getting tired of switching the cable every time I want to get online (not to mention feel like I'm stepping on their toes when they want to get online and I'm on!).
I have a first gene iMac g5 at work that does not have wifi. I found a USB wifi adapter on amazon for $15. If I use that, can i share my Internet connection over wifi just like i can with a built in airport card in my macbook pro?
I have an ibook with Leopard installed and its connected to the internet through airport. What I'm trying to do is share the internet connection to my xbox via an internet cable but i cant find any settings in system preferences to do that.
I've got a Mac Pro and a Linksys Wireless N Router. I've got my cable modem hooked up at the moment directly to my Mac Pro. I was wondering if there was a way to share my internet connection on my other connection to the router? In other words, internet comes into the Mac Pro, shares with the wireless router, which broadcasts it to a third computer.
I know that it's possible to share a wired internet connection from one mac to another computer through wireless, but I was was wondering if it's possible to do the reverse: share a mac's wireless internet connection through the ethernet port.Ideally, the setup I want is to have my iMac connected to wifi and have my xbox 360 connected to the iMac with an ethernet cable.
I was wondering if it is possible to connect a desktop and laptop computer using apple share or bluetooth to share an internet connection that is connected through an ethernet port on the desktop. My internet company is crap so I need to find a way to cut out the router, which I have to reset all the time to get a normal internet speed.
Desktop is a Mac Pro bought last April, and the laptop is a 12" Powerbook G4. Both have bluetooth, airport, and the newest operating system.
I have an older G5. Running Ethernet cables across the hallway is not going to work. Is there a Wi-Fi card, chip, usb solution? Or can I share an internet connection with my MacPro in the same room?
I have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online. The past couple days, however, the connection just won't share.
Ok so within the last day my internet sharing has been working fine, it just won't let incoming devices connect to it. I.E. my Ipod Touch sees my MacBook Pro, but doesn't get an IP I believe, same case with my iPhone because it tries to use the Wifi, but since it can't properly connect either, it switches to 3G. If I disable the Firewall, everything works as it should, so the Firewall is definitely the problem. What I am stuck on is how to configure it properly so that I can use internet sharing, while having the firewall enabled. I haven't even touched anything related to the Firewall in months, so the fact that this just randomly happened is beyond me. I have even made sure that the internet sharing program in the firewall list has the "Allow incoming connections" toggle selected. I haven't touched the box that says "Allow signed software to receive incoming connections," but that box has always been enabled for months. I can't remember now, but I think initially when I came up with the idea that Firewall was causing problems, I noticed that the internet sharing program in the firewall config list actually had the "Block incoming connections" toggle selected. I thought allowing incoming connections would surely fix this, but I guess not.
Hey everybody , I just bought a 15" MBP yesterday , unboxed it , turned on.. everything is fine , surfing the net... , and then installed SL , the internet start having some problems , like losing connection...etc , after that i couldn't connect , "connection timeout" I thought it was from the SL , so I deleted it and installed Leopard , but still the same problem , also if I try to connect from the iPhone or the iPod touch through wifi , it says unable to connect...
My Internet connection periodically stops. Email access stops, web pages stop, etc. Other comps on my network don't have the issue. It's not all the time, but it is every day. I haven't tested with a new test account, because I simply don't have the down time, but I would love some diagnostic tool or technique that will allow me to continue working and test when the connection goes down...
I've just purchased a Power Mac G4 desktop type of computer from a friend of mine. I've asked around and I was told it wasn't able to connect to a wireless internet connection inside of my house.
So my 6 month old Unibody has had an issue for a while that it drops the internet connection, though keeping the network/WiFi connection. It started out just on campus where there is a campus wide SSID that is unencrypted, though requires a login to start browsing. A restart of the computer fixes this issue, though it always repeats itself (usually after 30-45 minutes of browsing, no downloading). Lately, the issue has been getting worse. It is now dropping the connection on other APs, and even stops the Airport card altogether (KisMac can't even scan). I had a backlight bleeding issue fixed by Apple. Is this connected? I know the airport card is in the screen, so maybe they didn't fix it well.
I'm not receiving emails. Internet connection is fine. I was told by my provider that I need to reset my emails. How do I do that without losing all emails in my inbox?
Sometimes I am unable to share my photos in iPhoto 9.2.1 as the options are darkened with "No network connection" above. But I am connected, I can browse webpages and send/receive email.
I have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
i've recently got the Ethernet adapter for MBA and I am still unable to connect to my home internet connection... It continues to give me a "self-assigned IP".
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?
Info: MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
I'm on holiday using my mobile phone (Nokia N80) to connect to the Internet over GPRS / EDGE / UMTS. Everything works like a charm, but often the Internet Connect applet drops the connection and just hangs disconnecting.
I'm running OS X 10.4.7 on a 17" Macbook pro, but I have the same result on a iBook G4, same OS X version, and even trying with a different mobile phone (Nokia 6600) and different network service provider.
new AppleTV and the possibility to access Netflix is my new goal. I am located in Norway, so it won't work without som tweaks.My solution is to buy a Pro VPN service from strongvpn.com, but that will only get it to work on my mac, not the Apple TV.I tried to share my work-VPN through airport to do a proof-of-concept, but I didn't get any internet.Is this possible to do? My iMac is connected to my Time Capsule through ethernet
i have my mac pro using one ethernet port for net connection can i put a sec cable in the other port connect it to my macbook pro and share the connection?
So I have just moved into a new flat in the centre of Sheffield UK. We are in the process of sorting out the best internet connection possible and it seems to be the pre wired connections that are in the bedrooms which are at 50Mb/sec... great. BUT! We want to share this wirelessly and as the only connection is via this walled socket (See attached photo) I don't know how to do it. It is not a standard BT wall socket but instead is something that an rj45 cable can plug into. Currently I have set up a wireless network by putting an rj45 cable from the wall directly into my mac mini and have set up internet sharing however this means that if I wanted to move or turn off my computer the wireless network would be lost! I have tried already connecting a current wireless router that I have (a Zyxel p-661hw-d1) but there is no dsl connection and therefore no internet. Would I need a wireless bridge? Just so you know the ISP is called Ask4, google it and you get to the homepage.
I want to connect my MAC PRO to my time machine by ethernet and then my time machine to my ADSL Modem Router by wireless..e.gINTERNET >> ADSL MODEM >> TIME MACHINE >> MAC PROat the moment I have..INTERNET >> ADSL MODEM >> MAC PRO >> TIME MACHINEwhich I dont want.. And please could you give me a step by step walkthrough.. really detailed..
I'm trying to share my wireless internet connection from my mac to my PC, the mac is connected to a switch with a tp cable and my windows pc as well.The switch doesn't have dhcp so I had to manually type in the ip address