I'm trying to replace an exact version of this, but it seems this specific model (320GB if possible) is from eastern Europe somewhere? Any help locating an online store (in English) I can buy from?
View 2 RepliesA little while ago I build my own SATA drive using an enclosure from Addonics, and two 750GB Seagate drives. I had it connected with eSata to my Mac Book Pro 2.0 Core Duo, and using RAID 1 mirroring. The eSata card is a Wiebetech Express 34 card. Everything had been working fine and dandy, until one day I plugged the enclosure in, and I suddenly got the grey screen of death telling me to shut down my computer. After restarting, I tried plugging the drives in again, only to get the same thing. So after all manner of switching cables, eSata cards, and reinstalling drivers, I still had the same result. So I tried something else - I took out one of the Seagate drives and threw it in a Firewire 400 single enclosure made by Acomdata. After turning that drive on, I still got the same error message. I tried the other mirrored drive, and again, the same grey screen of death. So at this point I wondering if both my drives, with the exact same data on them, are completely corrupt. Neither one of them is making that terrible clicking sound that seems to happen to dying drives. But I can't fathom what happened to both drives that would cause such an error. I created a mirrored setup for the exact reason that if one drive failed, surely I would have the other one left. Can anyone shed some light on this situation? I am totally prepared to pay for data recovery on these drives, but it would really help to know what I'm dealing with here.
View 1 Replies View RelatedI have never backed up my Macbook 2.1 duo before yesterday. While in the process of backing up I was using photoshop, and my computer froze. I waited 30 min and then decided to shut it down. When I tried to turn it on it will not boot-up, I only get the grey screen of death. I had just recently upgraded to Snow Leopard this week. I used an external DVD drive which seemed to cause issues. So I thought I might be able to use that to install a clean version on this busted drive, well nothing worked, tried holding option key, holding down the C key. I ordered another drive that says its compatible with my drive. Since the my mac doesnt seem to acknowledge my drive, I bought an external housing for my new internal. I want to format and load Snow leopard onto the new hard drive using my girl friends mac. then put in my macbook. I would like to know if this will work? how I need to format my drive in disk utility.. Is it possible that it is not my Hard Drive?
Another side note, I just upgraded my RAM from 1GB to 4GB on my Macbook 2.1, I did try and putting my old ram back in just incase that was the issue.
Info:
MacBook, iOS 6, 2.1 13" intel duo
Unfortunately I bumped the switch on the power strip that my Mac Mini (1.42ghz G4, OS X 10.3) is plugged into while it was running. Now it won't boot up. All I get is the gray screen with the gray apple logo and the spinning wheel but no OSX.
View 14 Replies View RelatedI think the hard drive in my Macbook (2007 Model) has died. My macbook froze and when I restarted I can hear an usual clicking noise and I only get a white screen with a grey folder icon and white question mark inside. Fortunately, I use super dooper to create a bootable clone of my hard drive as a back up. When I attach this and hold down the apple key I boot straight into the clone and the computer runs fine from the external hard drive. If I go to disk utility my computer can not locate the internal hard drive, nor if I go t sysyem prefs-startup disk. Should I assume its dead or could it be a connection problem. I don't have applecare so I'm willing to buy a new hard drive and swap it myself. However, this is making the assumption the hard drive is the culprit. Can anyone else diagnose this problem from the desrcitpion before I shell out on a new hard drive?
View 8 Replies View RelatedI have a mid-2011 iMac (with Mavericks OS), and am doing a clean install before giving my computer to a relative. I performed a secure erase of my entire harddrive (using disk utility), reset the NVRAM / PRAM (but it only chimes once even after I tried several times), and now I get the grey screen even when I try to boot from CD, safe boot, or any other commands. I can't even get back into the disk utility.
On a side note, I have the install DVD in the DVD drive and I can't get that out.
Info:
iMac, OS X Mavericks (10.9)
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies View Relatedmy mac has a pioneer dvd drive in it and it wont read my dvd+r dl and I am wanting to burn a mac os 10.5.dmg to it and install 10.5 but the dang thing is ejecting it. So what should I do to get it to work get the external dvd and run it from it or get a external hard drive and try it that way.
View 6 Replies View RelatedI have recently bought a MacBook Pro (10.9.4) with a 128 Gb solid state drive. My intended backup strategy is to have all my documents on an external 1 Tb USB3 drive (i.e, not in the MacBook Pro) and to back up that drive AND my Macbook (system, applications, mail etc) to another, powered 2Tb drive. I’m assuming I’ll have to partition the 2Tb drive first, by the way.
Info:
MacBook Pro, OS X Mavericks (10.9.4), 2.9 Ghz Intel Core i7
if you'd be so kind...I've had my iMac for almost a year, but have yet to make the big switch totally.
I am getting an external drive today to store music, photos, etc. Simply enough to set them up and have items go directly to it instead of internal drive? I know it is, just want peace of mind
MY big ?...I have lots of music on itunes on my pc...can I take it off the pc and out onto the external to use with my imac? Still have to do two separate partitions, or? Or, easier to get all my music onto ipod, then use Expod to download to the external? Once it is all on the external, how do I call it up, easily? itunes automatically search to play music from it and save new music to the external or do I have set it up or assign things differently?
In other words... I have moved my music library to the external hard drive, as per an earlier thread I read here on the forums. It worked like quite well. Now that it is working perfectly, I am having a hard time leaving well enough alone. It is never a good idea for me to think too much...Can itunes be installed and run on/from an external hard drive? If so, how?
View 15 Replies View Relateda G_TECH external 500 that is not being acknowledged on the hard drive (I see it on Disc Utility but cannot access anything on it and it will not show up in my finder) I tried to click Repair Dick but it shows this message in red:keys out of orderI then tried to verify it (granted I really do not know what repair or verify would do ...) and it said it was unable to read it.I assume (but could be wrong) that since I can see that my hard drive exists in disc utility there IS a way to take the contents from that disc and save them to a different external.I have a WD passport and would like to drop the contents of the G-tech onto the WD so i can then wipe the G-Tech and fix it
View 2 Replies View RelatedI've not Time Machine'd in about 3 weeks. After working fine for several months, out of the blue I get this error. I think it was -61? "Get Info" said it was read only. I couldn't figure out how to make it write & read. Now, out of the blue, I can't even mount it.I'm at a loss. My iMac is on it's last legs and I'm playing with fire. I guess the first order of business is to mount the thing but it just does nothing or IDK how to force it to do this?
View 16 Replies View RelatedThis is what im trying to do. I have a macbook with 120gb hard drive. thats not enough space from my music collection. So i was wondering how to make itunes run off a external hard drive. I looked around and found was for a PC.
View 2 Replies View RelatedI recently bought a macbook pro and am making the transition from a pc to mac. It's all gone well so far, but I'm not sure what to do with my music. I currently have about 200 gb of music on my external hard drive (connected to my pc.) The internal hard drive on my pc does not have space to accomodate the files on my external.
I do not have the "Copy files to iTunes music folder" currently enabled because my internal doesn't have space. (And I like having the original music files in a separate location as I have over 30,000 songs). I don't know how to transfer my external and music to my macbook, since I will have to reformat the drive (which would erase everything on it, therefore I somehow have to make a backup either on my mac or on my pc. but what to do about the iTunes .xml file and iTunes folder on the internal pc drive??).
I have an elderly Q950 with an external hard drive with everything backed up onto it. The external drive is a Micronet ADV1000E, with a sticker on the back saying it's Macintosh or PC compatible. I also have an iBook laptop, & PC Dell Inspiron 1300 laptop. As I have the 2 laptops, the Quadra hadn't been switched on for maybe one year. On the weekend I tried to get it to boot up (with & without the external drive switched on), but all it does is display a grey screen with an image of a 3.5" disk with a '?' in the middle. If I start up from a Norton 3.5" disk it still can't find the external or internal drive. If I try booting up with my finger in the shift key it doesn't want to know.
1. Any idea why the Quadra isn't seeing either the external or internal drive & what can I try to do?
2. Is there any way I can connect my external drive to either my iBook or Dell? At the moment I have no cables to connect the old & new - are cables available & if so any idea where from? I've looked high & low but so far no joy.
3. Is it possible to remove the hard drive from the Quadra or the external drive & put in an external drive enclosure, then connect that to either laptop? I see there are drive enclosures available which are Mac & pc compatible. This by the way would be a major undertaking for me. I'm by no means a computer dunce but would be wary of trying it.
when I went into the "get info" window for the G-Drive and switched the ownership/permissions dropdown from "read/write" to "no access". When I tried to switch it back to read/write, it would say read/write in the dropdown, but then I'd try to access the g-drive and I'd only get to the first set of folders--when I'd click on a folder, there would appear to be nothing in it. (Not sure if this is really related to my current problem.)
I then tried ejecting and remounting the drive, but it didn't show up on my desktop. Stupidly, I assumed my computer didn't recognize it at all and unplugged the firewire without ejecting thru disk utility. When I did this I got the device removal error.
I then plugged the firewire back in and tried repairing the disk in disk utility, but it said it didn't need repair. When I click on the G-Drive in disk utility the info at the bottom says:
Mount Point :/Volumes/G-DRIVECapacity :465.6 GB (499,973,603,328 Bytes)
Format :Mac OS ExtendedAvailable :
Owners Enabled :NoUsed :
Number of Folders :0Number of Files :0
0 Files! I'm worried about losing all my stuff! I then tried DiskWarrior (v4.0). When I first opened it I think the info at the bottom said "This disk is a Mac OS Extended disk. This disk does NOT appear on the desktop." I'm not quite sure about that "not" b/c after rebuilding the directory of the G-DRIVE I know it now says "This disk does appear on the desktop." Anyway, it's definitely not appearing on my desktop. After building the directory it said "All file and folder data was easily located. Comparison of the original and replacement directories indicate that there will be changes to the number, the contents and/or the attributes of the files and folders." And later: "19 files (and 2 folders) had a directory entry w/ an incorrect text encoding value that was repaired." And:
Disk Info:
Files: 51,646
Folders: 18, 493
Free Space: 65.42GB
(etc)
I then clicked "Replace" whereupon it said it was successfully replace. But still it did not appear on the desktop even after ejecting, remounting, rebooting computer, etc.
If anyone has any advice I'd really appreciate it. I'm pretty desperate here! Thanks!
(FYI I already tried going into the Finder permissions and unclicking and reclicking the box for showing disks on the desktop. Also, I plan on getting DataRescueII in case that's necessary, but i hope it isn't)
I've got an external drive that was a Time Machine backup drive. It's at the police station as evidence for something and they will not let me take it back. However, they will let me come down and make a copy of it. I might only have one shot at this so I'm trying to think of the best way to do it successfully and quickly.
Can I just bring another external with me, my Macbook, and then copy the files from the Time Machine backup external drive to the other external drive? If so, what is the facility for doing this quickly? I'm kind of new at Macs and am unsure. I do not have an extra Mac that I can simply use Time Machine to restore to to replace it's contents.
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
My internal 1TB hard drive on my iMac is dead and I don't have the money to replace it at the moment. I have everything backed up on an external 1TB drive using Time Machine. As a workaround for the time being,Is there any way I can install the system on the external drive and use that as the boot drive without erasing the Time Machine Backups? It seems to me I would have to have two partitions for the external drive, one for the system, and one for Time Machine. But is there any way to add a partition without erasing the existing one with Time Machine only on it?
View 8 Replies View RelatedSo I bought a 2tb external drive to save space on my main drive - I copied all my movies and have been dropping a bunch of mini dv tapes onto it - but when I open the drive none of them show up
When I get info in disk utility I get one that shows I have avaialble 1.99TB of 2 TB - and right below it says 890 MB are used - don't get it
Tried the disk utility and it says they are working fine .... repair did not seem to do anything
Info:
iMac, Mac OS X (10.6.8)
I was using Mail I have set up my email again, so I don't want to lose anything currently in my inbox, but want to retrieve old messages and addresses. Running 10.6.8 OS.
Info:
iMac (27-inch Late 2009), Mac OS X (10.6.8)
I would like to use FileVault to encrypt both my hard drive and time machine back up external drive. Does encryption noticeable slow down the computer.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
When I eventually upgrade to Snow Leopard, I'd ideally like to do a fresh install (I did Tiger>Leopard as an upgrade install), but I really don't want to have to go through the hassle of reinstalling all my apps afterwards. So, would the following work as a best-of-both-worlds alternative?
1. Update my backup bootable system drive image on my external FW drive
2. Wipe the drive in my MBP and do a fresh install of SL
3. Use the Migration Assistant to automagically copy all my data and apps over from the backup drive as if I was upgrading from an old Mac to a new one
On paper at least, it looks like it ought to "just work"... but I'm wondering whether or not Migration Assistant will work between a Mac and an external drive, or does it have to be between two actual Macs?
I bought leopard family pack to update the operating system on my intel macbook and g4 733 tower, the problem being that my tower does not have a dvd drive. Is there anyway to use the macbook as an external dvd drive to install leopard which is currently running 10.3.9?
View 2 Replies View RelatedCan bootcamp be done on an external drive? In order to save space on the internal drive.
View 1 Replies View RelatedI want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
I just bought a 640gig Samsung 2.5 inch / 5400rpm drive and threw it in a FW800 case from Other world computing. Running some test using the QuickBench 4 and AJA system test shows me that this little bugger is almost as quick as my internal drive on my MacBook Pro (Model number: WDC WD6400BEVT-00A0RT0). How can this be???? I did a varity of test with different file sizes and the Samsung get 70 MB/s vs about 84 MB/s for the internal drive.
My internal drive is pretty full vs this external drive that is currently empty. I do a lot of video work / large gigabyte files on the drive so perhaps I have a defrag problem? I really expected my internal drive to blow the FW800 connected Samsung out the water?
Lately I've been using my external hard drive as the main drive of my imac I5 and every day it freezes when I open 3 or 4 apps or more or while doing several stuff at the same time. This, obviously, doesnt happen when using the internal hard drive of the imac, so I suppose is due to using firewire 800 or usb 2.0. Is it normal for every external hard drive to freeze when using it as the main drive or maybe is it that my external hard drive is bad?
I'm planning on buying a more quieter external hard drive to use as the main drive of my imac, but I wont do so if it also keeps freezing every day. Any suggestions? Is it normal even when using firewire 800? When using the external hard drive I umount the internal drive of the imac. Maybe this is the reason? Its a Lacie Big Disk 500GB. Would an external SSD make a difference or would it still freeze?
