I just bought a new Western Digital 750GB laptop drive for my 13" macbook pro. I have a transcend external enclosure, to hook it up as an external via usb, and I had planned on using CCC to clone my existing 250gb to the new drive, and then swapping them.
However, at first plugging the drive in, my MBP didn't see it at all. The lights came on, and the drive sounded like it started... but it didn't appear in disk utility.
I unscrewed it from the enclosure, and then re-attached everything, and the 2nd time around, this time my MBP saw the drive. So it's possible (I guess) that something wasn't fully connected in the enclosure.
My first action was to open disk utility and try to partition the drive. But when I chose the "1 partition" route, I got an error when it attempted to unmount the drive, and wouldn't let me continue. So I then opted to "erase" the drive, and it did that no problem.
Then I did a "verify" on the disk, and it again reported no problem. So just for giggles, I then attempted to "partition" the drive again, and voila, same error.
After my macbook hard drive kindly failed on me, I ordered a new Seagate Momentus 5400.5, 320gb hard drive. I popped that sucker in this afternoon and began to start up my macbook with the OS X disc 1. Everything was going smoothly, except that it can't find the hard drive. It is recognized under my disk utility, but when I click to partition it, select options, select GUID, click 'OK', I can neither Name it 'Macintosh HD' or do anything else.
I can't proceed with anything because when it asks me to select a HD, the HD does not show up. Again, everything works except that the hard drive is not found. I pulled the hard drive out. Made sure the screws were alright. Made sure everything was all snuggly, and yet it still won't work.
So I tried to partition my 1TB Seagate main hard drive that's in my iMac, and twice my iMac locked up at the "Shrinking volume" stage. I tried to shrink it down from 1TB to 600GB and it not only did not work, my system locked up (I gave it plenty of time) to the point where I had to forcibly shut it down and a subsequent verification of the disk revealed that it needed to be repaired using Disk Utility after restarting and booting from my OS X installation disk, which worked just fine.
I decided to try again, because the first time, I had not restarted the computer in a while, so I thought I'd "flush out" any temporary files, cache, inactive RAM, and whatever else might have been in the way the first time around. However, this time, the screen simply turned off after 15 or so minutes. Once again, it got stuck at the "Shrinking volume" point and there was also no way to revive it except for a forced shutdown, which, by the way, I did by holding down the power button on the back of the iMac. Same story, I had to restart and repair the disk using my OS X installation disk, which resolved the repair issue.
One more thing. I remember that when I first received my iMac, I was able to partition the drive in order to add a volume for Boot Camp, which I formatted in NTFS right before my Windows 7 installation. All of that worked great and I was actually impressed with how flawless that whole process executed. Eventually, I decided that I no longer needed Windows 7, so I erased the partition and re-consolidated it with the main OS X partition, again, without any problems.
With all of that said, I'm not sure what to try next, but I would really like to create 2 additional volumes. I thought I would try using Disk Utility again, but this time, booting from my OS X installation disk. Then again I didn't want to chance it again, as I have not made any backups yet. I'm in the process of making a backup right now.
So what do you guys think? Should I try to do just that, using Disk Utility after booting into the installation disk? What do you guys think is the reason as to why I can't just resize and partition using Disk Utility after a regular boot-up like I was able to before? What else could I try? Any third-party software titles like I used in Windows? Acronis and Partition Manager come to mind. I'd rather do it in OS X, though.
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
I had my hard drive partitioned into 2, where one was mac the other windows xp. I received this macbook as a gift from my sister so i wanted to reformat everything into mac. I popped in the Mac OS x install cd and just installed it. Now there is two hard drives and I am not able to re-partition it where i can bring it back to one again...I was suppose to delete windows first before re-formating my macbook.
Today I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
My PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
I am trying to partition my current HardDrive so I can run a Macintosh on half of it. The other half will of coarse be windows. I've tried programs like BasiliskII and SoftMac, neither work.
I grabbed some spare 10.4 disks I had, and my computer refused to read them. So I got my hands on a different set of 10.4 install disks and my computer still refused to read them.
I am trying to do this because it's a project for my Computer Hardware class. I've spent way too much time on this without any progress.
My intention is to partition an external HD in half allowing it to serve as a backup for a pc running windows xp, and the other half as a backup for a mac(10.5. I am using a Seagate external HD(new) that was initially partitioned on a windows xp computer.
The 1st half of the 1TB HD was formatted in NTFS format, and the second half was erased and (I thought) reformatted in HFS plus but when I attempt to use CCC(Carbon Copy) to copy the mac 1/2 of the hard drive, I get this message:
"You may have difficulty booting from this target volume, the underlying disk is not formatted with a partitioning scheme that Apple recommends for Intel Macs."
I have read the recommendations that the external HD need to be partitioned with APM or GPT, but I cannot seem to get to that option now for the mac side of the external HD.
In the Disk Utility, the external HD shows both sections of the partitioned drive(the xp section and the leopard). I do not want to reformat the entire drive(both sections) if at all possible.
I just want the Mac side of the ext drive to be properly prepared for CCC, and the windows side to remain as is.
I know this is going to be an incredibly easy fix, but I can't find it. The Hard Drive on my new iMac is not appearing on my desktop, nor is it appearing in the "Device" menu in Finder.
I'm going to buy an iMac with 1TB hard drive. I'm currently using a MacBook Pro with 320GB hard drive, and I haven't partitioned it yet. Is 1TB too big to be one partition? How do you guys partition your hard drive.
I'm trying to partition the internal hard drive on an Alu iMac so it also has a small FAT32 formatted portion, the only problem is, when I go to disk utility FAT32 is not an option under the drop down menu for formats. All it lets me do is Mac OS X Extended (Journaled) or something like that if I recall correctly.
I've got a USB hard drive. Every time I try to partition it with Disk Utility, I get an error message saying it "timed out". The hard drive used to be an OS X boot disk. The only partition it has at the moment is the blank 200MB EFI partition.
I've just bought a used iMac and for some reason it has 3 partitons but two have nothing on them. I've gone into Disk Utility and deleted those two but now the main Partition is still only showing as having 80GB of free space instead of the 200GB it should have. What can I do?
I realize this may be a stupid question but here goes... I have recently installed Windows XP with Boot Camp and now realize more than ever how much I hate XP and was wondering if it were possible to remove that partition all together from the hard drive, and I guess have it added back to my Mac OS side. I think i know the answer but just want to be sure.
It seems as if many people on here use dedicated boot drive with faster read times for applications. I was wondering if partitioning my boot drive would be beneficial in anyway. My boot drive in Bay 1 is a 1TB, it stores everything except my iTunes library, then in Bay 2 I have another 1TB drive that I use CCC weekly to mirror the data from drive 1. If I was to partition the boot drive to use store my applications, and system software and moved all my data (documents, pictures, videos) to the partitioned part of the drive would there be any benefit?
how to partition a hard drive, so I can boot a my Leopard image-file from a separate partition. who has enough patience & time to guide me through to complete this common task. I did the follow things so far to make a separate partition for my disk-image (Leopard Installer):
1. Launched Disk-Utility on Tiger 10.4.11 OS X. 2. Clicked on my hard-drive (149.1 GB). 3. Selected "Partition" in that menu (seen above the Volume Information). 4. Selected "2 Partitions" from the "Volume Scheme drop-down menu".
Recently I bought a Mac OS X Leopard, which comes with the Bootcamp. I have the XP operating disk, and Virtual Box, which is another program like Bootcamp. Instead of the bootcamp way of rebooting every time you switch between operating systems, Virtual Box allows both systems to run simultaneously. Instead of taking up space on my hard drive, I purchased a Seagate FreeAgent (Desk Edition) 1TB external drive.
I need to partition this drive in two, to allow the combined running of PC and Mac OS X using Virtual Box. The formats I will be using are FAT 32 and Mac OS Extended (Journaled). The latter is very easy, as I can simply do this on the Mac. However, the FAT 32... Since I am splitting the external hard drive in two, my XP PC cannot create a partition using FAT 32 which is greater than 32GB, and if I create the F32 partition using the Mac it won't be recognized by the PC operating system.
I am installing XP on my mac laptop and am not sure how much space to partition. The laptop's total space is about 235GB with currently 50GB free.
I will only be using Windows for a few specific programs: Autodesk: Toxik, Mudbox, Motionbuilder and Cleaner XL. I probably won't be using the programs too extensively either, I mainly use Maya and I have the OSX version of that.
Based on that info I was hoping to get a rough estimate on how much space I should partition for XP, I don't want to go too low and not be able to install and use everything but at the same time I don't want to put too much space on the XP partition either and end up with wasted space.
As soon as I bought my Mac I created a partition for Windows on Boot Camp. I later realized that I didn't need it, but then it was too late, 30GB of my Hard Drive was already partitioned. Is there a way to revert the process and re-claim my 30GB to use with the Macintosh system?
I have MBP 17", 2,53GHz, hdd is 250GB. I have a lot of music and pictures and quite lot movies. On the other side I have a lot mails. Is it better to make two partitions and keep them separate? What is your suggestion? If I decide to do that, do I need to remove everything from hard drive to make another partition? I never did it before on mac, but I remember that is necessary on windows.
When I try to make another partition on my harddrive (I've already made one housing windows XP), the bootcamp utility that my mac came with only gives me the option of removing the current partition. How do I make another one?
if I could partition my external hard drive so one half holds all my Mac OS X data such as Itunes music and the other half hold my Microsoft Windows files.
I would like to partition my main hard drive so I can install another operating system on the other one and then use either, whenever I wish.
I would prefer to do this from my external drive (Time Capsule) but I dont think the Time Capsule allows for partitions.
In Disk Utility, it shows that I have a 931.5 GB Hitachi Main Disk. Underneath that, indented, it reads Macintosh HD.
When I click on the Hitachi Disk line, it shows me the partition tab.
I can figure out how to partition it - which is to simply add and name a partition and click apply. But I would like to know if this process will erase any data from my hard drive. If it does, then it may not be worth partitioning.
I have software that only runs under 10.4 on my older Imac. I would like to partition hard drive and run 10.6 on one and 10.4 on the other. Is this possible? Can I get instructions?
Info: iMac, Mac OS X (10.6.5), Partition hard drive
I signed up for beta testing for Apple's new OS, OS X Yosemite and I'm currently running OS X Mavericks. I know with every new OS on any device it needs to be beta tested to fix any bugs and I use my MacBook for quite a lot. Is it possible to partition my hard drive like you do when running Windows, and run OS X Mavericks AND OS X Yosemite? The reason I'm asking is because I don't want to be stuck with an OS that's going to prevent me from doing what I need to do.
trying to partition the drive (320 gig) to install windows 7 on. after allocating the space and setting the format to FAT32, it quits about half way and tells me partition failure. try lowering the amount of space devoted to the partition. even when shortening it I keep getting the same error.
i have a 320gb external hard drive and was wondering if i could partition it so i could use it just as an external hard drive on one partition, but have time machine on the other partition. i just recently got my frist mac, which is a macbook, and i love it.
I had windows in a bootcamp partition for a while, and today, i decided to erase the partition and make a new, bigger one. I erased it just fine, but I can't make another one, it just gives me this error: Verification failed: this disk could not be partitioned. Use disk utility to repair this disk. I went to disk utility and i clicked verify disk (repair disk was not highlighted) and it gave me another error: filesystem verify or repair failed. I also repaired disk permissions with no such luck.
