We were having problems with our server, and found that it was because of DNS settings. We now have a FQDN, but nobody can log on. How do I import the users and groups to the new domain?
Info:
Xserve, Mac OS X (10.6.8)
I just installed Snow Leopard, and immediately I noticed that everything was darker. I had to adjust the gamma to get it to look normal, but things seem a little too bright now. Also in Adium, it messed up my fonts. My text is so small while my received messages are normal size, and I can't seem to get my sent message text to be the same size as my received message text. There are other small things too, but it's annoying and I'd like my old configs back, is there any way or do I just need to put up with it?
View 6 Replies View RelatedI have just bought a MacMini Server (2 hard disks) built early December 2010. It comes with SL Server. My old setup was a normal version of SL.if I can import the old account from the SL version in to SLS?Â
Info:
MBP, MM, MBP - 10.6 + Windows XP on a hard partition
I currently have an address range from 192.168.200.1 to 192.168.200.250 (subnet mask 255.255.255.0).......and I need more IP addresses. Â
If I change the subnet mask to 255.255.254.0, and increase the DHCP pool from 192.168.200.1 to 192.168.201.254.....will this work.Â
I have a couple of statically assigned printers, so I am guessing they will need their subnet mask changing as well.
Info:
Mac Mini, Mac OS X (10.6.4)
I've got networked clients logging in and occasionally having problems, especially with shared logons. I bet changing the location of temporary files from the home folder (on the server) to the local machine would fix a lot of issues.
Info:
iMac, Mac OS X (10.6.8), i5 with Thunderbolt
currently using mac mini server for sharing files and folders. Would like to setup VPN to get access to files remotely.
-Model identifier: Macmini 3.1
-Mac OS X Server version 10.6.8
I am not sure if this version supports VPN.
Info:
Mac mini
If I use the iCloud suggested settings as per: ENTERING iCLOUD MAIL SERVER SETTINGS IN SNOW LEOPARD
as per Roger Wilmut's suggestions -[URL]...will all my other incoming and outgoing mail accounts still work as usual?Â
Info:
iMac 7,1 Intel Core 2 Duo, Mac OS X (10.6.8), 2.4Ghz
I have a G5 Duel 2GHz Power PC, Recently I was losing the time, date and wireless settings so I assumed as my machine is now 4 years old the PRAM battery was up for renewal.This has now been replaced but I'm still losing my settings, not all the time but randomly, sometimes I lose my wireless key sometimes I lose time and date sometimes both, this can happen daily.
I have removed the (New) Battery and checked the voltage and it reads 3.6 Volts, I haven't checked this under load though, so presuming that the battery is OK, what else could cause this.. a failing System Board?
i have a domain controller and active directory based policy win 2003, one xserve running mac os x server 10.6.8 and alot of macs workstations. How can i push login script on all macs without adding it in login items? The script i want to store on smb or afp share disk, and will be edited from time to time. I've tried to add it on xserve from WGM, but it threw an error that current directory schema doesn't store desktop settings.So how can i solve this?
View 2 Replies View RelatedI run 10.6.8 server in a VM with Parallels Server for Mac. Lithium pinged me early Monday morning to tell me that my calendar server wasn't reachable. I found it had kernel panicked. After resetting it and verifying the directory structure and permissions, it booted fine. But availability or free/busy wasn't working for all users! The events were all there. Invites could be sent and received but when a user checks for availability when creating events. they see the daily work hours grayed out but not anything corresponding to a scheduling conflict. Â
Things I have Tried:
- bounced ical server
- Rebooted the server
- checked the owners and permissions for the data store hierarchy. (_calendar:_calendar 750)
- checked for xattrs on .ics files in several calendars
- deleted .db.sqlite for several users in several dir in their calendar stores
- in the past I have found that some iTIP invitations seem to get "stuck' causing problems with an individual users free/busy and deleting the inbox resolves this so I deleted several inboxes
-I moved a copy of the data store to a test server and pointed several clients at it.Â
The issue persisted in all of these cases without any change in behavior with one exception; somewhere (i lost track of where) during this process users also lost their delegation preferences. I'd love to find out how and where that is stored so that it can be restored in the future. It seems pretty fragile...Â
I found one way to restore the functionality; copying a users __uid__/<GUID>/calendar out. . Moving all the folders under <GUID> out of the way and dropping the .ics files into ical with their account configured in that instance. Although this worked for selected users, I have many, many users and calendars so this solution would be suboptimal. Â
Info:
Xserve, Mac OS X (10.6.8)
my problem is that on a restart of one of my 10.6.8 Servers parts of the Serveradmin configs are gone while some of them persists. The lost configs are everytime the same: VPN (complete) and iChat (a secondary but very important Host-Domain). Of course a can restore them from a backup but that shouldn't the standard procedure after a restart....Â
View 11 Replies View RelatedI am running an open directory/active directory network. Authentication is from the Windows server 2003 active directory. It has worked fine until the last month. Now clients stop authenticating & when I check the AD plugin it says network accounts are not available. I can force the server to unbind, then renew the binding & everything works great.Is there any work around or fix for this other than upgrading the windows server to 2008?Â
Info:
OS X server, Mac OS X (10.6.8)
I had a goodworking SUS (10.6.8) working but the drive is getting full so i change the location of the files to another disk (in the xserve)and follow instructions from Apple (page 84 from the manual System Imaging) sudo cp -p /private/var/db/swupd/html /Volumes/My_Volume/My_Software_Updates_Folder/This works and i copy the files to a new drive. I also change the SUS so that theu host files for Lion clients url..works also, start SUS in Server Admin but when clients wants to connect i get an error that there is no SUS available and when i use the browser for an check i get een Forbidden error url...ForbiddenYou don't have permission to access /index.sucatalog on this server.Apache/2.2.21 (Unix) Server at 127.0.0.1 Port 80.
View 1 Replies View RelatedTrying to set up the Software Update Server under 10.6.8 Server. Have everything set up properly as per Apple's documentation, but all clients error out on software updates (saying they can't find the index. sucatalog file). When you view this file, which is an alias, within the HTML folder that is created when you enable the Software Update service in Server Admin, the alias doesn't link to an original.I've tried this on two separate 10.6.8 Server installations and I get the same error on both machines.Where is the alias "index.sucatalog" supposed to point to?Software Update Error Log in Server Admin says "Symbolic link not allowed or link target not accessible" and points to the alias file.
Info:
Mac mini, Mac OS X (10.7), Xserves (Early 2009, Early 2008, G5), Mac Pro
My system is MacPro 2009 with 10.6.8 server and Apple RAID card. Last week, RAID util just notified me of one drive is not viable, so i decided to replace the drive today. The configuration of my system is... There is an Apple Raid Card for HW Raid system Bay 1 = 640 TB drive with Mac OS X 10.6.8 server installed Bay 2, 3, 4 = 1.5 TB drives set up as RAID 5 below is what I did to replace the degraded Bay 4...Â
1. I shut down the system
2. replaced the corrupted drive with the new hard drive
3. tried start the machine again.Now my machine refuses to start up with the blinking question mark... I guess that the system fails to recognize the new drive or cannot find the system files...Â
4. So I put back the degraded drive...
5. The machine still won't start...
6. I tried to use the 10.6 server installation disk to boot up the machine to check if I can fix the system via disk util; but, everytime I do this, I got kernel panic... Â
7. resetting PR Ram didn't help, cannot boot up via safe mode as well (since the system file is not accessible now, I guess...).
8. booting via 10.6.2 server installation DVD still gives me kernel panic... Â
Why would my system corrupt by just replacing one degrade drive? The Mac OS X is not even the part of the Raid system... How am I supposed to fix this issue with out the installation disk?
Info:
Mac Pro, Mac OS X (10.6.8)
Years before Mac OS X 10.0 was first released in 2001, Apple launched Mac OS X Server, targeting its newly acquired Unix-based operating system technology at the education and workgroup server market. Apple has struggled ever since to find a broad server strategy that works. The solution may be as obvious as the iPhone App Store. Mac OS X Server has remained firmly stuck in the background even as Mac OS X has blossomed. Over the last decade of Mac OS X's development, Apple transformed its legacy Mac operating system from an outdated relic stuck in maintenance mode throughout most of the 90s into a highly regarded system that gets as much or more respect from industry critics as any other desktop operating system.Apple accomplished something that many others in the industry failed to do: marry the power and familiarity of Unix with accessible ease of use in a commercially successful product. Ray Noorda tried to do this at Novell in the early 90s; Caldera's OpenLinux also failed to take over the task from Novell ten years ago. United Linux and a series of followup attempts to standardize Linux all failed to accomplish their aims. A variety of efforts to sell Linux to consumers since then have all made very little progress outside of a small niche of hobbyist users.
View 39 Replies View RelatedI don't use any of it and would like to update to lion with out the server portion.
Info:Mac mini Server (Mid 2010), Mac OS X (10.6.8)
Up until a recent update, software update was working. Now it just crashes. I've tried deleting the Pref's and downloading updates directly, but that hasn't helped.
Info:
Xserve, Mac OS X (10.6.8)
I'm trying to install a SSL Certificate on a mailserver under 10.6 server. I dont know what to do by intermediate certificate and choosing type on certificate assistant.
View 3 Replies View RelatedServer version is: 5.0.8 Current available seems to be : 5.5.24 community server available from h [URL]if I already have several databases running under 5.0.8Â what are the hazards with upgrading to 5.5.24 community server?
Info:
Mac mini, Mac OS X (10.6.8)
I can't seem to get the App Store to sell me Lion Server for my Snow Leopard Server.I'm trying to remain positive about this but I'm getting really that money isn't enough to make this happen.My experiencewith the App Store and Apple policies in general is its almost time to dump OS X and head back to Open Source.I put money in my iTunes account.I've done the 15 logins it takes to satisfy AppleID my account is complete and up-to-date in the store and the Support Communities.How do I buy the software and actually download and install it?
Info:
Mac mini, Mac OS X (10.6.8), upgrade to Lion
I only have macs in my network and am not aware of any mac viruses. Afer I had the chance to review everything it became clear the e-mail server was sending out e-mails. SMTP logs for my mail server showed numerous attempts between yesterday and today to send out e-mails. Considering my mail server has not yet been launched and is not being used to either send or receive e-mail I imagine the work must have been done by a hacker ro sometoner else who hijacked my mail server to send out spam e-mail to others.Â
How can I prevent this from happening again the in future? Is there a security setting that would prevent this? My firewall had a relatively long and safe password but I changed it today just in case. Also, I changed the password for both the firewall and server. Will this help or is it possible for a hacker to connect and gain control of mail mail server without the need to know these passwords? If not in OS X Server, is there a third party application that would protect the mail server from this in the future?Â
As an administrator (without FileVault protection) on Snow Leopard, I created a standard user account (test user1) with FileVault protection. I just want to get familiar with it before creating real accounts. But as an administrator I can't look at files created by test user1. I get a message that I don't have permission.
Do I need FileVault on for the administrator in order to do this? If not, as an administrator, why can't I see what's on other user is doing? Is there a way as an administrator I can see what's files are downloaded, created, websites visited, etc? I'm aware of creating a user account with Parental controls, but would that give me the ability to see what's in the folder?
I'm fairly new to Mac's and loving it so far and I'm very excited to be receiving my 27" iMac tomorrow and since this computer is going to be shared amongst my wife and myself. What is the best way on Mac's to handle 2 users?
The only concern I'm wondering about is email contacts, Internet bookmarks and possibly a few other small things.
I've come to the conclusion that my user account has been corrupted.I created a new standard account, but obviously all my settings and files are on the other account.How would I transfer these to my new account?
Info:
Mac OS X (10.6.8), iPhone 4
I cannot access the Accounts pane from System Preferences. Each time I click on the icon, I get a message that says "system preferences has quit unexpectedly. I've already repaired the permission, deleted system preferences plist, installed the combo update and logged in as a different user. Everything else works just fine.
Info:MacBookPro, Mac OS X (10.6.8)Unable to access accounts
I have a 2006 Mac Mini using Snow leopard OS X 10.6.8.It will start up to show the 2 User accounts that are set up however when one of the accounts is selected all that appears is a totally blue screen with only my mouse curser working on it. Is there a fix for this?
Info:
Mac mini, Mac OS X (10.6.8)
Looking at upgrading my current 4 year old iMac to a new 27inch iMac - need more horsepower and memory. Wanted to know if there is a simple way to move/copy user accounts and their files from the old iMac to the new keeping permissions etc intact. Old iMac currently running Snow Leopard. Â
Info:
iMac, Mac OS X (10.6.8), PC running XP
How can I use two I cloud accounts on my Mac. 1 for music and the other for contacts, calendar, mail
View 1 Replies View RelatedI have a Snow leopard server with a folder shared Via SMB for the 2 PC's we have, all the macs can read and write to this folder OK. About once a week the 2 pc's take 10 mins to start and then cannot connect to the share. Web/email and sharing betwen them still works. I can ping the server from both. I've turned off the smb and restarted it. Also tried restarting the Xserve. This still has no effect. All internal firewalls are off. I've tried guest access.
Info:
Xserve, Mac OS X (10.6.8)
