Suddenly I'm not able to open any MS Word 2004 docs because I keep getting the message "There is not enough memory or disk space to run the converter EPS Import". There is over 78 GB (out of 148) of memory left on the HD and I haven't installed or changed anything at all. I've done a Disk Verification in Utilities (grasping at straws?) and all is well. I'm working with Mac OS X 10.4.11 and MS Word 2004.
View 3 RepliesSuddenly today I can't save my Word docs. An error message comes up along the lines of check your network connection. This strikes me as a bizarre messge for this programme.
Info:
MacBook Pro
When I try to open a Word document I receive the following message "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example, /)."
Info:
MacBook Pro, OS X Mavericks (10.9.1), 2 GB DDR2 SDRAM
how do i delete word and excel files i no longer need? i have tried to highlight and press delete and i have tried the drag and drop and that hasn't worked for me either?
Info:
iMac (21.5-inch Mid 2011), iOS 5.1
How can I get into a Password Protected Word file which I have forgotten.
View 1 Replies View RelatedThis didnt use to happen but now when I open Word or Excel it seems to want to open all the recent Docs that I have worked on as well?
Looked at all the preferences and cant find anything to turn this off or work out why it is doing this now when it didnt use to?
Info:
Mac OS X (10.6.5)
I downloaded Lion onto my Mac, and now cannot open or access any of my Microsoft word documents or Power Points. Is there a fix for this? I need my documents.
View 4 Replies View RelatedI have some MS word documents on my MacBook (intel) that I'd like to transfer to my white iBook. I tried plugging an enternal HD into the iBook (that HD contained the docs) but the iBook said that the HD wasn't compatible with it. So I went back on my MacBook and transfered the files from the HD to a memory stick.
However when I plugged that in and tried to open the files, MS word opened but the file did not. The word files are Word 2007 and on the iBook is an older OS9 version of Word. The iBook has Mac OSX panther on it, but the MS word opens in "classic mode". Any ideas on how I can get the docs to open on the iBook?
When I try to save a document I get the following error message no matter how simple the document name, even if it is one letter:
This is not a valid file name.
Try one or more of the following:
* Check the path to make sure it was typed correctly.
* Select a file from the list of files and folders.
iMac
27-ince, Mid 2011
Processor 3.1 GHz Intel Core i5
Memory 4 GB 1333 MHZ DDR3
Graphics AMD Radeon HD 6970M 1024 MB
OS X 10.8.5(12F45)
Microsoft Word for Mac 2011
Version 14.4.4 (140809)
Info:
iMac, OS X Mountain Lion (10.8.5)
Since I updated the latest software on 2/2/12, Office For Mac doesn't work correctly. I can not open Excel or Word documents from Office. I cannot save a newly created document. However, I can open an exsisting document by going to the hard drive and double clicking the document I need. I can't save changes I make to the document once opened.
Info:
iMac, Mac OS X (10.6.8)
I have hundreds of Microsoft WORD docs, and just updated to Lion. I am informed they are no longer supported. What is the easiest way to bring them up through Pages?
Info:
MacBook Pro, Mac OS X (10.4.1)
get video recorded from my cell phone (motoroala Hint) imported into imovie so I can edit the video and merge clips. The file extension of the video file is .3g2 . Quicktime will play this video, but imovie apparently does not support it. I have found a number of different video apps by searching forums (iskysoft imedia converter, handbreak, mpeg streamclip, applemacsoft video converter) of which only iskysoft imedia converter does what I want to do. The only problem is the trial version does not convert audio and has "evaluation copy" imprinted into the video. The full version costs $50
View 3 Replies View RelatedI run Microsoft Office on my MacBook Pro. I routinely "print" Word documents to .pdf files. My conversions to .pdf are now resulting in two .pdf documents rather than one multipage document. For example, a two page Word document about puppies would be converted Puppies and Puppies.2 rather than just one 2-page .pdf file. A 14-page file just also saved as two separate .pdf files; the first was only one page, and the second contained the other 13 pages. This is a new problem as of tonight; I've never previously had any difficulty. It's quite frustrating, and I can't seem to determine the cause.
Info:
MacBook Pro, Mac OS X (10.6.8)
My dad was saving a bunch of Word docs on his Mac - he had one large file that he split up into twenty-some smaller files, which he then saved onto both his desktop and on a flash drive. Somehow along the way (neither he nor I had any clue how) but 4 of those files saved as an alias that point to nowhere. In other words, I can't find the originals anywhere on his computer or flash drives.
Even stranger is that one of those files aliased to the Applications folder. Keep in mind these are all supposed to be word documents. They all still end with .doc, but their type is an alias. I have no clue how they were created as an alias, but they were. It's probably a longshot without knowing where the original is located, but do any of you guys know how to possibly retrieve this?
I have a new iMac with MS Office for Mac 2011. When I go to finder and click on a document the computer opens all word docs. How do i stop this behavior?
Info:
iMac, Mac OS X (10.7.3)
I have recently started using iWork more and more often. It works very well for me and opens word files very well. But on some files which are made using a new office 08 font, i get font errors.
Is there a way to import the Office 08 fonts into Pages? I looked in /Library/Fonts/Microsoft/ but there weren't any font's there.
I have been using evernote and dont know how to import microsoft word documents
Info:
MacBook Pro
Recently Aperture has a problem reading all the photos on my 4GB Sandisk memory cards (2 cards, same problem).
When importing pictures from Aperture (RAW) - it only reads about 10 pictures, displays the thumbnail and then stops reading from the card (when there is still hundreds more pictures to be imported).
What I have to do is import with iPhoto and then drag them into Aperture. This is a pain though. I happens on both my memory cards and is a recent thing. It used to work.
iPhoto reads the memory cards in the camera very quickly, but Aperture consistently fails on more than one memory card which leads me to exclude the cards as the point of failure.
Aperture 2.1.4
Canon 40D
Sandisk Extreme III 4GB
As always I wanted to add a new project with incrementally new RAW files from my SD memory card. I have the photo management system the image master files (RAWS) are stored in Pictures folder on the HDD. The import dialogue enables to select a destination folder to Pictures as usual, but it doesn't show Move or Copy files option anymore. Without this, it just imports images as referenced images to the ones placed on the memory card, which I subsequently can't format, because, I'd lost all the photos. Move or Copy files option shows up when I pick other import source than memory card, eg. my HDD. I tried everything, can't figure this out. I find Aperture unreliable now and will move to Adobe Lightroom, if won't find a solution.
Info:
Mid-2009 Macbook Pro running Mavericks 10.9.3, Aperture 3.5.1
Now that Apple have taken over our house with ipads, iphones, ipods etc , I decided to give my Dell laptop to the kids and bought a 13inch Macbook Pro and have installed Office 2011
The problem I have is with my memory stick Kingston DT Locker which I also use on Windows XP and Windows 7 - I cannot open or save Excel (xls and xlsx) and Word files (doc and docx) from/to the drive
I can copy files to the Mac, update them and then copy back to the drive
I can open pdf and jpeg files It is formatted to FAT32
Info:
MacBook Pro
I have word documents whihc suddenly will not opn.. it says not enuf memroy or disk space and there is plenty of space on the hardrive!
View 1 Replies View RelatedI want to import photos from my Sony memory stick pro duo to iMac. My imac has SD card reader but not sure whether it reads photos from memory stick pro..
i bought this iMac in May 2011. I believe this model doesn't support Memory stick pro.
Info:
iMac (21.5-inch Mid 2011)
Since upgrading to Snow Leopard, I can no longer import P2 footage. I get the stop sign and error: no data.In the import window I can play the clip and everything is fine, but when I add to the clip to the import queue it just times out.
Any thoughts? Is it somehow related to Quicktime being updated by Snow Leopard?
Information:
Macbook Pro
Mac OS X (10.6.1)
Final Cut 5.1
I recently purchased an MP3 album from Amazon, which downloaded fine. Unlike previous times, however, the Amazon Downloader app didn't load the music into my iTunes library. I tried to manually add the album to my iTunes Library, with no luck. I was able to load the album into my iPhone Music app by dragging and dropping on my iPhone device in iTunes (after turning off iTunes Match).. If I double-click on the songs on my hard drive, they will play in iTunes, but do not import.
I am running Mac OS 10.7.3, iTunes 10.6.1 (7) and have iTunes Match active on my computer.
Info:
Mac OS X (10.7.3)
I don't see "import from imovie" under file/import
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.3)
Macbook Pro (2014) when I work with Microsoft office, Word, and use the "command v" keys the entire Word doc freezes and I need to reboot entire computer. What is this?
View 1 Replies View RelatedI start Microsoft Entourage, the software opens at least 17 windows and sometimes more.When I click on the upper section of a window in Safari, or Word, the window folds to the dock and when I click on a word, the entire word is selected.
View 3 Replies View RelatedI have word documents that were created in windows with a Garrison Cond. Sans Font. When I open the documents in mac word, it changes the font.
Info:
MacBook
Pro, Mac OS X (10.7.3)
I have a Mac OS X version 10.5.7 i am working on Word 2008 for Mac, version 12.0.1 (080305).
My problem, i created one text box in a document, somehow 2 more appeared. I made the mistake of thinking that to delete the extra text boxes, i simply highlight them and delete them. Silly stupid me, nothing that simple exists and i have wasted an hour trying to figure it out. The help button does squat, barely gives you any info on a text box much less trying to delete it. Does anyone know how to delete a text box in a word document?
i'm looking at moving over to the Mac in a couple days and i just need to know the best free Word Processor that can open .doc files. 99% of my docs made in Word are of the 97-2003 variety and not 2007's .docx.
View 14 Replies View Related