I deleted my Time Machine backup and started again. But when I selected the newly blank drive to backup on i was told 504GB's was needed for the backup and i only had 495 free (Iomega 500GB HD). But my MBP's HDD is 500GB and has like 100GB's free? Whats this 104GB extra?
View 8 RepliesI've got an iMac with a 1TB harddrive and am trying to use a time machine set up to back up my harddrive. The external harddrive I'm using for my back up is also 1TB. I currently have about 135GB of free space on my iMac's harddrive and my external drive is completely empty. When I try to back up using time machine it tells me that the back up is 1.2TB and cannot fit on my 1TB external harddrive. What would cause the initial back up to be larger than the actual computers harddrive? Is there anything I can do to rectify this issue without me needing to purchase a larger external harddrive for back up?
Info:
iMac Intel Core 2 Duo, Mac OS X (10.6)
What I want to do is back up my current Mac mini (160GB hdd) with Time Machine. I then want to upgrade the system drive in the Mac mini to a 320 GB drive and restore from the Time Machine backup with all my programs, settings and files. Will it work even if the back up and restoration drive sizes are different?
View 2 Replies View RelatedMy new Macbook is only 1 week old, so there is not much (or any) useless crap that I don't want or need. The Macbook came with a 160Gb hard drive. Prior to switching to Mac I was a 4-year Linux user. I purchased a new 320Gb drive for my Linux-PC laptop just 2 months ago. I took that drive out and would like to put it in my new Macbook. I would prefer to transfer data from old to new drive rather than starting fresh all over again. So I assume Time Machine is the way to go, and/or use Migration Assistant. My question is how Time Machine works, exactly.
In Linux when you do a backup using Partimage, it backs up byte-for-byte, meaning that if you back up a 100Gb drive, it will restore that same volume size regardless of how much bigger the restore drive is. Put another way, if you buy a 150Gb drive and restore, you will end up with a 100Gb drive with no space left over. I want to avoid this! So how will I backup and restore, and at the end have a 320Gb drive, rather than another 160Gb drive? Will I have to install the OS on the new drive before I restore? And yes, I do have an external hard drive I can back up to, though I haven't used it yet.
How to copy your Time Machine contents to a new larger Time Capsule drive ? I have three Time Capsule , two new (3 and 2 TB) and one old (1TB) contaniing all my backups. Only the 3TB have WiFi enabled, the other two are using ethernet only. my Macbook Pro are using ethernet only. I want to migrate from the old 1TB to the new 2TB for backup and other contents. Problem: my Time Capsultes dont show up in Disk Utility.
View 1 Replies View RelatedI have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
My MBP has a 320GB harddrive with like 240GB used on it but I only have two 250 GB harddrives so you can see the problem I'm in. I would like to combine into a single virtual drive so that it can accommodate my Time Machine backups.
View 4 Replies View RelatedI was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files.
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
Info:
iMac, Mac OS X (10.7.3)
I just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.
Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
anyone have this problem? how can i fix it?
Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
Some quick screenshots:
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
Info:
Mac OS X (10.7.3), time cap or Time Machine
There are 3 macs:
A: an old macbook (the white one)
B: a modern macbook pro (retina)
C: another modern macbook pro (TBD)
I am giving away B now; I expect to get C in 2 months time; I keep A with me all the time.
The goal is to migrate all of the data from B to C. I have Time Machine backups of B.
Since the transition is a long time (2 months), I need to keep working on my data during this period. For this I will use A. This will generate new files, modify old ones, ...
Since A's HDD is much smaller than B's backup, I can move only part of them.
By the way, I have totally erased A and used migration assistant to restore part of my old data from B. So, when I use A now, I do it with my same account as in B (and the same I will use in C).
How do I manage my backups in such a way that, when I will get C, I can safely move all of the data I had in B plus all of the changes and modifications that I have done during the 2 month transition?
Can I just continue to use Time Machine (on A) to update the old backups? I am afraid that some mess could be created because the computers are different (before the backups were taken on B, while now on A), even the present data are different (because now A only contains a subset of the original B data, which I do NOT want to lose), the good point is that the user is the same.
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
I have a MacBook Air and a Time Capsule - both from november 2011.Using Time Machine is givning me som problems.It works fine for some days, an is backing up as planned.But at least 5 times since I got the Time Capsule, Time Machine is asking to make a full Backup, and when I look in Time Machine, it says that there is no "old backup". It has been runing since november 2011.When I start a new backup, as it ask for, it takes at least 24 hours to finish - some times even longer.Is this normal? If not, what do I do?
Info:
Time Machine, Mac OS X (10.7.3)
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation home
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
So I bought a brand new WD 1TB Elements (USB) to use with Time Machine. I've never used a Time Machine before. I have a MBP13 with a 250GB disk, using the latest Snow Leopard, all updates installed. Formatted the drive to Mac OS Journaled (extended) and set it to use with Time Machine. Works until about 15-17GBs is copied over, than it fails:
1. If I start over it fails very soon after, no matter how many times I retry
2. No matter how many times I reformat it, it always fails
3. I tried one trick I googled - deleting the "inprogress" file - does NOT help
4. SMART status is verified
5. There are no problems if I verify/repair the disk.
Can someone tell me how to configure Time Machine so it doesn't do a complete backup every time?I seem to get constant errors because my disk space fills up quickly. For some reason I don't think it did this when I first started using it. I use SuperDuper also, but have a drive connected to my iMac all the time for Time Machine.
View 1 Replies View RelatedHow can you set a specific time for backup instead of every hour on Time Machine?
Info:
Mac OS X (10.5.8)
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal. (I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I just got a 1TB time capsule after the recent refresh. Set up both my mbps for the time machine with the TC. The mbp 17" will be permanently connect to the TC via ethernet, while the 13" is wirelessly linked.
However I noticed from the mbp 17" TM preference panel that it doesn't show the specific time for the current and next backup time. See below:-
I did a search and come up with this thread. I tried the suggested method of deleting the com.apple.TimeMachine.plist file from ~library/preference/ folder. I even reformat the TC hdd via airport utility and reboot the system. Then I did a rebackup with time machine. BUT I STILL GET THE SAME RESULT~~!!!!!
What am I doing wrong? Is there something I'm missing? I just want it to show my next backup time like what my mbp13" is showing. Anyone?
P/S: IF I enter Time Machine, after exiting TM I get a mounted sparse bundle of my mbp 17" TM backup. Is there anyway to get it to unmount automatically? Is it usual for a sparse bundle to stay mounted once we exit from TM?
I just got a 1TB time capsule after the recent refresh. Set up both my mbps for the time machine with the TC. The mbp 17" will be permanently connect to the TC via ethernet, while the 13" is wirelessly linked.
However I noticed from the mbp 17" TM preference panel that it doesn't show the specific time for the current and next backup time. See below:-
I did a search and come up with this thread. I tried the suggested method of deleting the com.apple.TimeMachine.plist file from ~library/preference/ folder. I even reformat the TC hdd via airport utility and reboot the system. Then I did a rebackup with time machine.
What am I doing wrong? Is there something I'm missing? I just want it to show my next backup time like what my mbp13" is showing. Anyone?
P/S: IF I enter Time Machine, after exiting TM I get a mounted sparse bundle of my mbp 17" TM backup. Is there anyway to get it to unmount automatically? Is it usual for a sparse bundle to stay mounted once we exit from TM?
I started my backup over 24 hours ago and after it completed its 130GB backup, it has now continued backing up endlessly incrementing the xxGB of xxGB without end. I stopped the backup and it then began at 140.9MB to backup. Once it reached 149.9MB it continued; displaying 149.9 MB of 149.9 MB. It is currently at 502.4 MB of 502.4 MB. I am using Snow Leopard. Has anyone seen this happen before? Or know how to resolve?
View 1 Replies View Relatedhave a MacBook Pro 15" 10.7.4 which isn't working with TimeMachine any more When starting a backup, Time Machine tells me to backup 112kB (for example) .... an running and running, and after a short time "2kB from 112kB" ... and runnig and running and then "5kb from 112kB" and so on. The progress status is updating very slowly.
The weired thing is: the ".inProgress" file on the external hard drive (tried FireWire and USB connection) is growing to 85GB (the total used space on the hard drive) while Time machine status tells me it has saved some kB. And every backup is running in that way. Instead of backing up only the difference, all files where backuped - although the status is displaying a few 100kB - which should be the right size to backup.
- Repaired permissions > Same error
- Tried installing combo update > Same error
- Tried another external hard drive > Same error
- Tried cloning system to different hd > Same error
- excluded the Users home folder > Same error
- Interal hard drive speed > Over 70MB/s > OK
- External hard drive speed > Over 70 MB/s > OK
So had to be something with the System itself.
