OS X :: Unable To Find Way To Stop Indexing External Drive
Feb 20, 2010
I just added a 1 Terabyte drive for both backup and regular file storage. I partioned the drive so I would have a volume purely for backup. Backing up to the drive was taking forever, i searched and found index is the problem. I also found a couple ways to stop indexing. I utilized the touch function, but the .metadata_never_index doesn't seem to take at all. I have since utilized the sudo mdutil function for just the backup volume and this works. However..... Will this permanently leave indexing off on this volume? The drive backs up my laptop so it's disconnected frequently. Also does anyone have a guess to why the never index function didn't work? The syntax looked to be perfect.
touch /Volumes/Obsidianice Backup/.metadata_never_index
Whenever i ran the ls function
ls -a /Volumes/Obsidianice Backup
to check it it returned
No such file or directory
View 5 Replies
ADVERTISEMENT
Jan 17, 2008
Is there a way to stop Spotlight indexing everytime I restart?
I use Bootcamp so I'm constantly swapping from Leopard to Windows and when I get into leopard, Spotlight indexes and the computer is slow until it finishes.
View 6 Replies
View Related
Jun 1, 2007
I use Carbon Copy Cloner to clone my internal HD to my External 3 times a week. I have CCC set to erase the external, and copy everything over each time it backs up. The only problem im having is I can't stop Spotlight from indexing/searching my external drive. Adding the drive to the Privacy tab in the Spotlight Prefs works, but only until the next backup, after the next backup, and a restart Spotlight indexes my External drive again. It's annoying cause when I search for files I get 2 of everything. How the heck do I stop spotlight from searching my external?
View 16 Replies
View Related
Feb 17, 2010
Whenever I add a new external drive (be it for regular use or just backup) the OS will read the entire drive to create an index. With smaller drives this was just an irritation of 20-30minutes ..but now I have a RAID5 with 4 2TB drives. This will be 4-5hours of non stop noise ?
Is there a better way to do this on a schedule ..say use the drive now and then set it for indexing over night ?
View 1 Replies
View Related
Jun 23, 2009
right, i have a HFS formatted 500gb external drive which i use everyday, but today spotlight just keeps indexing it, it has a lot of media on it which i access daily so spotlight is needed to search it.
i mean its been indexing for a good 2 hours.
View 10 Replies
View Related
Jan 13, 2010
Is there any way to pause or stop the spotlight that happens after rebooting? It annoying that it keeps me from using Spotlight until it was done, and recently I was trying to use EyeTV as a DRV, and the video kept freezing, I suspect due to spotlight in the background. It is very frustrating to not be able to fully use my computer for some time after rebooting.
I tried "sudo mdutil -i off" and it didn't seem to have any effect, although I didn't stop the mds process after trying it. I did try killing mds before entering that command, and it just came back after a few seconds.
View 5 Replies
View Related
Jul 25, 2009
a few weeks ago I used a maitenance software (like onyx). I changed something in the spotlight settings, which made it indexing... without stopping.
I have now reinstalled Mac OS X.. everything worked ok. I then updated it... and the problem popped up again.
View 9 Replies
View Related
Sep 26, 2009
I have a folder with everything from my old computer on it in Andrew/documents/old and i don't want quicksilver to add the files inside that folder to it's index. How do i stop it from doing so?
View 2 Replies
View Related
Mar 22, 2012
Spotlight has been indexing for four days now,; all it says is 'estimating indexing time.' Meanwhile, i can't search for anythign on my hard drive. how can i make it stop?
View 3 Replies
View Related
Apr 27, 2012
I can't figure out how to stop Spotlight indexing, as it's been doing it since yesterday.
Info:
Macbook 2.4Ghz (White) 4GB RAM, Mac OS X (10.6.4), Logic Studio 8, Safari 5.0.2, iLife 08, iWork 08, Aperture 2
View 8 Replies
View Related
Oct 27, 2009
I've had Snow Leopard since the day it came out. And I installed it that same day. Since then Spotlight is constantly indexing and will not stop. I noticed about a week after installation when I went to use stoplight and it wouldn't let me because it was indexing. Now fast forward to today I still haven't fixed this problem because I never really needed to use it. So no I have the need, and I need to fix this problem. BTW I'm using a 13" aluminum Mac Book bought around June '09 the model right before the current 13" aluminum Mac Book Pro's
View 4 Replies
View Related
Dec 13, 2007
We are working via Xserve everyday. Sometimes, the performance can get very poor. Is there anyway to boot up the performance?
I am thinking of Indexing Xserve via a client workstation by using the mdutil command. I have the server mount on my desktop and everything is ready to go. But when i hit the command, i get an error saying "cannot set index on /volume/job"
View 2 Replies
View Related
Mar 25, 2010
I noticed my "spotlight" icon has a pulsing dot in the center of the magnifying glass icon....when I click on it there is a progress bar and it is perpetually "indexing" my hard drive.
Whats this mean? Is my HDD going to fail? Its been going on like this for months. Running Drive Utility, Techtool or Disk Warrior doesn't fix it.
I fixed permissions and repaired the disk off the Snow Leopard book disk, problem persists.
View 7 Replies
View Related
Oct 27, 2007
How can I tell if it is still indexing and how long does it take ona clean and jerk install that wipes the HD ? I was experiencing VERY choppy genie efects and dock animations for about 2 hours after the install of Leopard.... oddly seems to come and go WTF
MBP BRAND NEW 2.2
View 3 Replies
View Related
Jun 26, 2009
I have a mac pro running Leopard with Time Machine backup on an external 500GB FREECOM drive. My issue is that I cannot boot my mac while the drive is connect, because it seems it tries to boot from the external drive and it starts displaying a flashing folder with a question mark in it. So everytime I need to fire up my machine, I need to disconnect the external drive > boot > connect the external drive.
View 7 Replies
View Related
Sep 13, 2010
My Spotlight doesn't seem to be working properly. It has been indexing for the past couple of weeks and is clearly stuck. It actually says that it is 'estimating indexing time' but hasn't been able to move on from this.
Time Machine has also stopped backing up, and I think that this may be a linked issue.
I'm running 10.6.4 on a MacBook Intel 2.4GHz with 2G RAM
View 7 Replies
View Related
Apr 27, 2010
I got a 500GB WD external disk for my MBP 2.2GHZ/2GB/500GB which with up-dated Snow Leopard and Windows XP pro(Boot camp). Here's wot happened and my probs:Last Tuesday I used the external disk with no problem. But on Friday the external disk is unable to be founded by MBP either in Disk Utility or Finder. I tried to switch to Windows XP where I installed MacDrive to read Mac partition under windows. The system says it cannt install the disk coz device unrecognizable. First I suspect it 's the problem with external disk enclosure but when I replaced it with another new one, problem stay still.
So here's some questions, First, is there any instruction I can take to solve the issue, or if the disk unfortunately crashed any possible chance I can rescue the data (My vital working data achieve is inside) using application or else.
View 2 Replies
View Related
Mar 29, 2012
Since I upgrade to Lion my external drives are not been indexed. I can't search anything there.
I already tryed:
mdutil -i on /Volume/NameOfExternalDrive
and
Add and remove my external drive from Spotlight Privacy tab
Looks like indexing is active but I can find just a few files.
There are a way to force Lion to re-indexing thet drive? Better: without use terminal?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
View 10 Replies
View Related
Apr 24, 2009
how can I tell if spotlight has indexed main hd? Also, does it index my 2 external hds; one is a Maxtor 1 teribyte hd-other is a 500g.
OSX.5.6-Macpro Work station-320g hd-2.8 ghz-10gig ram.----------
Dickster------------
View 2 Replies
View Related
Apr 30, 2012
I am unable to find any results in spot light search from my external hard disk. is there any way to index the files on my external hard disk?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.3)
View 6 Replies
View Related
Dec 7, 2010
I have a brand new MBP. I have a 1tb external drive with 250gb's of music. I have it attached to my mac via USB. I CANNOT GET ITUNES TO CREATE A NEW LIBRARY ON THE EXTERNAL DRIVE. I CANNOT DRAG AND DROP OR ADD FILE/FOLDER.
But get this, I hook it up to my old Dell and I can do whatever I want. I am friggin pissed that I spent all this money on Mac equip and can't get it going. You may have seen my other post where I posed my issue of: 1tb ethernet drive hooked to airport extreme. Above mentioned 1tb hooked up to back of it via usb. I am completely unable to copy, move, or add files using my mac. But guess what. my pc handles it easily and quickly.
View 5 Replies
View Related
Aug 28, 2009
I just have a really quick question. I ordered the maxupgrades optibay solution which comes in today. I need that extra HDD for bootcamp. Here's my question, can I just run by best buy and pick up any external dvd drive that is USB and use it?
View 4 Replies
View Related
Mar 2, 2009
I wondering if anyone knows of a problem that will index my external hard drive and burned DVDs so that I can search/browse their contents even when I don't have them mounted on my Mac. I'm in the process of archive a lot of old work and I know at one point I saw a program that would index CDs and DVDs, but I can't remember the name and searching hasn't turned anything up yet.
View 1 Replies
View Related
Jul 29, 2007
Have been using Bootcamp, but decided to give VMWare a try - So far I like it
(Nice not having to reboot everytime)
Is there any way to get VMWare XP to find and be able to read/write to an external firewire hard drive ?
View 8 Replies
View Related
May 19, 2009
I have and Maxtor touch one III. I have installed the software update for mac OS, but it still wont find my hard drive. Its not mac format, but its FAT32 and I heard that worked as well. I can try to format it to mac format, but there is still some data on it that I want.
View 7 Replies
View Related
Aug 11, 2009
After the latest Leopard update, my imac can not find one of the external hard drives attached to it via usb. I have check all the usb ports with other devices with no problems. I checked the external hard drive on another computer and had no problems reading it.
View 2 Replies
View Related
Jun 13, 2010
I recently bought a macbook pro and am making the transition from a pc to mac. It's all gone well so far, but I'm not sure what to do with my music. I currently have about 200 gb of music on my external hard drive (connected to my pc.) The internal hard drive on my pc does not have space to accomodate the files on my external.
I do not have the "Copy files to iTunes music folder" currently enabled because my internal doesn't have space. (And I like having the original music files in a separate location as I have over 30,000 songs). I don't know how to transfer my external and music to my macbook, since I will have to reformat the drive (which would erase everything on it, therefore I somehow have to make a backup either on my mac or on my pc. but what to do about the iTunes .xml file and iTunes folder on the internal pc drive??).
View 1 Replies
View Related
Nov 22, 2008
I have an iomega network drive on which I store my itunes library. However spotlight does not find any files on this drive.
I have tried mdutil -i on /Volumes/Network drive and mdutil -E
It says it has turned on indexing, but it still will not find any files. Does anyone know how to make spotlight index this network drive, or recommend an app that will allow me to search network drives
View 2 Replies
View Related
Apr 2, 2009
I upgraded my harddrive this weekend. Here is how I did it:
1.) replaced the hard drive in my laptop
2.) Loaded Leopard onto the new hard drive
3.) Connected my old drive in an enclosure as an external drive
4.) Used the migration assistant to migrate my profile and files from the old drive.
Everything is good, but spotlight doesn't work well. It misses tons of stuff that IS there. I think the drive needs to be re-indexed?
View 1 Replies
View Related
Apr 26, 2012
I'm using a my book western digital nas drive for my time machine backups and time machine has been stuck on indexing for days. I saw some solutions in other threads, however on the my book the backup partition of the drive is private, locked, or hidden? and I have no idea how to get into that area of the drive if I was going to apply any of the solution I have previously seen...
Info:
MacBook Air, Mac OS X (10.7.3)
View 11 Replies
View Related
