I have a Powermac Dual G5 @2.0ghz, with 8gbs of ram, and 2 1tb drives running the latest version of 10.5. The problem I have is that I have 4 LCD monitors that I was using with my PC. I swapped that out with my mac, and while I am no novice, I didnt take into account that I cant just put any AGP and PCI video card into the system. What I need to know is if I can use two PCI video cards both with Dual Monitor outputs, and if so, which cards should I buy, and where? I found some video cards on ebay that are PCI, and it is quartz extreme compatible, but I am unable to use it with the AGP card already installed. The person selling the cards was unable to answer whether or not two of those cards could be used together. I only have about 75 per card to spend. Please help, I cant go on using this awesome machine with only one 19inch LCD. and I cant afford to buy new monitors
I am looking for a tear down guide for my 4 core power mac. I need some instructions on how to remove the CPU's since I bought this for $100 and found the part for $250.
I've got a g5 2.5 dual mother replace to a 1.8 dual g5 tower, nothing happen except all the fans, did anyone know is it work, or my 2.5 mother board also dead?
Will the stock Mac Pro video card: NVIDIA GeForce 7300 GT, work in a PowerMac G5 Duallie 2.0 (mid 2004 model) with the pci-x slots? would a Cube G4 Rage 128 video card work in thePM G5? (I bought a G5 without a video card and I need to test it and find a cheap video card for it).
Information: 17" MacBook Pro 2.16/120/2gb ram Mac OS X (10.4.10) Mac Pro 2.66, 250 & 80gb hdd, 2 DL-SD, 7gn ram, APX & BT
I scanned the posts and didn't see this question, but honestly I didn't read all 20K + messages.I bought in late 2005 a dual 2.3 G5, about 6 months before the Mac/Windows combination came out. Does anyone know if I can upgrade or is it too costly to do so compared to buying a new machine.
Information: PowerPC G5 Dual 2.3 Mac OS X (10.4.11)
I currently have an ATI 4870 card in this Mac Pro (late 2009). I use this rig for heavy Adobe Creative Suite 5 and FCP work. I use dual Apple LED 27" monitors.I'm about to order the 5870 graphics card upgrade from Apple, but before I do, is it possible to run TWO 5870 graphics cards? I am running into conflicting information and trying to get a definitive answer. If yes, do I need additional power cables and if so, which ones?
Alternatively, I've read the 5970 card is essentially two 5870 GPUs on one chip.Will this be a better solution?I also want the cards to be drop and play ready/natively supported. As I rely on this computer for business, I'm not interested in continually chasing down third-party drivers.
Can anyone confirm or deny if the ability to switch between the Nvidia 9400m and 9600m GT without having to relog is included with the latest build of SL?
I have a powermac G5, dual 2.5 ghz from 2004. I was wondering what the best graphics card upgrades are. I currently have an nvidia Geforce 6800 ultra, but I really want something with more vram
i replaced the motherboard on my dual 867MHz G4 MDD.the computer turns on now, and i did a fresh 10.4.11 install...but i noticed that it says "Dual 800" instead of "Dual 867" in my "About This Mac" now. i typed "sysctl hw.cpufrequency" in the terminal and discovered that it is actually running at 800MHz, and not 867MHz.
I had a weird issue this morning. I started computer and it did not make the chime sound, it didn't do anything at all. I disconnected it from the extension cord as well as all the peripherals attached to it and nothing. I tried a different start up disk and again there wasn't a sound. Then i unplugged it and reset the SMU on the mother board and air sprayed the computer to remove all dust. Then plugged it back and it came back on.
Information: Power Mac G5 Dual 1.8 Mac OS X (10.4.11)
I searched but couldn't find anything that I needed. I picked up some MDDs(dual 1.25 & FW800 1ghz) with bad power supplies and eying up another MDD(Dual 867) which is working. Will the dual 1.25 and single 1ghz processor daughter card work on the previous model? I know the System clock is different and heard about removing a resister on the first gens to 167mhz FSB. I will also try and transplant the PSU too to check to see if my 2 MDDs fully work or not.
I currently have 4 x 512 PC3200 installed. Is it possible to remove 2 of the modules and replace them with 2 1gig PC5300? I remember my old G4 used pc100 and I was able to upgrade with PC133. Not sure if the same concept applies here.
I am posting this here as well as in the Logic area, to try to get some help. I am desperate, as i can't work. In Logic Pro 7, I can't click anything in the right pane of the bounce dialog box. I CAN select PCM, Mp3 etc. on the left, but get no response from the mouse when trying to change the sample rate, interleave, dithering etc. on the right. I also can't click the flip-box to select different packages in the Loop Browser. I haven't noticed this happening in other applications. DOES ANYONE READING THIS KNOW HOW I CAN GET SOME HELP FROM APPLE? I am told i can't even buy apple care because my computer is too old. I don't know what to do. Tried trashing prefs. Not running any failed audio units. Nothing new in software update. Don't really know what else to do.
I'm working on a Mac Dual g4 desktop computer at work, and it won't turn on. We've always had troubles with a sticky button, but it usually comes on after a couple tries. Just before I had this problem, we had tried to switch to an older startup, which gave us trouble, so we went to restart the computer and that didn't work either. Have been reading through discussion posts etc to troubleshoot, tried switching out the power cord and PMU restart, no luck. Unfortunately don't have a keyboard with a power button... What now?
I cannot seem to get my second hard disk (lower drive bay, B) out of the machine.
I've disconnected the data and power cables from the drive, lifted the B drive swing tab out of the way...but no matter what that drive seems to be wedged in there pretty good.
Information: Dual G5, and stuff. Mac OS X (10.4.9)
I have been searching the net for 2 straight hours now. I cant get my g5 to read dual layer dvd +r disks. Not write but read. My ibook g4 can just fine. My drive is a pioneer dvr-107d. I keep reading about updating the firmware but for the life of me i cant firmware anywhere.
Information: powermac g5 dual 1.8 Mac OS X (10.4.10)
I have a question about the Dual-Proc MacPro's power management:
If you are only running one or two applications, using one or two cores, is the power management smart enough to put one of the processors to sleep, or into a low-power mode?
Is there an upgrade beyond 10.4.11 to Leopard 10.5 that doesn't require an intel-based mac. I bought Snow Leopard 10.6.3 and it tells me that I need an intel based mac. Will 10.5 leopard work?
Info: Power Mac G5 (Late 2005), Mac OS X (10.4.11), Dual GHz Power Pc
I just bought a Dual 1,25 Powermac. Included were the original restore discs. I've installed the OS 9 package, but when I try to boot from OS 9, I get the flashing question mark on startup.
Info: PowerMac, Mac OS 9.2.x, Dual 1.25 with Firewire 400
I have a Mac pro 1,1 model and recently upgraded the video card to a Saphirre 6870 card. It works great right out of the box on both Mac and pc side of my Mac pro. From my online research, this card seems to be the best card that works with my mac pro so far, however I plan on getting an even more powerful card to use exclusively on my windows partition for games. I want to get a 6970 card, but that one may not work on the Mac side, so I plan on using both cards (the 6970 for the pc side, and the 6870 for the Mac side). There are two ways that I think may be possible but I wouldn't know how. One, is there a switch device that allows me to switch between cards without having to disconnect and reconnect them every time ? And second possible way, is there a way to house the second video card externally with its own power supply? The issue if that the are not enough power connections for both cards, so is there a way to power one card externally?
I have a PowerMac G5 single processor. I went out to the Apple store and they sold me this new graphics card.(PCI x) They insured me that it would work on my g5 and will work with dual monitors. Well thats not the case today. it didnt fit in my computer and was wondering how would i get a dual monitor on a powermac G5
I have a G5 Power PC with Dual Ghz 2.5 processors. I have two 250 GB hard drives, my primary drive has 45 GB available and my secondary (storage drive) has 10 GB left.
My problem is that I have 6.5 GB of installed and recognized RAM, and yet I constantly hear my hard drive spinning up, as though the OS is using virtual RAM off of my hard drive(s), and ignoring my plentiful system RAM.
This happens when launching every application - big or small - and even surfing the internet. I open Activity Monitor and see that my Virtual memory is 7.2 when idle and grows to 8.5 with a couple of programs open. My page in/out is 48919/0.
This "spin up" sound happens all of the time, whether I am working on something or not, but particularly when I launch programs. No background programs (such as a virus scanner) are installed or running.
So my question is this: Is there any way that I can adjust OS X (latest version) so that it strictly reads my system RAM first before going to my drive? Some setting somewhere? I thought that OS X (as in all computers) only went to the hard drive's VM when it ran out of System RAM. Am I missing something?
Information: Dual 2.5 GHz PowerPC G5 and iMac G4 800MHz w/ 1 GB RAM Mac OS X (10.4.10) G5 Dual 2.5 Ghz 6.5 GB DDR SDRAM, 2 - 250 GB HDs Logic studio 8 and Adobe CS3 Suite,.
A G5 PPC Dual 2GHz that I am working on freelance for a client apppears only to have 4 RAM slots - could this be the case? I thought that from the 1st Generation onwards all G5s contained 8 slots.
Information: G5 Dual 2GHz PPC Mac OS X (10.4.10) FCS 2 - FCP 6.01, Motion 3.0.1, DVDSP 4.2.0
I am about to sell my Dual 1.8Ghz G5 Power Mac. I bought this from somebody used, and it came with Leopard on it.How can I erase everything on it? I am used to a dell where I just pressed two buttons and it just put a clean copy of XP on. Do Macs require discsI wasn't given a disc when I purchased the Mac, so I sure hope not!
I have Dual 1.8 GHZ Power PC G5 with 1.5 GB DDR SDRAM, with OSX version 10.4.11.My computer has been getting increasingly crazy over the past couples weeks. I'm even having trouble typing this because the screen occasionally "flashes" or "jumps" when I'm in the middle of a task.I noticed the problem first when I would make a new folder. After an untitled folder was made, when I would try to give the folder a new name, the screen "jumped" and I would have to try several times before I could complete the task.
