, but I don't know how to interpret the outputs of that program.
Info:
MacBook Pro (15-inch Core 2 Duo), Mac OS X (10.6.3), 2 GB RAM, Boot Camp, Ex HD avail
Hey peeps. I got my retail copy of Snow Leopard. Unfortunately, my Super Drive seems to not read Dual layered DVD's (including Snow Leopard, my regular Leopard, etc) Is there a way I can install booting from a USB drive? Or a Firewire drive?
View 2 Replies View RelatedIm having a few problems with my new instal of snow leopard
1. When ever i shut my mac down and restart it says insert a bootable disk, i have to then restart again and hold down, the alt button and manualy select the macintosh hd
2. Time machine is taking longer o backup, and icon on the menu bar is always grey and not black.
3. system is running extremely slow
Well in my quest to upgrade my MBP 5,1 I got my memory and a 500 GB Seagate Momentus XT from Newegg. I'm enjoying 4 GB of RAM now. So, I'm debating with myself about what to do. Obviously, a new HDD is a great opportunity to install Snow Leopard and start from a clean slate. Or I was thinking about cloning my current Leopard install to an external HDD with CCC, but I'm having trouble understanding how I would accomplish getting it back. I'm thinking you can do this by booting from the install disc, but I'm not sure. So, if I go the SL route, will I be able to use Migration Assistant and an external enclosure (if anyone could recommend one, that would be great!) for the old boot drive to move my important stuff over?
View 9 Replies View RelatedI have a MacBook Pro running 10.6 and a Mac Pro running 10.5.8.
Can I install 10.6 on the Mac Pro from the Installation DVD that came with the laptop or does Apple require me to buy the software twice?
Info:
Logic Pro, Mac OS X (10.5.8), Mac Pro 8 core/ Apogee Rosetta 800
Some weeks ago I accidentally deleted the app x11 from my iMac (I have the version 10.6.8). Now I am trying to install a game that needs that app. I've tried to download and re-install the x11 from the Apple website, but when I'm installing it, a message shows up saying that "x11 can't be installed. a more recent version of this software is already installed". but that's impossible, since I deleted it! I've been looking through my iMac with the Finder and the app x11 doesn't show up, so it is definitely not in my computer. What can I do to install the x11 in my iMac again? I don't think it's possible that the app still remains in my computer.
Info:
iMac, Mac OS X (10.6.8)
I'm trying to install Mac OS X Snow Leopard on to my macbook but I keep getting this error.
"mac os x installation couldn't be completed" I get this message usually within 5 minutes of installation.
My macbook specs are...
Mac OS X Version 10.5.8, 2.16 GHz Intel Core 2 Duo, 1 GB 667 Mhz DDR2 SDRAM
I've already tried repairing the disks. (I repaired my leopard with the snow leopard CD because I couldn't find the leopard CD.
I heard it was fine to do.) I would have tried to verify and repair the partition but the buttons seemed to be grayed out for some reason.
Here is the error log...
[URL]
(sorry for the download, forum rules. "the text that you have entered is too long (123483 characters). Please shorten it to 20000 characters long.")
Will it install like the OS does on the iPhone, as in the existing data isn't put in a new folder? What exactly happens when you install a new OSX?
View 1 Replies View Related