if i type in spotlight, safari for example, you would normally get safari right?
here is what im getting.
along with searching for disk utility.
try it, you will get the actual application and all i get in random garbage.
I accidentally deleted some files and tried spot light to retrieve but not successful. Spot light not applicable for Trash, is that correct?
View 2 Replies View RelatedWhen I turn my brightness all the way down, there's still a barely (but clear, still) lit circle at the centre of my screen. I have a 13'' mbp. I can even see my cursor and move it around. This spot, at very low screen brightness, appears kind of yellowish. When I turn the brightness up, it is not noticeable. The circle part has roughly a two inch diameter.
I've had the mbp for about a month, and just noticed this now. I do turn my brightness down quite a bit, but its usually in a well lit classroom and thus its possible I just did not notice this circle that is still barely lit until now.
UPDATE*: I have just discovered that covering the lit apple logo on the screen's exterior (directly opposite the lit circle i suppose) causing the circle to gradually disappear. THe laptop is sitting behind a window (ie light can shine on that apple logo)...what's up with this?
i have a problem with my imac 21,5 medio 2010, since today i have a white spot/line of 3cm and i have warranty. will apple repair it ?
Info:
iMac (21.5-inch Mid 2010)
My macbook is not charging, the power cord light is not on, and it is plugged in to a live socket.
Info:
PowerBook, Mac OS X (10.7.3)
My MacBook's sleep light does not function unless I place a death-grip on the top case right above the light itself. What should I do to repair this light properly? Any articles I should know about?
View 2 Replies View RelatedMy dictionary is synced to my spotlight, so when I type in a word, it defines it. But now it doesn't. It also loads only a few icons of the files I'm searching. I have MacBook. (2008)
View 1 Replies View RelatedI have no idea what has changed other than I have been messing with GeekTool today. Some of my widgets are not working properly.
iStatPro
VersionTracker
and any WebClip widget
They are all stuck at a fixed size (not the same form one to the next) and redownloading has not fixed the problem.
What's the best way to uninstall this Snow Leopard beast? I've backup files in Time Machine but I'm not sure of what system folders and/or files should be restored.
View 7 Replies View Relatedout of the blue about 3 months ago my MacBook(version10.4.11) started refusing to recognize my home wireless. the problem has now reached the point where it AT TIMES will display that the wireless newtwork is on in the toolbar yet the computer will not jump onto the internet. Now it has reached the point where it won't even show that it sees the wireless in the toolbar. I have reloaded all passwords , checked the Verizon wirelss set up, reloaded firefox , checked all firewalls. The wierd thing is that my kids macbook is fine. Mine is the one with the problem.I checked all my settingts to correspond/copy hers and they do. Have zapped pram too. It works fine EVERYWHERE else but home.
View 3 Replies View RelatedI have an iMac Core 2 Duo running Snow Leopard V10.6.3 with 4 GB RAM... I've seen the threads regarding the inability to "Empty Trash" and the error code. When I open the Trash window, it is empty. When I place a single item into Trash, there is one item seen in the window. When I Empty Trash, there are then six items being deleted. If I place three items into Trash, then eight items are deleted... etc., etc. What are those weird ghostly five items??
View 10 Replies View RelatedStarting about 4 months ago my 3 year-old 2.0GHz Core Duo MacBook's wireless started to not work very well. What was happening is that after starting the computer or waking it from sleep, it was able to connect to my network, but after about 5 seconds it would lose the signal despite being physically very close to the router without anything to block the signal. The problem progressively got worse, and at its worst it was only able to connect about 1 in 10 times. Either it wouldn't find the network at all, or it would find it but couldn't connect because "The connection timed out" or something like that.
I never bothered fixing the problem because my Mac was having a bunch of other issues at the time, so I was just going to fix them all by doing a fresh install of Snow Leopard once it came out.
So 3 days ago I did a fresh install of Snow Leopard (I formatted the harddrive then did a fresh install, not an archive and install). Unfortunately, it only kinda helped the wireless problem: I can now connect half the time rather than 1 in 10 times like it used to be.
I'm quite sure my network isn't the problem because everyone that has used my network in the recent past (which has been about 10 different PCs, Macs, and iPhones) hasn't had any problems. FYI, I have a Linksys WRT54G wireless router.
my ichat was working earlier today and now its not.i installed a couple of things since the last time i tried and i think that is why its not working.
Suddenly my Wacom Bamboo Fun isn't working properly. The pen works fine but the mouse is eratic and wants to open everything it touches. The clickers don't seem to work and it seems to be clicking on everything on its own.I downloaded the most recent software and it hasn't changed anything. I have Leopard on a Mac Powerbook Pro.
View 2 Replies View RelatedI've got a macbook pro unibody and basically of the two usb ports. The lower one is working fine
but the top one is acting a bit funny. If I put my mouse or graphics tablet in there it doesn't work but if I put my phone or usb drive in there they work perfectly.
After doing the superdrive update 2.1 on my macbookpro the drive stopped working. I have tried all the numerous fixes posted on the web. Nothing works. Among other things, I flashed the drive and it now shows as set to all regions, but still doesn't work. Region X cannot change the region either.
Is there any useful news about this widespread problem?
After re-installing Lion I've had this very annoying issue with tap-to-click on the trackpad of my MBP. While it seems to work most of the time, I often have to move the cursor away from the button or click on a window as if to make it active in orer for the click to work. A similar problem is occuring in MS Word when I'm going through the spell check process - I have to sometimes click "ignore" multiple times or click somewhere else in that window for the click to register.
Info:
MacBook Pro, Mac OS X (10.5.4)
I have a macbook pro running 10.6.8 & the cap lock turns on when I press the 2nd bracket key. The cap lock stays on until I press the 2nd bracket key again. It will not turn on when I press the cap lock key or shift cap lock key. I tried resetting all shortcuts in system preferences & rebooting the computer, but it is still the same. I can't use the 2nd bracket key now
Info:MacBookPro, Mac OS X (10.6.8)
YouTube not working properly with Safari. Flash Player and Safari are both up to date. When launching a video on YT the video loads slowly and is very jerky. Evertything works fine with Firefox.
View 1 Replies View Relatedmouse is not working properly. everything was fine in the store but as soon as i got home the mouse was not working
Info:
Mac mini (Mid 2011)
It seems that there is some problems with USB 3 hard drives.I have a NewerTechnology Voyager Q.The drive mounts to the rMBP, but I recieve lots of errors when trying to access the content on it.
Info:
MacBook Pro with Retina display, Mac OS X (10.7.4)
I have a Canon LBP6000 laser printer. I downloaded the Yosemite driver from Canon after updating to Yosemite, and the printer worked up until a few days ago. Now, I can't print. The printer status monitor says "printing" with a status bar, but nothing happens.
I have tried remedies such as deleting all printer drivers, deleting the printer, resetting the printer system, restarting the computer, reinstalling the printer, resetting PRAM, updating to 10.10.1. Nothing has worked so far. It was working fine a few days ago!
I'm on a 2008 MacBook OS X 10.10.1.
Info:
Intel Core 2 Duo 2GHZ, Mac OS X (10.6.2), 2 GB RAM, 160 GB HDD, Superdrive, GeForce 9400 256MB VRAM
I own an 11-inch Mid-2011 MacBook Air. The internal camera flickers on and off and occasionally shuts down completely. Before recent OX update, it didn't come on at all.
Info:
MacBook Air, OS X Mavericks (10.9.2)
After Mavericks Update 10.9.4 sleep mode are not working properly.My Mac Pro goes to sleep but after a amount of time (sometimes minutes, sometimes seconds)the Mac awakes with black screen (monitors in sleep, the mac not). Pressing mouse or keyboard button awakes my monitors. Previews of 10.9.4 nor in earlier releases..Reseting the NVRAM/PRAM doesn't solve my problems.
My System:
MacPro5,1
Xenon 3.00 GHz Quad-Core
48GB DDR3 ECC RAM (4x 16GB)
Apple GeForce GT120 512MB (Slot 1) with Monitor #2 on HDMI
EVGA GeForce GTX580 Classified 3GB (Slot 2) with Monitor #1 on HDMI (plus extra internal PSU in DVD-Tray)
AirPort Extreme incl. BT
Mighty Mouse USB + Magic Mouse BT + Alu Keyboard USB
OS X Mavericks 10.9.4
I just got a new Intel Core i7 Mac and installed MPlayer OSX Extended (Rev 13) on my computer. After installing it, it needed to "update it's font cache" and after doing this, it asked "whether or not to check for updates automatically". However, after I made my choice, the application unexpectedly quit. I tried doing this again several time to no avail. After resetting my computer again multiple times, and reinstalling the application, I finally got the MPlayer Rev 13 to open and play videos. Normally, when I open an application on the dock, the icon "jumps" and then the application opens. However, whenever I open the MPlayer app, it "jumps" and pauses and finishes the jump. Furthermore, whenever I try to go fullscreen (by clicking the screen twice), nothing happens. I have read online that there have been some cases where the borders blacken, but the video stays the same size, but in my case, nothing happens at all.
View 6 Replies View RelatedWell just installed XP on my boot camp partition. Here is my issue:1. The trackpad doesn't seem to be working properly. It's showing under device manager fine but the 2 finger right-click option isn't working. 2. Is the keyboard supposed to be backlit in XP?3. The sound buttons on the keyboard are not working (f11-f12)
View 5 Replies View RelatedOrdered from eBay Graphics Card Upgare (Ati Radeon x1900xt / Part# 102A5202752 000006) for my new Mac Pro (early 2008). It came in white box with Apple logos. Attached and powered it but I get only "No Signal" on my monitors (LCD: Eizo FlexScan S2401W and Samsung SyncMaster 225BW). Tried different cables: DVI-D Single-link, DVI-D dual, DVI-I Dual and VGA+Apple DVI-adaptor - no effect.
It seems like the new card isn't recognized properly?
Every time I click on a PDF in Safari, I get error window. How do I just reset it to use whatever the default would be (Preview presumably)?
View 3 Replies View RelatedRight i've had my white macbook for a few months now, its at 91 cycles and 99% health... this morning i turn it on and the health has dropped to 86% !? any idea why this has happened, and if theres any way i can get it back up.
View 3 Replies View RelatedI just got a mac book pro and I transferred all my applications from my old g4 but handbrake doesn't work the same or doesn't at all. It takes very long to scan and it doesn't let me rip. I tried the same dvd on my old g4 and it worked just fine so it's not the dvd.
View 13 Replies View Related