OS X :: USB Drive Format - Windows And Mac For Large Files (4GB+)?
Nov 22, 2009
I have an 8GB Toshiba TransMemory? U2M USB Flash Drive and I want it to work with both Windows and Mac. I know this can be accomplished by formatting FAT32, but I need to be able to load 5GB files. This of course eliminates FAT as an option. I know there is a format that works for this, because I used to do these transfers with this very drive (with the manufacturer's format). Up until I had to temporarily reformat the drive for a little project. Now I need to get this USB drive back to a format that works for me.
View 5 Replies
ADVERTISEMENT
Apr 17, 2012
How do I format an external USB Storage Drive to read Mac and Windows Files?
Info:
iMac, Mac OS X (10.7.3)
View 6 Replies
View Related
Dec 20, 2008
I am moving a few folders which are in excess of 4 gig each from one hard drive to another to try and free up space, of course I am aware that one is formatted for mac and the other is ms dos but I already have stuff on it and can't take it off in order to reformat it (or I do not want to). Is there a program that exist that will allow me to do this, I was only thinking in regard to programs such as Senuti for backing up an iPod. Since an iPod is so huge, you tell the program where to put the songs and regardless of the space it will do it, no questions asked. If you understand what I am on about can you please assist me in any other way in regard to solving me problem.
View 2 Replies
View Related
Nov 22, 2009
I've recently purchased a NAS drive and would now like to copy about 500 GB of files onto it. Obviously this is a slow process! Is there a way I can set up the copy so that if it gets interrupted I can resume the transfer? At the moment the I just know X of 100 GB has been transferred. On the destination drive you can't see any of the files being transferred across until the entire operation is complete (on a pc you can normally see the files that have been transferred immediately) ... I'm a bit worried that if I turn my laptop off or I have any network issues the transfer will fail..
View 2 Replies
View Related
Apr 2, 2008
I've had my Air for a couple of months now and very happy with it. However I've noticed if I copy a large about of data to it, lets say around 2gb from a USB or network drive it grinds to a halt. It would start off saying 10 minutes to copy, then get to about 800mb and slow down to about 24 hours to copy.
View 4 Replies
View Related
Sep 10, 2010
Got a slight problem transferring files from my Macbook Pro to my portable hard drive. My portable hard drive is partitioned into NTFS and FAT 32. The files are over 4gb big so ultimately I cant copy it to the FAT 32 partion and NTFS doesnt seem to work with mac books
View 1 Replies
View Related
Nov 8, 2009
I am trying to transfer a large file (~7GB) from my macbook pro to my external drive... but seems that I keep getting an error. If I try to drag and drop from my Mac drive to the folder of my external hard drive I keep getting this message: 'The operation can?t be completed because an unexpected error occurred (error code 0).' I tried to use a UNIX command with the Terminal $mv file.xxx /Volumes/HardDrive/ at first it seemed to work, but after a while I receive this message from the Terminal: 'File too large' I am now frustrated... I need to save this large file for backup purposes and my external hard drive is not big enough to be used for Time Machine (it has 80GB out of 160 of space left)
View 15 Replies
View Related
Mar 7, 2007
I have a 38gb iMovie file on my MacBook. I also have a 160gb external HDD. I want to copy the file across, sounds simple right? It will start copying happily but when it gets to about 8-10gb I get this error message (EVERY TIME!): Sorry, the operation could not be completed because an unexpected error has occurred (Error code -1309). I really do not want to delete this file as it is a wedding video I did for a friend only a few months ago. I am trying to copy across to a Freecom II drive using USB.
View 7 Replies
View Related
Jun 4, 2014
How do I copy files fromone external hard drive to another external hard drive via mac book air
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.3)
View 2 Replies
View Related
Apr 30, 2010
I'm trying to work out how to format my external hardrive so my MacBook Pro, Windows and PS3 can all have read and view access. If it can't be done can this be done: MacBook Pro: Read and View Access Windows: View Only Access PS3: View Only Access My external hardrive is WD 500gb Passport and i'm running Snow Leopard
View 7 Replies
View Related
Apr 15, 2009
At one point I reinstalled PS3, but now I have the problem again.I often have problems with large format files in PS3. It was working fine, but after a couple of hours it "unexpectedly quit....". I have relaunched, tossed preferences, etc. When I force quit, the PS3 icon in the dock still shows up with the dot and the Force Quit window shows up with no indication that there is a problem. When I try to reboot many times I have to use the power button on the mac. Finally i got PS3 to open...I opened up a different file and it worked fine, but the large format file tried to open and it came up with "Could not complete your request because of a program error." Photoshop locked up. Do my large file formats get corrupted for some reason?I have a MacPro, Dual-Core Intel Xeon, 2.66 GHZ, 2 processors, and 16G B memory...There should not be a memory problem with this machine. Why do I always have problems with a large format file?
View 3 Replies
View Related
May 8, 2012
Does anyone know if Apple plans to create a bluetooth version of the larger keyboard? I have the small, bluetooth version - but it's too cramped. I'd much prefer the larger one.
Info:
Mac Pro, Mac OS X (10.7)
View 1 Replies
View Related
Nov 3, 2008
I have an external drive that will need to be connected at different times to both my Mac (Leopard) and my Windows XP & Vista machines. I had it formatted for Mac OS (Journaled) but it wasn't readable in XP or Windows. So what is the best format so that all can read/write to it normally? NTFS? It needs to be able to handle larger files (4GB and bigger).
View 12 Replies
View Related
May 8, 2010
I bought a new 1TB external hard drive. What formats should I choose in Disk Utility to make this disc compatible with both Mac and Windows? I rarely have files over 2GB and my Mac is running on Snow Leopard.
View 4 Replies
View Related
Dec 8, 2014
I wish to format a hard drive for WAV audio files to be shared with a PC. How should I format the external hard drive?
Info:
iMac, OS X Mavericks (10.9.5)
View 3 Replies
View Related
Nov 7, 2009
I'm going to use a fast 300GB WD VelociRaptor HD in an e-SATA enclosure connected to my MBP via a Merax e-SATA Xpress XpressCard/34 for moving large audio file drum software during live play. I know FAT32 wont work because of it's 4gig file limitation and stability issues (file corruption). I could use the more modern and stable NTFS but that would require using something like NTFS-3G or Paragon to allow OSX to recognize it but I'm worried about slower performance going that route. Would using the OSX native HFS+ format give me the performance and large file size usage I need?
View 4 Replies
View Related
Sep 24, 2009
I wanted a larger Windows partition so I went into Boot Camp assistant and deleted the Windows partition, made a new one and proceeded to insert my Windows CD. It went through the installation process and i selected the right drive/partition to have a quick NTFS format. After the format, my MacBook restarted and stalled. Needless to say, Boot Camp ran a quick NTFS format on the entire drive.
Now, is there any way to recover any of the files that were quickly formatted? Is there any good software out there that may be able to recover anything?
View 3 Replies
View Related
Nov 5, 2009
I'm running Snow Leopard on my new Macbook Pro. I've got a 1.5TB External hard drive that I'm trying to figure out how to format in HFS+ with Apple Partition Map. I can figure out how to format in HFS using Disk Utility, however it still does it in GUID format and I do not know how to do it in Apple Partition Map.
Googleing this for hours has lead with all kinds of information on how to go to GUID FROM Apple Partition Map but not the other way around. I know GUID is the new hottness.. but this drive will be used exclusively to connect to my XBOX 360 and it supposedly only reads HFS+ when its formatted with Apple Partition Map. (I have tried it with Mac OS Extended (Journaled) with GUID, and the XBOX does NOT recognize it) I do not want to use Fat 32, (I know that that is the other major option) beacuse it limits file size.
View 1 Replies
View Related
Nov 2, 2010
I recently discovered, after running Disk Inventory X, some really fat files in my Library. I haven't touched them, as I read on another forum that it could be dangerous but is there anything I can do to get rid of them? I thought maybe they were left there after a recent Time Machine backup because I read that happening to someone else in another forum...
I've attached screenshots (I think) of the two biggest files.
View 3 Replies
View Related
Aug 18, 2008
I do a lot of work that involves advertising, photography, video editing, DVD authoring, photoshop and illustrator files. The illustrator vector files are fairly compressed but the photoshop raster files can be extremely large. Sometimes, I have someone wishing to send me a large portfolio folder, or I find I may want to send a big file to someone else. As an example, I recently had an artist send me a hi-res portfolio of his book covers to be made into a promotional DVD for comic-con. One of the CD's he sent me had the wrong pics on it, so I had to wait for the correct pics to be sent, which delayed the project several days. I can compress a single file for emailing, but can not drop the resolution as a way to minimize folder size if the file is going to be printed. I work predominantly on a mac, but many of my customers use windows based operating systems.
What is the best method for sending and receiving large digital files from a variety of customers? If I get an FTP site, can I keep one client from accessing someone else's folders? I noticed that Skype allows for file transfer... is VOIP practical for sending large files? This month's macworld made mention of a bit torrent program for such a chore. What about using a bit torrent program such as Transmission for creating a bit torrent folder for moving large files to a single customer? Are paid services available? Is a paid service the best choice? I am looking for a method that I can both send and receive these large files. It should be easy enough for a less than tech savvy customer to send me files after I give them a minimal explanation of how to do it. Preferably, it would involve no cost to a customer, and no need for them to install software.
View 8 Replies
View Related
Sep 30, 2010
I needed to make 40 dvd's. My burner is burnt out on my mac. I've created all the dvd's as iso files with iDVD. Now I need to transfer them to my PC that has a functioning burner. SOOOO... transferring 81.5 GB of data over a network will take days. Having said that, I'm using an unsecured network that drops out frequently. (I just moved in, it'll be weeks until the phone company can hook up my internet... we just had a hurricane and they're busy with repairs). Next idea, use a flash drive. Most of the iso files are bigger than 4Gb - so FAT32 is out. What's left?
which sounds promising, but once the files are split, how do I join them back together on my PC? Oh, and did I mention that this job is for a client and they're waiting on it. STRESS!!
View 12 Replies
View Related
Jul 23, 2007
What's the easiest way to merge together two fairly large AVI files, into one. Is this possible with any freeware?
View 16 Replies
View Related
Nov 22, 2009
Im trying to transfer extremely large files from one external hard drive to another, a La Cie to a WD. By large i mean 100-300GB. It starts to transfer and then says a file containg that name already exists. here is how it is setup La Cie(Content) --Firewire 800---->Macbook Pro---FireWire 400--> WD(empty)
im trying the drag and drop method. Am i doing something wrong is there a free program that can do this for me?
View 3 Replies
View Related
Dec 18, 2009
I have a brand new unibody macpro which came with 10.6. I am unable to print large files onto my HP z3200 (500 mb or greater) with Photoshop CS3. I can print the from LightRoom 2.5 with no problem but would far rather print from Photoshop. HP doesn't seem to have much of a clue about this.
View 3 Replies
View Related
Nov 8, 2008
I have large archive files from work (each ~10-20 GB) that we'd like to just backup onto DVDs and store in a safe. Obviously, each individual file is too big to fit on a DVD (even the double layer ones). Is there a "compress and split" sort of software that could be used for this?
View 3 Replies
View Related
May 16, 2009
I need to transfer some large iMovie project files (~30gb) from a Macbook Pro to a new Macbook, which has no firewire port. Can this be done easily?
View 5 Replies
View Related
Jan 27, 2010
I recorded a movie with isight-a very long one at that-around 3 hours. When I try to play back I receive error message "The movie is not in a format that QuickTime Player understands." How to play? I have Quicktime Player 10 running from Snow Leopard. Inside the folder for the event in imovie it shows the movie file but with a zero kb size. Also has an imovie cache folder.
View 1 Replies
View Related
Mar 14, 2010
I'm new to Mac and not sure how to do this. I have a several large (1.5GB each) iso files that are named like this: "filename.iso.0aa", "filename.iso.0ab", "filename.iso.0ac", etc. Is there any way to join these and burn them to DVDs? I've tried S&C but it doesn't work.
View 2 Replies
View Related
Mar 22, 2010
Do I need a special cord to transfer large files from one mac to another? Examples pictures etc... Can I just plug usb between the two and go? I really do not want to burn DVD or transfer to external HD....
View 2 Replies
View Related
Apr 30, 2010
I currently created a 13gb disk images with most of my stuff on it! What is the easiest/securest way to transport it from one location to another. Using an online backup service? Flash drive?
View 1 Replies
View Related
