OS X Server V10.6 Snow Leopard :: Changing Subnet Mask From 255.255.255.0 To 255.255.254.0
Apr 10, 2012
I currently have an address range from 192.168.200.1 to 192.168.200.250 (subnet mask 255.255.255.0).......and I need more IP addresses. Â
If I change the subnet mask to 255.255.254.0, and increase the DHCP pool from 192.168.200.1 to 192.168.201.254.....will this work.Â
I have a couple of statically assigned printers, so I am guessing they will need their subnet mask changing as well.
Info:
Mac Mini, Mac OS X (10.6.4)
View 2 Replies
ADVERTISEMENT
Jun 22, 2012
I've just taken receipt of a Linksys NSLU2 "Slug". It's essentially a small diskless NAS that allows you to plug in and share USB hard drives over the network. It passes its own POST, and is connected via a fully-functional Cat6 ethernet cable to an Airport Extreme Base Station 802.11n (hereafter simply, "AEBS") running firmware 7.6.1. In a nutshell: I can't make the Linksys NSLU2 (hereafter known as simply, "the slug") available over the network.Â
The problem appears to be this: the slug requires that the LAN use a subnet mask of 255.255.255.0. This is its default setting and, if it can be changed, I have to get it connected to the network first. The AEBS currently reports a subnet mask of 255.255.252.0. So far as I have been informed, it is this subnet mask mismatch between the slug and the AEBS that is preventing connectivity.I'm currently using Airport Utility 5, simply because I'm more accustomed to its settings. If I launch it, authenticate into Manual Setup, and navigate to Internet>TCP/IP, it displays the following information:Â
Actual problem:If I edit the Subnet Mask to 255.255.255.0, and click UPDATE, I get the following error message:The router address you have entered is not compatible with your WAN IP address
It then lets me change the Router Address before continuing. However, neither I nor my friend (whom I do believe knows more than a fair bit about networking) have any idea what this Router Address is. It is in no way similar to the router's Private IP Address assigned using DHCP ranges. It is a Public IP Address, and shares the first two octets with my IP Address. Because neither I nor my friend know what this represents, or what it is for, we're reluctant to mess with it. But until we "mess" with it, we can't change the subnet mask on the AEBS, and thus I can't access the slug!
Info:
Mac mini (Mid 2011), Mac OS X (10.7.4)
View 2 Replies
View Related
Apr 24, 2012
We were having problems with our server, and found that it was because of DNS settings. We now have a FQDN, but nobody can log on. How do I import the users and groups to the new domain?
Info:
Xserve, Mac OS X (10.6.8)
View 3 Replies
View Related
Jun 8, 2012
I've got networked clients logging in and occasionally having problems, especially with shared logons. I bet changing the location of temporary files from the home folder (on the server) to the local machine would fix a lot of issues.
Info:
iMac, Mac OS X (10.6.8), i5 with Thunderbolt
View 9 Replies
View Related
Apr 3, 2012
currently using mac mini server for sharing files and folders. Would like to setup VPN to get access to files remotely.
-Model identifier: Macmini 3.1
-Mac OS X Server version 10.6.8
I am not sure if this version supports VPN.
Info:
Mac mini
View 1 Replies
View Related
Mar 22, 2012
i have a domain controller and active directory based policy win 2003, one xserve running mac os x server 10.6.8 and alot of macs workstations. How can i push login script on all macs without adding it in login items? The script i want to store on smb or afp share disk, and will be edited from time to time. I've tried to add it on xserve from WGM, but it threw an error that current directory schema doesn't store desktop settings.So how can i solve this?
View 2 Replies
View Related
Jun 14, 2012
I run 10.6.8 server in a VM with Parallels Server for Mac. Lithium pinged me early Monday morning to tell me that my calendar server wasn't reachable. I found it had kernel panicked. After resetting it and verifying the directory structure and permissions, it booted fine. But availability or free/busy wasn't working for all users! The events were all there. Invites could be sent and received but when a user checks for availability when creating events. they see the daily work hours grayed out but not anything corresponding to a scheduling conflict. Â
Things I have Tried:
- bounced ical server
- Rebooted the server
- checked the owners and permissions for the data store hierarchy. (_calendar:_calendar 750)
- checked for xattrs on .ics files in several calendars
- deleted .db.sqlite for several users in several dir in their calendar stores
- in the past I have found that some iTIP invitations seem to get "stuck' causing problems with an individual users free/busy and deleting the inbox resolves this so I deleted several inboxes
-I moved a copy of the data store to a test server and pointed several clients at it.Â
The issue persisted in all of these cases without any change in behavior with one exception; somewhere (i lost track of where) during this process users also lost their delegation preferences. I'd love to find out how and where that is stored so that it can be restored in the future. It seems pretty fragile...Â
I found one way to restore the functionality; copying a users __uid__/<GUID>/calendar out. . Moving all the folders under <GUID> out of the way and dropping the .ics files into ical with their account configured in that instance. Although this worked for selected users, I have many, many users and calendars so this solution would be suboptimal. Â
Info:
Xserve, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 6, 2012
my problem is that on a restart of one of my 10.6.8 Servers parts of the Serveradmin configs are gone while some of them persists. The lost configs are everytime the same: VPN (complete) and iChat (a secondary but very important Host-Domain). Of course a can restore them from a backup but that shouldn't the standard procedure after a restart....Â
View 11 Replies
View Related
May 15, 2012
I am running an open directory/active directory network. Authentication is from the Windows server 2003 active directory. It has worked fine until the last month. Now clients stop authenticating & when I check the AD plugin it says network accounts are not available. I can force the server to unbind, then renew the binding & everything works great.Is there any work around or fix for this other than upgrading the windows server to 2008?Â
Info:
OS X server, Mac OS X (10.6.8)
View 2 Replies
View Related
Mar 14, 2012
I had a goodworking SUS (10.6.8) working but the drive is getting full so i change the location of the files to another disk (in the xserve)and follow instructions from Apple (page 84 from the manual System Imaging) sudo cp -p /private/var/db/swupd/html /Volumes/My_Volume/My_Software_Updates_Folder/This works and i copy the files to a new drive. I also change the SUS so that theu host files for Lion clients url..works also, start SUS in Server Admin but when clients wants to connect i get an error that there is no SUS available and when i use the browser for an check i get een Forbidden error url...ForbiddenYou don't have permission to access /index.sucatalog on this server.Apache/2.2.21 (Unix) Server at 127.0.0.1 Port 80.
View 1 Replies
View Related
Jun 28, 2012
Trying to set up the Software Update Server under 10.6.8 Server. Have everything set up properly as per Apple's documentation, but all clients error out on software updates (saying they can't find the index. sucatalog file). When you view this file, which is an alias, within the HTML folder that is created when you enable the Software Update service in Server Admin, the alias doesn't link to an original.I've tried this on two separate 10.6.8 Server installations and I get the same error on both machines.Where is the alias "index.sucatalog" supposed to point to?Software Update Error Log in Server Admin says "Symbolic link not allowed or link target not accessible" and points to the alias file.
Info:
Mac mini, Mac OS X (10.7), Xserves (Early 2009, Early 2008, G5), Mac Pro
View 1 Replies
View Related
Jul 2, 2012
My system is MacPro 2009 with 10.6.8 server and Apple RAID card. Last week, RAID util just notified me of one drive is not viable, so i decided to replace the drive today. The configuration of my system is... There is an Apple Raid Card for HW Raid system Bay 1 = 640 TB drive with Mac OS X 10.6.8 server installed Bay 2, 3, 4 = 1.5 TB drives set up as RAID 5 below is what I did to replace the degraded Bay 4...Â
1. I shut down the system
2. replaced the corrupted drive with the new hard drive
3. tried start the machine again.Now my machine refuses to start up with the blinking question mark... I guess that the system fails to recognize the new drive or cannot find the system files...Â
4. So I put back the degraded drive...
5. The machine still won't start...
6. I tried to use the 10.6 server installation disk to boot up the machine to check if I can fix the system via disk util; but, everytime I do this, I got kernel panic... Â
7. resetting PR Ram didn't help, cannot boot up via safe mode as well (since the system file is not accessible now, I guess...).
8. booting via 10.6.2 server installation DVD still gives me kernel panic... Â
Why would my system corrupt by just replacing one degrade drive? The Mac OS X is not even the part of the Raid system... How am I supposed to fix this issue with out the installation disk?
Info:
Mac Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Oct 14, 2009
Years before Mac OS X 10.0 was first released in 2001, Apple launched Mac OS X Server, targeting its newly acquired Unix-based operating system technology at the education and workgroup server market. Apple has struggled ever since to find a broad server strategy that works. The solution may be as obvious as the iPhone App Store. Mac OS X Server has remained firmly stuck in the background even as Mac OS X has blossomed. Over the last decade of Mac OS X's development, Apple transformed its legacy Mac operating system from an outdated relic stuck in maintenance mode throughout most of the 90s into a highly regarded system that gets as much or more respect from industry critics as any other desktop operating system.Apple accomplished something that many others in the industry failed to do: marry the power and familiarity of Unix with accessible ease of use in a commercially successful product. Ray Noorda tried to do this at Novell in the early 90s; Caldera's OpenLinux also failed to take over the task from Novell ten years ago. United Linux and a series of followup attempts to standardize Linux all failed to accomplish their aims. A variety of efforts to sell Linux to consumers since then have all made very little progress outside of a small niche of hobbyist users.
View 39 Replies
View Related
Mar 10, 2012
I don't use any of it and would like to update to lion with out the server portion.
Info:Mac mini Server (Mid 2010), Mac OS X (10.6.8)
View 2 Replies
View Related
Mar 23, 2012
Up until a recent update, software update was working. Now it just crashes. I've tried deleting the Pref's and downloading updates directly, but that hasn't helped.
Info:
Xserve, Mac OS X (10.6.8)
View 3 Replies
View Related
Apr 18, 2012
I'm trying to install a SSL Certificate on a mailserver under 10.6 server. I dont know what to do by intermediate certificate and choosing type on certificate assistant.
View 3 Replies
View Related
May 19, 2012
Server version is: 5.0.8 Current available seems to be : 5.5.24 community server available from h [URL]if I already have several databases running under 5.0.8Â what are the hazards with upgrading to 5.5.24 community server?
Info:
Mac mini, Mac OS X (10.6.8)
View 1 Replies
View Related
May 27, 2012
I can't seem to get the App Store to sell me Lion Server for my Snow Leopard Server.I'm trying to remain positive about this but I'm getting really that money isn't enough to make this happen.My experiencewith the App Store and Apple policies in general is its almost time to dump OS X and head back to Open Source.I put money in my iTunes account.I've done the 15 logins it takes to satisfy AppleID my account is complete and up-to-date in the store and the Support Communities.How do I buy the software and actually download and install it?
Info:
Mac mini, Mac OS X (10.6.8), upgrade to Lion
View 5 Replies
View Related
Jun 16, 2012
I only have macs in my network and am not aware of any mac viruses. Afer I had the chance to review everything it became clear the e-mail server was sending out e-mails. SMTP logs for my mail server showed numerous attempts between yesterday and today to send out e-mails. Considering my mail server has not yet been launched and is not being used to either send or receive e-mail I imagine the work must have been done by a hacker ro sometoner else who hijacked my mail server to send out spam e-mail to others.Â
How can I prevent this from happening again the in future? Is there a security setting that would prevent this? My firewall had a relatively long and safe password but I changed it today just in case. Also, I changed the password for both the firewall and server. Will this help or is it possible for a hacker to connect and gain control of mail mail server without the need to know these passwords? If not in OS X Server, is there a third party application that would protect the mail server from this in the future?Â
View 6 Replies
View Related
Feb 14, 2012
I have a Snow leopard server with a folder shared Via SMB for the 2 PC's we have, all the macs can read and write to this folder OK. About once a week the 2 pc's take 10 mins to start and then cannot connect to the share. Web/email and sharing betwen them still works. I can ping the server from both. I've turned off the smb and restarted it. Also tried restarting the Xserve. This still has no effect. All internal firewalls are off. I've tried guest access.
Info:
Xserve, Mac OS X (10.6.8)
View 2 Replies
View Related
Mar 20, 2012
I'm trying to using Server admin on a remote Mac to manage our xserve. Both are running 10.6.8 and I've installed the Server Admin tools onto the mac. Both the Workgroup manager and Server Monitor work OK on the mac, but whenever I try and connect the Server Admin it always comes up with the error : "The login information is incomplete for this server or is not valid. The server failed to accept the login information you provided for <servername>. Check the name and password and try to log on again" I can't connect using the server name, FQDN, or IP address. The macs are all using OD and AD and I've tried both AD and local OD accounts (all administrative) but to no avail. DNS is working OK and I can resolve the server-name with dig and dig -x. I can screen share the server so connectivity isn't the problem.Â
View 8 Replies
View Related
Apr 24, 2012
I've googled and searched, I can't see what I'm missing, so I am turning to the community for help, because I simply don't get this. I own 2 domain names. I'd like to use the build in Mail Server application into SL Server, so if your suggestion is using another mail server, please don't post that.Â
Let's say my domain's are domain1.com and domain2.com I've looked at the Mail Server Admin user guide, and I've followed a couple of wizzards, and... all in all, I am getting no where. Let's also say my email client is my iPhone.Â
Ok, so domain1.com currently has no email with my current provider, and domain2.com currently has email from my current provider, it's my desire to eventually switch this, but experimenting on domain1.com will do no harm, so I am experimenting on this. Both domains give me the ability to point to an mx address.Â
Here's what I've done. I've got my user created in Workgroup Administrator, and I am confiuguring my LDAP3v, and I am authenticated enough to create and delete users.Â
***I Should note that DNS is currently disabled, I gathered from all my reading that I don't need the DNS enabled because I manually put in the MX record to mail.domain1.com and domain1.com is correctly identified. The server is also the webserver, and all the web server functions are working as expected! I don't know if not having the DNS enabled is holding me back or not ***Â
1st, I enabled the mail service in the Server Admin. My domain name is ServerName.local and my host name is mail.domain1.com (I created an a entry in my dns settings for that). Enable SMTP is set, IMAP and POP are enabled as well.
I don't intend on setting a relay, because I want this server to do send email out. I do have some cases where I send a mass email out, not for spam but for Christmas card purposes, and I think this is a good free way to not have to limit myself to batches of 50 or so.
I have my created SSL certificate, and havce only the Kerberos and CRAM-MD5 settings set in the security.
In my hosting section, I have enabled Virtual hosting, and listed my domain1.com and domain2.com below.
Now in workgroup manager, I've connected to my LDAP3v database and created a test user, and a test group. In the server admin, I added the test group to the list of authenticated mail users. I made my test user a member of the test group, and made that his default group. I enabled the mail service, and set the mail server which is ServerName.local, and enabled POP and IMAP.Â
That's it. I've done nothing in terminal, just that. I was getting a user unable to authenticate error, it was able to download the certificate though. Then I realzed I had an MXE defined in my settings for my DNS domain manager. So I changed to an MX, to mail.domain1.com and then I created mail.domain1.com pointing to the same IP address as domain1.com, and unfortunately the DNS records haven't updated yet, because I initially didn't create the mail.domain1.com entry, and now it's saying the server isn't responding, so I am anxiously awaiting an update from the DNS in the world to see if the issue has now cleared up.Â
Info:
Mac mini Server (Mid 2010), Mac OS X (10.6.8)
View 5 Replies
View Related
May 16, 2012
I just configured my Snow Leopard Server to distribute Lion update's [URL]I also see that the sync is competed with all latets Lion update's and all are enabled. I've adjust all the settings on the clients:sudo defaults write /Library/Preferences com.apple.SoftwareUpdate CatalogURL [URL]The problem is that all my 10.6 and 10.7 clients doesnt see any availble update's and running the Software Update on the cllient i get the message "The software is up-to-date" I checked all the configs.....reset the complete SUS server and started all over but still the same issue!
Info:
Mac OS X (10.7.3)
View 3 Replies
View Related
May 22, 2012
I have problem with a clients windows laptop. It used to be able to connect to their companies mac server. But since he got back from a trip the laptop doesn't connect anymore. I can ping the server. And when I try to redo the network drive I'm prompted to enter my credentials. But whatever I enter it doesn't work.I already tried to use SERVERNAMEuser.... and also check security policies.
Info:
Windows XP
View 3 Replies
View Related
Jun 20, 2012
I have a clean install of 10.6.3 Server (retail) and every time, after the post-installation reboot, I get to the Welcome screen and I can't use the local mouse/display to go any further (the "Continue" button is dimmed out). And there's the spinning progress wheel in the bottom, left corner. From past headless server installations, I think what's happening is the server is waiting for a remote connection to continue with the installation (via Server Admin or Apple Remote Desktop). Because I've had the logic board (just) replaced, I can't do a remote install as it's not accepting the "new" serial number associated with the logic board (ie. first 8 charachters), nor is it accepting the 12345678 password. So, I'm forced to do a local install — but, I can't even do that now because I'm stuck on the Welcome screen.Â
I've tried reinstalling the OS several times now, let the machine sit on the welcome screen for an hour, tried doing it with out and without network cables attached (including different ports on the Mac Pro, different cables, etc.), but I just can't get passed the Welcome screen.Â
Info:
Mac mini, Mac OS X (10.7), Xserves (Early 2009, Early 2008, G5), Mac Pro
View 1 Replies
View Related
Jun 28, 2012
Since last day, i can't access my wiki server from any mac on my network.I've got the first web page, but when i select "Wikis", an 503 error occurs.Â
Info:
Mac Pro, Mac OS X (10.6.7), Server
View 1 Replies
View Related
Jan 18, 2010
First, I'm a n00b Mac user but I'm reasonably tech smart and I want to make the jump to OSX. I need a mac for the wife, who will use it in the living room connected to our TV. She does email, light desktop publishing, and a metric ton of movies and music: the iTunes library alone is 300GB. Plus she watches DVDs on it. I was thinking about buying a refurbed mac mini server (It's at a discounted price) but I don't need Snow Leopard Server. I'll add the external superdrive later.How hard would it be to just install regular Snow Leopard instead of Server?Also, in regular Snow Leopard, how would the HDDs show up in OSX? One big 1TB drive or 2 500gb drives?
View 7 Replies
View Related
Apr 30, 2012
I am running multiple services with the latest version of OS X Server (10.6.8) on my MacMini (web, vpn, mail, ichat, ical, address book, etc.) . Everything has been working fine for the last year and no changes have been made to the server, settings, ISP, or DNS, with the exception of installing the latest system software updates. Now, when I try to open my websites or connect remotely via VPN I get a "cannot connect to sever" message. All other services are still working as they should. The server is hooked up to an Airport Extreme via a cable modem with a static IP. I have tried the following thus far:
1) checked all cables and they are plugged in and seated properly.
2) restarted the server, airport extreme, and cable modem
3) turned Web services off and on again in Server Admin
4) checked the DNS via the web and my site addresses are pointing to my static IP address
5) checked the Airport's port mapping to make sure Web Service was still on
6) checked my websites SSL certificate to make sure it's current and enabled
7) tried disabling SSL
8) created and enabled a new self-signed SSL certificate Â
Recent log activity shows:
Apr 29 11:38:49 xxxxxx-corp org.apache.httpd[47667]: Syntax error on line 13 of /etc/apache2/proxy_sites/0000_any_8443_localhost.conf:
Apr 29 11:38:49 xxxxxx-corp org.apache.httpd[47667]: SSLCertificateKeyFile: file '/etc/certificates/xxxxxx-corp.com xxxxxxxxxxxxxxxxC96C30F1986D48D59D227F1.key.pem' does not exist or is empty
Apr 29 11:38:49 xxxxxx-corp com.apple.launchd[1] (org.apache.httpd[47667]): Exited with exit code: 1
I'm assuming the "key.pem' does not exist or is empty" part is the issue, but I am a novice and have no idea what that means.
Info:
Mac mini, Mac OS X (10.6.7), Server
View 1 Replies
View Related
Jun 8, 2012
I've been configuring Mac OSX Servers for a while, but in every configuration I have seen many bugs in Access lists.For example, if I put a group in an access list and then I add an user to the group, the ACL is not applied to that user. I have to add it manually to the ACL.Is it normal? I've read the whole documentation, but no clues on what makes this happen. Â Also if I put "special" permissions into a folder (for example, anybody DENY delete this folder only) it doesn't work. The permissions is the first in the list.
the effective permissions inspector works with the second try (I drag and drop the same folder two times and different permissions appear). Does anybody have issues like these?Â
Info:
Xserve, Mac OS X (10.5.8)
View 1 Replies
View Related
Nov 2, 2009
I just installed Snow Leopard, and immediately I noticed that everything was darker. I had to adjust the gamma to get it to look normal, but things seem a little too bright now. Also in Adium, it messed up my fonts. My text is so small while my received messages are normal size, and I can't seem to get my sent message text to be the same size as my received message text. There are other small things too, but it's annoying and I'd like my old configs back, is there any way or do I just need to put up with it?
View 6 Replies
View Related
