I have a small home network. Three macs all running the latest version of Snow Leopard (as of right now 10.6.2). I have my Mini acting as a file server. We do remote backups via SuperDuper to an attached HDD on the mini. So it just runs and does nothing. On the mini I have the admin account and then two "sharing" accounts. Lets call the sharing accounts 'user1' and 'user2'. I have shared one folder with 'user1' and a different folder with 'user2'. That way each user has their very own folder to put whatever file they want in there without the other user accidentally deleting or messing around with their files.
Both user account computers can connect to the Mini with no problem. The problem is that both user accounts can see and write to each other's folders. I have the permissions via "File Sharing" in System Preferences --> Sharing --> File Sharing set so that only the user and admin have read/write privileges and Everyone has no access. I know something is wrong because I have this exact setup at work and users can only see their shared folder.
I have two users defined on my macbook (one is New, and the other one, the Old one, is what I've always had).I was re-configuring File Sharing on the Old user.I turned files sahring off in the Old User, but when I log into the New, I can still acess to some folders that I have never set to be shared; only few folders have the red restricted access on it. The New User does have file sharing disabled, and non of its folder can be accessed; so, it's working Ok for this New User.Â
Network file sharing has always been buggy in my windows/mac mixed environment, but I managed to live with it. It worked for 85% of the time. However, since upgrading to SL, it now works less than 5%. It keeps telling me "there was an error connecting to the server. please check ip addr, etc.......". It'd work for a few minutes after each restart and then resume its habit of annoying the hell out of me. Is this a common problem with Sl and Win 7? (BTW, win7 to win7 or win7 to vista file sharing works perfectly).
Today I tried do download some anime at animesuki and since I use transmission as my torrent client, it refuse the download or upload. I never had that issue with leopard but with snow leopard it refuse to upload anything to the web. I had to turn the firewall off.
Things used to be simple with Leopard and XP, with the network browser working seamlessly like magic, detecting the XP within few seconds after it connected. But that's no longer the case. Since I upgraded XP to 7, automatic detection of the Mac side was going on and off, and folder access was also on and off, somewhat unreliable. Then I upgraded from Leopard to Snow Leopard, the automatic detection is completely gone, complete reliance on cmd+k now, and something strange happened . . .
I've figured out how to share Mac files with Windows, and it is working properly on the Windows side. The problem is the other way round, where I can get only some Windows folders shared and not some others. The settings are exactly the same, and that brings me to a dead end.
I have a headless PC that is running Win7. I want to connect directly to it via ethernet for a nice Gigabit transfer rate. The PC will be relatively portable (I intend to customize a bag for it to fit in) so you can see why I can't just network it all with a router. Anyway, I've hit a few snags. The two computers simply don't see eachother when it comes to their ethernet adapters. Here is the network breakdown:Â Win7 has a wireless-N adapter (which connects fine to the wireless router here, finds my Macbook and can share files normally), and the ethernet adapter, which I've managed to successfull connect to another Win7 laptop fine, but will not see my mac.Macbook's wireless is also fine, but ethernet adapter, which I've never had problems with networking before, also does not see the Win7 machine.Â
The Win7 machine has a static IP, and I've even added the IP to the Network Pane WINS list in OS X along with the workgroup name, yet I try to ping/connect to the IP address and I get nothing.Â
I use a VNC application called TeamViewer to remotely view the headless PC, not sure if that is interfereing, but I don't believe it is. Wire is not a crossover, but I'm going to assume that this macbook's ethernet is switching it automatically. Do I need to disable the wireless adapters?Â
In iTunes when I right click on a song and click "get info", then change some info, it doesn't stick. It goes right back to what I already had in there before. I then realized that this is because every file inside my iTunes music folder is set for "read only" and not "read & write". So after I change it to "read & write" all changes I make in iTunes will take. However, I have a lot of music and therefore a lot of files inside my iTunes music folder. Going into each and every folder to change its permission to "read & write" would be tedious and time consuming,
I recently started a position where the previous person left me very little information. I am not familiar with hosting locally as I have always used GoDaddy.  There are several sites set up, so I have some "template" to go off of, but I need the basics. If i purchase the domain somewhere and the multiple sites are hosted on a single IP, how can I direct to a specific folder? Do I just create a folder within the volume all others are then make it a shared folder? Set the protocol options to match one that is alread there?Is there a beginers guide to this, and all the settings and options available somewhere?Â
I am running os x 10.5.6 on a macbook and windows vista on another laptop. I can't connect to my printer wirelessly from the laptop (not compatible), so I want to be able to print files on my macbook from the other laptop (which is connected to the printer). I've been using this [URL] guide in order to help me make it work, and I've looked at alot of other guides that say the same thing. I have all my settings exactly like these, however when I try to look at the Mac's files from Vista, I can get into the home folder but then cant access any of the other folders (music, documents, etc.) It simply says access denied, does not ask for a password or anything.
I've had a fairly unusual problem since about 10.5.4 (on 10.5.8 now). My iMac, when connected to any other Leopard Mac, shows up as two computers in finder under "shared". Have a look at the attached pic. It shows its normal name as it should, but then it has the BSOD Windows icon (which represents a shared PC) with the name "mac001b63a6fc3b". Why would it do this? Does anyone know how to get this away?
I treid to set up file sharing between my macbook pro and my husband's macbook and this has effected Mail. He can receive email but not send from his laptop but can do so remotely. Some thing has changed on his laptop but I can't find out what.
I have a PMG5 with Leopard 10.5.6 on it. I did have it sharing with the PCs on my home network via SMB. Lately, however, it has stopped and XP kept giving errors saying that could not connect to the Mac . I tried every fix and checked every setting I could find on the net, then, on a whim, set the firewall to allow all incoming network connections (essentially turning it off). Wallah! Suddenly the Mac and the PCs were friends again. The firewall is set to allow File Sharing to go through but it isn't doing it. It will only share when it is off. What do I need to do to solve this issue?
Does anyone have the Mac Mini setup as a Server for File Sharing, iCal Sharing, etc. using 10.5 Leopard Server. If so, does it work well or are there issues. Currently, I have a Western Digital My Book hooked up to the Time Capsule to share files, but the lack of setting permissions will not work in the near future.
After updating from 10.5.8 to 10.6.1 I was not able to use screen sharing any more to connect to a machine running 10.5.8. If I click on "Share Sreen..." in finder, by default my short name is used (e.g. jwhite) Using the correct password I was faced with the message: (Authentication failed to "...".) Please verify you have entered the correct name and password. This worked fine in Leopard to Leopard. Snow Leopard to Leopard did not work. Trying a lot of things I managed to use screen sharing without a problem by using the full name (e.g. John White instead of jwhite)
I've been having a few troubles sharing the internet from my MBP to my Xbox 360 lately. My university only lets us have ONE wireless card registered on the system for security reasons, or else I would just use the Xbox 360 Wi-Fi Adapter. I share the internet over an ethernet cable to my Xbox. Lately something weird has been happening, internet sharing stops working.
Not just a simple drop in the Airport connection, but the actual setting for Internet Sharing changes on it's own. My computer isn't restarting when this happens, it's random when it's still online. Usually if it drops signal from the access point it still starts working again after the signal picks up. I go into the Sharing preferences to find that the Internet Sharing check box has unchecked itself. Once I check it back and restart my Xbox 360, it works again.
I have 2 Mac Minis (10.6.8) and a laser printer in my upstairs office, while my Cable Modem is downstairs. I use one of the upstairs Minis to connect via wireless (to a SonicWall TZ210) and then share the connection via the Ethernet port, which is connected to a gigabit switch, along with the printer and the other Mini.Â
As long as the host Mini is logged into a user, the other Mini can connect to the Internet just fine. I had to tweak the settings on the TZ210, to allow for the shared subnet on the upstairs network, but - as I said - it works just fine as long as someone is logged into the host Mini.Â
However, as soon as the user logs OUT of the host Mini, the client mini can't ping, nslookup, surf, or anything else. It's like Internet Sharing has been deactivated on the host Mini.Â
How can I get Internet Sharing to continue to function on the Host Mini when no users are logged in?Â
Info: Mac mini, Mac OS X (10.6.8), I actually have TWO of these!
I am using my iMac with a media player to stream movies to my TV. I configured Internet sharing and locked it, turned on Airport, configured the media player, it connects to the network and everything works fine for a startup/shutdown cycle.
But the next time I start up the media player cannot connect to the network. I check internet sharing and find it still connected but it is now unlocked. I must turn off Airport, de-select internet sharing, re-select internet sharing which brings a start dialog box, then back to Airport.
How can I keep this configuration permanently in place?
I'm having a problem I think with the internet sharing feature in snow leopard. Here's what I'm trying to do. I have a cable modem plugged into a time capsule in another room, and I use a mac mini to connect to that via wifi. I am trying to share that internet connection with a couple of devices from the mini's ethernet port. I have the mini plugged into a dlink switch along with the other devices, but none of those devices can connect. The mini works fine, and I made sure in sys prefs I have internet sharing checked and it says from airport to ethernet. Can the mini only provide connection to one device? Should I be using something other than a switch?
We have an Xserve (intel) with two ethernet ports running on OS X 10.6.8 server. It is connected to our network and sharing files with local users and authentication from our PDC (over an AD network). I need to setup a private network so that we can keep a few PCs off of our primary network (primarily to keep them from getting updates pushed or malware). Using the two ethernet ports, this should be do-able. It's practically automatic on a couple Windows boxes we have setup. However, when I plug a small router into the second ethernet port, I instantly lose the PDC communication on the other. I'm not sure if there are other issues at this point or not because there hasn't been a time when I can bring the system down (yet).Â
I have just purchased a new iMac with Leopard. I already own a MBP with Tiger and I am trying to shares files between the two. The MBP connects to iMac and shows files easy as...however I have enabled sharing on iMac when I choose Network it recognises the MBP but always says connecting and after a few minutes shows connection failed.
My settings do not allow for sharing of my iMac or its folders and files. Yet, another person's Shared Folder is appearing on my iMac and I cannot remove it. How do I remove it and did it get there by this person hacking in?
I have a 3.06 Intel Core Duo iMac and a 253 Intel Core i5 Macbook Pro. Both are running 10.6.8. They have until recently successfully shared my HP C8180 All in One Printer, the iMac being connected to the printer via USB and to a Netgear Router via Ethernet and the Macbook Pro being linked to the router wirelessly.Â
Having just updated the HP Drivers via software update on both machines the Macbook Pro is no longer able to connect to the printer via the iMac wirelessly and the printer is not reported as being "Nearby". It does however connect via the iMac if it is connected to the router via Ethernet !Â
Printer sharing is on on the iMac, I have tried removing the printer from both machines Preferences and re-instating them (which coincidentally has meant I have lost the connection to "Lightscribe" and can't get it back on either machine !) I've tried installing the latest HP Software to try and get the Macbook pro to connect to the printer directly via the router but witth no success - it reports that some of the HP software is not compatible with 10.6.8 despite HP saying it is for 10.6.Â
how I can get the laptop to print in the way it did up until earlier today and how to get "lightscribe" back?
I recently upgraded from Leopard to Snow Leopard. Unfortunately this disabled the remote management status icon in the menu bar? Any way to get it back? Before when I "screen shared" this computer the remote management status icon would appear in the menu bar, now it's gone. I tried enabling remote management but I can't authenticate when I try to connect from my Leopard PowerBook.
startup banner.JAWBONE UPDATER ERROR: Failed to inspect the lock file '/Users/[user]' (error 2: No such file or directory)."Â Jawbone support writes, "get in touch with Apple Support, so they can help you unlock the file on your Mac.Â
My daughter has dropped her ageing MBP, bent the screen lid and now the screen is no longer usable. We have other Macs available to access the data on the screen if we could turn on Screen Sharing on the damaged MBP running Snow Leopard.Â
Until now i am using Leopard and "Split & Concat" as a File joiner. But now i upgraded to Snow Leopard and when i try to join files using Split & Concat .....i ma getting below error
"Apple Script Error -- The variable the Panel is not defined.(-2753)"
So I've been having a lot of internet issues since clean installing leopard. My neighbor, who works for Verizon, came over to take a look and thought I was having some DNS issues. He edited the "host" file and now my internet connection seems even worse. I found instructions online on how to edit the host file, but could someone post what the host file is actually supposed to look like in Snow Leopard since I don't know what he changed? I still have a completely clean install of SL, no 3rd party apps yet.
After getting a replacement IMac and restoring all my files, applications, etc., from a Time Machine backup, I went to run a game I have which attempted to install a patch, but the patch would not apply, why, file permissions I'm sure. It looks like when Time Machine restored my computer it also restored my previous user account. I had to login as the restored user account to apply the patch. Now this brings up some questions.
My new user account is an admin, why wouldn't it be able to apply the patch. I logged into my old account to give my new account read/write permission on the game folder, but still couldn't apply the patch? Do I have to be the owner? Any good links about file permissions in Snow Leopard. I'm thinking I may have to re-install these apps to fix the permissions.
I'm trying to acess a .sol file of mine, but a pop up keeps on appearing- "Apple Script Editor cannot open files in the Apple Script Editor Document format." I just want to know- is there someway I can open said file, or something I can download to allow me to open the file?
