OS X :: Install Retail Version Of OS X Tiger On IBook G3 600mhz
Jul 29, 2009
I'm trying to install a retail version of OS X Tiger on an iBook G3 600mhz but all I'm getting is a blue screen after the initial grey screen with white apple logo. I've managed to get OS X Panther on it no problem but Tiger is just not playing ball. I'm having to boot up in Target Disk mode or use an external Firewire DVD player and it does the same thing every time. What I can say is that the iBook only has 128mb of RAM at present but I'm upgrading that in a day or two and I didn't think that would necessarily prevent the OS from being installed. Oh and it doesn't need a firmware upgrade.
so I have a very unique, bizarre problem. A friend brought her G4 1.67gHz 15" Powerbook to the office to have it looked at as it wasn't working properly. I took a look at it and found that one of the RAM chips was shorted out. I took it out and ordered her a new pair (since it was like $26 for 2gb, and with the one removed she was running on 512). Here's where it gets bizarre: I installed the new RAM and it was freezing regularly. I then took one out and it was still freezing regularly. I booted it from my Utilities partition (I have a bootable firewire drive set up to fix problems and recover data) and ran Disk Warrior, TechTool, and a whole heapin helpin of other fixin and optimization apps. I got it to fix all the reported errors, TechTool reports no hardware errors, everything should work perfectly. So now, the laptop boots to a blue screen. I can't boot it from a retail Tiger install disc, and I can't boot it from the hard drive, it just boots to the Apple logo, the Unix spinner, and then goes blue and freezes. So I set it as a firewire target drive and was able to do an archive/install of Tiger using my G5. It recognized and installed fine and it booted my G5. Ok, so it's not the drive. I restart and nothing, apple/unix logos then blue screen. Same with the Tiger DVD. I replace the original 512MB stick (the working one) and still same result. So finally I go back to my Firewire repairs disc and everything boots fine, all tests come out fine, drive is recognized and works fine, etc. What could cause a computer to boot, a drive to be bootable, but a computer not being able to boot on any installed drive?
my problem is the following, I have an Ibook G3 which Disk Drive is busted. So i'm trying to install Tiger To it (PPC) by using Target Disk or Disk Target (w/e) mode connecting it with my Mac Book Pro. I restored the Ibook with the disk utility on the MBP putting as source the installer for tiger which I ripped off the img file from the the retail version I bought. And so I rstored it to the HD of the Ibook, takes about 15-10min(Maybe less) and done. When I turn on My Ibook it automatically boots into the installing of OS X process. Everything goes smooth until I get to the part that I have to choose the destination but I can't choose anything because the HD for the Ibook won't show, it doesnt show any possible destination for me to save to. I have read the read me files and everything on the software and about the option botton on the "destination" part but the botton cannot be selected. I read something about the formatt of the Ibook for tiger to work and I have it in "Extended (Jornaled)" and i'm upgrading it from Mac 9 classic, but the drivers for mac 9 aren't installed since I accidentally (w/o knowing) erased everything on the hard drive the first time I did this with the Disk utility.
my hard drive freaked out on my g3 ibook so i went to reinstall tiger on it...i can't get it to boot from an external dvd rom and start the instalation process...it gets a kernel panic and the only thing i can do is shut it off...is there anything that i'm not doing or is the hard drive fubar'd?
I've got a Tiger Retail Disc that I've used on 2 previous machines without a hitch.Now, I urgently need to install Tiger on a 12" 800mhz iBook G3, yet after thirty minutes, it tells me to Try Again!Some erros tell me that there are essential files that can't be copied."Unable to copy package source file /System/Installation/Packages/Essentials.pkg/Contents/Resources/BundleVersions.plist"Some files for Essentials may not have been written correctly"
I have a Ibook G4 that I cannot install tiger to .. I have two problems...
1. When I start with a retail version of Tiger (at least that's what ebay said.) it shows me the grey apple, nice and sharp, and then the screen changes to a horrible, horrible 2 color black and white dithered image of two mighty mouses showing me to add batteries and turn it on. The installer hangs here without a mouse.
2. Since I have a USB mouse (not mighty) I plugged it in and the installation continues but it's still in the horrid black and white dithering (grayscale) that I got on the insert mouse screen.
I can barely read a thing it's that bad... just horrible dithered black and white.
It's not the screen because booting Arch Linux shows a perfect colored frame buffer and the folder with the question mark has proper colors.
Why is an Ibook G4 demanding that I install a mighty mouse to continue installation? How come the track pad will not do? (and yes the track pad does work.)
I bought this machine second hand is it possible that the system firmware is updated to a wrong version?
Because when I check the system info it says Powerbook6,7
I have an external firewire drive and I made an iso of Tiger (from Original CD). I used Disk Utility to make what I think to be a bootable firewire drive.I selected the ISO as the source and the External as the Destination. When I hook up the external to the ibook and hold down the options key I have a gray screen with a refresh and and right pointing arrow.
I have an ibook G3 dual usb which was running Tiger but after an update to 10.4.11 I think it is, was running very slowly and the browser (i tried safari, camino and firefox) was constantly crashing. I have a back-up copy of retail Tiger on DVD as my original disc is scratched and no longer reads.I erased the hdd in hope of a clean install, but when I tried to boot from the dvd it just showed up with the flashing ? I know the disc will boot as it works in my G4 powerbook.
A friend of mine got an iBook G4 14" with a 60GB HD that wasn't working, so he exchanged the HD, but now he is not able to get the iBook up and running because he doesn't have the installation DVDs for Tiger or any other OSX
My question is, could I use my OSX installation DVD (Tiger) in order to install Tiger to his iBook and get it up and running? I have my original installation DVDs and everything that came with my iBook, but I don't know if those will only work with my computer, or if they're limited to be installed in one computer at a time.
how to uninstall my current OS Tiger and install OS Leopard? I am using an iBook G4 1.42 GHz PowerPC with 1.5 GB RAM. 60GB HDD. Are my specs ok to run Leopard?
I have just bought a MacMini Server (2 hard disks) built early December 2010. It comes with SL Server. My old setup was a normal version of SL.if I can import the old account from the SL version in to SLS?
Info: MBP, MM, MBP - 10.6 + Windows XP on a hard partition
I have the Win 7 RTM currently installed on my Mac Pro, on a dedicated internal hard drive. I'm running VMware 2.0. I have the retail version of Win 7 arriving today. Anyone know if I can just install through Windows, i.e., while running my existing Win 7 installation via VMware, or do I have to go through the whole clean install via Bootcamp routine?
I have an eMac (the 1GHz USB 2.0 educational model) and retail copies of OS 10.3 and 9.1. OS 10.3 is installed, and I would like to install the Classic Mac Environment using my retail copy of OS9, but I can't figure out how to get it to work. The machine won't boot from the OS9 cd, and when I run the installer in Panther, it stops with a message that I need to update OS9, but cannot unless the drive is writable (which it isn't, because it's a cd). Is there a way to get OS9 onto my HDD so that I can actually update it, or do I need to buy another copy of OS9 to get this to work?
Info: eMac (usb 2.0), Mac OS X (10.3.x), 1GHz educational model
I have a nvidia white macbook turning up in a few days, it's missing it's hard disk and install disks so I will need to use a retail edition of leopard.
I would like to know if there are any issues with doing so. Are the nvidia macbooks running a newer build of leopard?
I'm sending my 13" MBP in to Apple to have a minor mechanical issue repaired and so I'm installing a fresh copy of 10.5 just for security reasons. Yeah I know, paranoid maybe, but whatever. I have a time machine backup so it's really no sweat off my back. In any case, I thought I'd just use my retail 10.5 disc, but it gave me a bunch of grief. When the computer would boot up with the disc it would just go to a gray screen and sit there.
You'd hear the CD spin up and then stop and it just sat at the gray screen. I tried holding down 'option' before the full boot and it found the CD, but when you clicked it it would just freeze. I just put in the Leopard install disc that came with the computer and it's installing just fine. I guess I'm not too worried since I have the disc that came with the computer and I'll be getting Snow Leopard as well, but it'd be nice to know my retail 10.5 disc would work regardless.
I previously purchased iWork 09 with the Family Pack license. I did so by first downloading the trial version, then purchasing the license through the app. So, I never had a DVD for the app to use for installing it. I added it to my second mac by downloading the trial version to it, and then entering my license number. I never added it to my 3rd mac. I have now upgraded all 3 macs to Lion, and need to add iWork 09 to the third. How can I get iWork 09 on my Mac with Lion without buying it from the Mac App store? They have taken down / disabled the trial link and now point everyone to the App store so the old option is no longer available to me.
I need to buy an install disc for my IbookG4. How can I determine whether my tiger 10.4 is a 10.4.2 or 10.4.6 or 10.4.11 etc? I don't have the owners manual.
I upgraded an iMac G5 to Tiger. Safari crashes often and does not support many new web sites, particularly those requiring Flash. I have tried Opera and Camino both of which have problems when Flash is required.
I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I still have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs. So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.
I copied the os 9 classic from my g3 desktop to my iBook. When I Open the application it get all the way to the end and then the program shuts down got an ideas to solve that problem.
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
I have a iBook G3 laptop that has a new hard drive that has been formatted. I can't boot my Tiger DVD off the iBook when pressing the letter C. I receive a blinking folder icon. When I hook a firewire cable from the iBook to my Mac Pro running Leopard I can boot off the DVD. After I click on English as my language I receive a dialogue box stating I can't install Tiger on my Mac Pro. When I go to Disk Utility it does see the formatted new hard drive. I want to get Tiger on the new hard drive.
Im fairly new to the Mac world and I recently got my boyfriend's Ibook G4 version 10.4.11 (Tiger?)
I looked up how to reset it to factory default settings and once I did that, every application was gone. Even safari. I have been looking up ways to get it back onto the computer because I cant do anything on it now. I tried using a USB and putting a version of Safari (the .dmg file) that I thought would work on it, but when i try to open it, an error pops up. I dont know what to do.
I have a G3 iBook, 600MHz, 2 USB slots, 1 firewire slot, DVD ROM/CDRW with 640Mb. I bought a Tiger DVD which on the front says: "Mac OS X Tiger. Includes Xcode 2. Install DVD. Version 10.4.6." It came as new, inside a Mac OS X box (no grey installation discs - just 1 black DVD). But...it won't install on my iBook. In fact, it won't even mount on my desktop! I've tried holding "C" on startup but that won't help. Incidentally, I can't repair permissions (I just get "No valid packages (-9997)") but that seems to be the only thing going on with my Mac! Any ideas to get this show on the road?
my ibook 800mhz g3 isn't booting up. I just turned it on one day & it showed the apple logo as usual, it went to the Starting up screen, and then it just disappears and i'm left with a blue screen, and the mouse sometimes appears for about 10 seconds and then it goes away. i've tried formatting, installing an earlier operating system, using a boot cd, booting from an external hard drive, everything.
I've got a ibook 1.2 ghz w/ 1.25 gigs of ram. I'm going to be using it for school. Just some word processing, email/internet, and music. It came with panther and it has the latest updates.. Is it worth it to get Tiger for it? Will I notice a huge difference? Things are alright now, but I'm used to my MBP zipping through everything. I know it won't ever be as zippy as the MBP, but will Tiger make a huge difference?
I've got an old Ibook G4 with Panther and Ilife installed - I want to update to Tiger but keep Ilife - I have a retail copy of Tiger that doesn't include Ilife... What is the cleanest way for me to install Tiger and keep Ilife ?
