I want to make a script that adjusts the output volume of my mac based on the volume that the mic hears. I am not very good with applescript, but I do know how to control the volume. I was wondering if there was a command that retrieved the input level from the mic as it is show in the sound preferences in the system preferences window.
Info:
MacBook Pro, Mac OS X (10.6.8)
I can change the volume level from the command line using this command, For example: osascript -e 'set Volume 3'. Is there a way to detect the current volume level using a similar command and a way to assign it to a variable? And just for good measure, are there similar commands for detecting and setting the current balance?
Info:
iMac, Mac OS X (10.6.7), MySQL 5.1, Perl 5.10, Apache 2.2
I normally have my MBP on full (or mostly full) volume, but when I plug in headphones, I drop it down to the absolute lowest (or one up from that) level. Anything higher than that is deafening with my headphones. Normally my MBP automatically dropped it down to about that level whenever I plugged in headphones, but recently its only been dropping it down to the halfway point. This causes momentary deafness as I hit play on my iTunes, forgetting its only halfway down, and additional deafness from the clicking as I frantically hit Fn-F4 to lower the volume. Is there a way I can set the default level that OS X drops the volume to when I plug in my headphones?
View 4 Replies View RelatedThe volume level for the built-in speakers is remembered across boots, but it is not remembered for headphones.
I.e. Whenever I plug in the headphones after a boot, the volume level sets itself to 50% - too loud for my ears and possibly damaging to the headphones.
Anybody know of a way to change this behavior? - To set an initial volume level for headphones?
I have OSX 10.5.6.
I'm creating an AppleScript application bundle that relies on a separate application. I want to add this application to my bundle and then call it via "tell application xyz ... end tell"Â
So far I have been unable to make AppleScript see this application, except when I gave it the absolute path of where it is located. Obviously, as soon as my application bundle is moved to a different directory this will not work anymore so is not a solution. Tinkering with "path to me" and thus creating the current path to the bundled application also does not work, when saving the script, ScriptEditor tries to find the application and see if the commands I want to tell it exist btu fails and consequently does not save.Â
I tried putting the application into the Contents, Contents:MacOS, and Contents:Resources folders, all without success.Â
When i click System Preferences on the apple menu nothing will happen.
View 14 Replies View RelatedMy account setting icon is missing in system preferences. Can anyone provide me with advice on how to fix this problem. Also, whenever I start the computer it makes me log on now.
My macbook pro is an OSX 10.5.8, purchased in January 2009.
Is there a way or place I can go to download the setting?
Info:
MacBook Pro, Mac OS X (10.5.8)
I watched a video and it was very loud so I went to System Preferences and turned the sound down.But now I can't mute by clicking the F9 button as I normally can. I can mute by going to System Preferences but I don't want to do this.Before I changed the volume in System Preferences, the keyboard keys worked fine for volume adjustment. I could make it quieter, louder or mute.I have tried with checking and not checking the option to display volume on the screen (in System Preferences).
Info:MBA v 3.2, 256GB SSD, 2.13GHz, 4GB, Other OS, 10.6.8
Previous History: I'm on a MacPro and I have my main user account on another volume than my system. This has worked just beautifully for me over the past years, sometimes there are drawbacks and it's kind of more failure-prone in some cases. This 'some cases' now happened again: there was a blackout and after that I couldn't login to my user account on the non-system volume anymore. I've been there once and hadn't any problems fixing it somehow, but now I screwed up big time.
View 3 Replies View RelatedWhen I try to select display in system pref. the display window will open and then close without letting me make any changes.
View 2 Replies View RelatedThe icon is gone, and when i click apple>system preferences, nothing happens. I need system preferences and this is very frustrating. Could I possibly have deleted it from my hard drive while clearing up un-used files?
View 2 Replies View Relatedmy system preferences is not accessible from the apple menu and it has a grey question mark on it in the dock
Info:
Mac OS X (10.7.3)
I get the SBBOD everytime I open system preferences. This is recent within the past few days. I have rebooted.
Info:
MacBook Pro, Mac OS X (10.7.3), Early 2011,13", 120 GB SSD, 8GB RAM
I haven't been able to access my security panel in System Preference for almost 6 months and I am very concerned......
Everything else in System Preference works, but when I click on Security the program would freeze then shut itself down.....
Does anyone had the same problem and eventually solved it?
I cannot bring up my system preferences under the blue apple icon or through a search. I installed and ran MacJanitor v 1.3 a month or so ago and perhaps that's the cause? I have been missing my Mail prefs for a long time so switched to Thunderbird but I don't know if the two incidents are related. iMac G5,1.6 GHz, 1.5 GB, OS 10.3.9
View 7 Replies View RelatedMy MacBook Pro freezes when attempting to access System Preferences. I am able to Force Quit but that's it. Screen went black for about 30 seconds earlier tonight. Never had a problem before a previous update.
Info:
MacBook Pro (13-inch Early 2011), 4 GB Version 10.7.3
My mic isn't picking up sound on my iMac, but it works on any other computer i use it on.I have multiple USB Microphones and they all have the same problem. They seemed to be working a couple days ago.
Info:
iMac, OS X Mavericks (10.9.4)
I have tried restarting, using disk utility, I cannot access Users & Groups. When I try, I get this message:Â
Info:
iMac, Mac OS X (10.7), And Macbook Mac OS X (10.7)
I am unable to access system preferences. When I choose it under the apple it brings up the icon in dock but you can't access anything in it.
Info:iMac, Mac OS X (10.6.8)
I have two identities on my MacBook Air. In the main identity, System Preferences is frozen so I can't access it to make any changes. I want to migrate my files to the other identity and delete the original one, as everything works fine in the second identity.
Info:
MacBook Air, Mac OS X (10.7.4)
I am new to the "mac world" ... just got my first macbook about a week ago so this question may have a very simple answer or it may not.
The issue I have is that in System Preferences, "Universal Access" has a bigger font size than any other window under S. Preferences. Nothing is affected, everything works well, but it just bothers me, is there any way to fix this?
I am attaching a screen of Universal Access compared with a window of normal font size.
The computer is a dual G4 1Ghz with 2Gb of Ram and two hard drives. Used to run a custom built microscope in a scientific lab. Resurrecting it is imperative, as the cards and other equipment are now out of date and replacing the computer and cards would be enormously expensive (and worse, would mean switching to PC).
There are several issues:
-No response to selecting "About this mac" from the apple logo in the upper left.
-No response to selecting restart or shutdown
-The computer freezes up (pinwheel) whenever I attempt to access System Preferences (window will appear however once mouse is over it, pinwheel appears).
-does not recognize the USB key needed to run a piece of software.
-together these issues prevent us from installing the software needed to control the scope.
I've tried reinstalling (clean not archive) the OS on the original HD and a new HD. The problem doesn't go away.Have also cleared out the systempreferences.plist and the cache for both safari and preference panes.
Recently completed the Maverick operating system update. Still getting used to new additions, however I did notice I'm unable to access the Safari preferences section. Â
I know normally, you would follow the drop down menu and click into the safari preferences. Unfortunately now the words in the drop down menu are a lighter grey and unable to click into he section.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a Macbook Air 13'' running OS X 10.9.3.
When i try to sign into icloud via system preferences i get the msg "Unable to sign in because of a problem communicating with icloud".
I am unable to access app store too.
Info:
MacBook Air, OS X Mavericks (10.9.3)
is there a simple way to upload some file on ftp with an applescript?
View 2 Replies View RelatedI created this piece of code using AppleScript Editor on OS X Lion 10.7.3 and I want to make it automatically repeat itself every 10 seconds. The code is supposed to reload the tab which the user is currently on every 10 seconds. I made the reload part but can't figure out how to make it reload every 10 seconds after extensive googling. Here is the code, can someone add the needed code it to make it reload the current page every 10 seconds and reply to me please.tell application "Safari" activateend tell tell application "System Events" tell process "Safari" keystroke "r" using {command down} end tellend tell
Info:
MacBookPro, Mac OS X (10.7.3)
I need an applescript that can click on certain points over and over again.
Info:
MacBook Pro
This works except for the exit quick mask mode.Anyone else been able to do it? tell application "Adobe Photoshop CS5.1" activate tell front document if (quick mask mode) then exit quick mask mode.end tellend tell
View 2 Replies View RelatedI am using a script that Jacques Rioux kindly helped me out with a couple days ago. I altered his script a little to complete a different task I needed to create a shortcut for. The script below first creates two folders (TIFF & JPEG) and then it sorts files with an extension .tif into the 'TIFF' folder and files with the extension .jpg into the folder named 'JPEG'. This works great but I would like the script to effect multiple folders. Can anyone help me add to the script so when you click it, a prompt will pop up allowing you to choose multiple folders to apply the script too? As of now it will only work on one folder at a time.
Info:
MacBook
Pro, Mac OS X (10.6.8)
