I'm trying to add a Samsung CLX-2160 printer, but the driver is not in the list of pre-loaded drivers. I've downloaded the driver from Samsung's site, but cannot find it when I add the printer. It's not in the list, and when I click "other" to find it, I can get to the file ("SamsungCLX-216xSeries.ds", in Hard Drive/Library/TWAIN Data Sources), but there is no option to add it.
View 3 RepliesWhere can I get the printer driver for the samsung ml-1710 printer?! It doesn't seem to be on the samsung page. Also... will it work on a new intel mac? If not, what are my options here?
View 24 Replies View RelatedJust one small hiccup with my lovely new machine - my samsung ML-1510 mono laser printer has no intel mac driver available and I can't print, i've searched all-over but to no avail.
View 22 Replies View RelatedRecently I installed a samsung printer driver for Mac OSX to use my SCX 4100.
After reformatting my powerbook I went to the samsung supportsite to download the driver. But is was no longer available for download.
So.. I searched etc.etc. and found others looking for the missing driver, too.
Here it is: (download link) scx 4100 driver for Mac OSX
note: it does not support scanning.
I have a MacBook Pro 5,2 with OS X 10.6.8. I also have a Samsung Galaxy S2. I want to hook it up to the Mac to use as a USB tethered network device so I can use it on the train and wherever wifi fails to work. I can get the phone set up right, but the Mac doesn't see it as a network device. There is a Windows network driver for the phone but not a Mac driver that I can find. I CAN use portable WIFI hotspot, but with 2 radios running my battery life is terrible and I get some serious network lag.
Info:
MacBook Pro, Mac OS X (10.6.4)
my macbook won't connect a device saying the usb driver not found. The computer used to find this driver but not since I installed Lion.
Info:
MacBook
I recently obtained a 2013 Macbook air 13" and upgraded the os to Yosemite. I plugged in my travel printer, Canon BJC-85 and there is no driver compatible. The mac recognized it as plugged in but under the list of available installed drivers there is nothing that will work with it.
I tried to do a software update but it says my system is already up to date. I went to the canon website and it said mac OS X already has the drivers.
I used this printer on another mac OS X laptop and it had the drivers already like it should.
Info:
MacBook Air (13-inch Mid 2013), OS X Yosemite (10.10.1)
I have installed the generic PCL Laser Printer driver in order to use my Samsung ML-6060 printer, because Samsung no longer supports this printer for macs.
For several weeks the generic driver worked beautifully. Now I'm having a problem. When I print a document the printer puts out a blank page other than the letters OE in the upper left corner. The next page is the document itself. I tried uninstalling and re-installing the driver with no success.
P.S. I need to correct my computer description. I have returned to System 10.8.5 on my Mac Pro (early 2008) desktop.
Info:
PowerMac, OS X Mavericks (10.9), 2 x 2.8 Ghz Quad-Core Intell Xeon
I hooked it up to my network and everything and the wireless printing works great.
Recently I had to take the printer out, so I unplugged it from my modem and plugged it in somewhere else for USB use.
I tried printing something, forgetting that I couldn't print wirelessly anymore.
I have just purchased a Samsung CLX-3175N, and have established connection to it over a network from a MacBook Pro (Mac OS X). The scanner works fine, but the printer does not. When I try to print the job comes up momentarily on the printer queue, then the printer beeps, the job disappears from the queue, but nothing prints. Can anyone tell me how to solve this problem?
View 6 Replies View RelatedWhen attempting to print from Acrobat on Mac OS 10.6 to a Samsung CLP 310, all lights and control panel are OK, then green light on printer flashes, then .... nothing happens. Updated printer driver without result. Printer dialog box shows partial print, so seems to have stalled, but usually that's all that happens.
View 4 Replies View RelatedI just got this laser printer, and in the specifications says that it can print on Both Sides manually. How can i use this feature where it prints every other page first? In the printing options i see "Two Sided Printing" but I can't click on this feature.
View 3 Replies View RelatedI purchased this printer, and I thought that it was able to print legal paper. However, I been looking through the manual, and also been searching online. It "mentions" that it can, but there are no instructions on how to.
I was wondering IF someone does has this printer, are you able to printer on legal paper & how were you able to?
I have an Intel Mac Mini
I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
I just purchased a Time Capsule for my Mac, and now I am able to hook up a Canon laser printer directly to it. My Mac recognizes the printer connected to the Time Capsule, but keeps aksing me to "Choose a Driver or Printer Model" when I am setting it up. I have downloaded the Canon print driver from the Canon website and I can find the Canon folder on my hard drive. However, it seems that I can't fine the actual driver.
Info:
iMac, Mac OS X (10.7.3)
First, I'm a noob on MACs so forgive the nooby nature of the question.
I'm setting up a printer on a Macbook to use a printer shared from Windows 7. Followed the tutorials I found for the network side of things and that seems to be fine (Mac send unprintable files to the Windows print queue).
The problem is the print driver on the Mac. The printer is a HP PSC 1315. It's not on the list when you Select Drivers during printer setup and even after loading the HP 111 updated, still no joy.
I downloaded the 1315-specific driver package and ran the installation but I have no idea how to find the driver to use during printer setup.
I am trying to print from my iMac to a Canon SELPHY ES 1 using Gutenprint v5.2.3 driver and connected using a USB cable. The printer and Mac recognise each other but it doesn´t work.
Info:
iMac, Mac OS X (10.7.3)
Just bought a Samsung 2333SW Monitor and plugged it into my Mac Mini. The screen looks like the monitor was dropped (psychedelic) when the desktop is displayed. It worked fine on my 17" Samsung monitor, but not the 23".
I exchanged the monitor, and its not the monitor. I was told its the driver on the Mac. I cannot find any driver online for my Mini through Apple, or even at the Samsung sites.
Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again. Then, if the Print dialog box has a [Printer Info] button, acquire the printer information.: 10322
Info:
Mac OS X (10.7.4)
Is there a plan to release a print driver for the FujiFilm ASK-4000 Dye Sub printer?The current driver worked well with OS 10.6; but as my Mac Pro took on updates I began to experience issues printing.The thought of restraining my Mac Pro is absurd.
Info:
Mac OS X (10.6.8)
My Brother 2170W wifi laser printer was working fine under Lion 10.7.3, and then I decided to replace my router with a new Airport Extreme. Same SSID as before, same password, but the printer was suddenly unavailable. After many tries at reinstalling/reconfiguring, finally got the latest drivers reinstalled and the printer added to the printers list via wifi. As long as I don't try to print to it, it shows up as ready and online in the Printer prefs pane. As soon as I try to send something to it, it can't be found. It shows up as "in use, last used" in the pref pane, but in the Queue dialog, it shows as not connected.
Info:
iPhone 4
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I want to connect a wireless Epson XP 510 printer. Installed drivers from the Epson website but they do not appear to be compatible according to the drop down list in the apple menu for adding a printer.
Info:
iMac, Mac OS X (10.5.8), Epson XP 501
I have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer!
It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does.
I had a Dell 1100 laser printer working on my iMac (G4 ball type) using a GIMP printer. I had to reset the queue and lost the driver. I can't remember which GIMP driver I used. Also, although I have loaded the latest GIMP s/w, I can't seem to get to them in Tiger 10.4.6.
View 24 Replies View RelatedWe are trying to install/update to the NVIDIA 270.00.00f06 driver for the PNY Quadro FX4800 for Mac on our MacPro 3,1 with OSX 10.7.4. The system tells us "No Driver Update Needed for this System", and will not allow driver to be installed. Can anyone advise if the current driver is automatically installed or provided by Apple Updates. If not can you provide proper instructions on how to properly update the driver. Also how can we confirm what driver version is currently installed.
Jim Teames 7/03/2012
Info:
Mac Pro (Early 2008), Mac OS X (10.7.4), PNY Quadro FX4800 for Mac, 10GB mem
Is there a way to force Safari to print what I see on a webpage, and not default to the print style? I'm trying to print a graphically-rich site and the print.css doesn't cut it, making everything look like trash (unformatted text, etc.).
View 1 Replies View RelatedWhen I print multiple checks they print in the wrong sequence. If I have checks 401, 402 and 403 in the printer in that order, they print 403, 402 and 401. How can I change this to print not collated?
Info:
Mac Pro, Mac OS X (10.7.4)
I'm trying to print an Excel 2004 .xls spreadsheet file where I'm using to record attendance for the class I teach.I have my main Column A with Rows A-X and it shows up fine, I imagine because there is content in the boxes.
But I also have Columns B-L and rows A-X with nothing in their cells, but when I print it, they won't print.I need these blank because I'll check them off if the child in the first column attended the lesson. How do I make it so my many blank cells will print as well?
I have had difficulty in attaching my HP Photosmart C5580 printer to my new MacBookPro (OSX 10.6) through my Netgear WGPS606 print server. After much searching I found previous posts here which advised me to add the Gutenprint driver 5.2.6 which I did. That finally DID successfully attach the printer through the server.
However, there is a lag of many seconds (sometimes minutes) between the SEND command and the starting of the printer. Is this the new normal that I need to expect or is there a fix?
