OS X Mavericks :: MBP Will Unable To Boot WITHOUT PRAM Reset
Aug 22, 2014
Updated to OS X Mavericks last week. Ever since, it has been experiencing boot problems.
- If I restart my Macbook Pro (2011 13", lowest model), it will sit at the grey screen with apple logo and spinning grey wheel forever. I notice that my HDD is NOT running (no clicking / writing sounds)
- If I restart with a PRAM reset or holding down option to select Macintosh HD boot, the hard drive starts to run (I can hear it) and it boots successfully... it takes 5+ minutes to boot up. The grey screen with apple logo is presented on my screen for about 4 minutes, then the login screen shows up but I cannot move my mouse or select a login user for 30 seconds. After this, I can log in succesfully.
-Also, switching users takes 1+ minutes. Clicking "switch user" freezes my screen.
Info:
Mac Pro
View 3 Replies
ADVERTISEMENT
Jan 8, 2011
My macbook pro won't boot past the grey screen, I've tried reseting PRam, running fsck from single user etc to no avail. All signs would point towards a hard disk failure, but the curious thing is that it sometimes mounts in disk utility when booting from the install CD, so theres a little life left in it yet! I have fairly recent backups of most of my files, but there are a couple I've been working on in the past few days that won't be backed up. So my question is this - is it possible to copy files from my mac HD onto a external drive through the terminal/disk utility while booting from the CD.
View 6 Replies
View Related
Mar 6, 2012
I have a MBP 13inch from 2011
recently i zapped my Pram becuase i was having trouble with a external screen but when I turned it on again the screen when to the grey screen with the apple logo and spinning gear but after 2 hours of wating the screen is still the same. What can i do to get back onto my mac?
Info:MacBookPro, Mac OS X (10.6.8)
View 2 Replies
View Related
Dec 2, 2014
Recently my MacBook Air has failed to wake from sleep mode. The Apple illuminates on the back of the screen casing, but neither the screen nor hard drive actually wakes up. The only way I'm able to use the computer is by forcing a PRAM reset on restart (command-option-P-R). I've had to do this several times in the last two weeks.
The only things about my MacBook Air that have changed in that time period are:
- I installed OS Yosemite
- I installed and ran Sophos Anti-Virus
(The latter was installed to counteract a problem that I was having with my email address having been spoofed and sending spam. Sophos found two bits of malware in email data files and "cleaned" them up.)
Info:
MacBook Air, OS X Yosemite (10.10.1)
View 2 Replies
View Related
Mar 21, 2012
I am running Mac OS Lion (10.7.3) on a 8-core Mac Pro. As I turned on my mac this morning, I found out that I was unable to use my wireless mouse, and also that I couldn't open my bluetooth settings. Apparently, the entire module disappeared from the System Preferences, and when I went to one of the articles on here, I saw that I'm supposed to reset my PRAM and SMC in order to make my bluetooth work again. The problem is, that I don't know what PRAM or SMC are, nor do I know how to reset them.
Info:
Mac Pro (Mid 2010), Mac OS X (10.7.3)
View 3 Replies
View Related
Aug 9, 2009
I have already covered these steps:1. I have tried a safe boot. 2. I have tried to reset the NVRAM and the PRAM.3. I have tried to reinstall OSX from the Install Disk.4. I have tried to repair the HD and tried to repair permissions using the Disk Utility. he issue started out as the flashing Apple/Question Mark Folder/"No" sign. I attempted to follow the steps on the Mac Support Forums (ones listed above) and the issue developed into the picture shown.
View 3 Replies
View Related
Jan 20, 2009
I have a 17" Powerbook G4 1.5 GHZ. I lost all sound from one moment to the next. System preferences says Audio output Headphones however no sound from Headphones either. I tried to reset my PRAM, however when I hold down "Option" "Command" "r" and "P" the computer won't restart. The hard drive seems to be stuck at this point and won't go any further. I went to the Apple store and the Genius lost patience and said we should send it out. (I'd rather not)
I have also reset the PMU
Everything else works fine.
I've looked at several other threads and post. Everyone with a sound problem seems to be able to get it resolved with a PRAM reset. However I find nothing on my the problem of not being able to reset..
View 4 Replies
View Related
Sep 7, 2014
I have inadvertently left my 2011 MBP running with a processor intensive music app running. The battery ran out before i realised.. When i attached the power lead to charge it, the computer automatically restarted without even pressing the power button. The computer had not entered safe sleep mode, presumably because my music software was still running.
Since then the computer will not ever enter safe sleep when the power runs down. The battery just cuts out each time when it drops to less than 5%, it does not run out at 0% like it usually does. if it is the logic board battery because i have had this issue a couple of times before but it rectified itself after a few days. I have checked that safe sleep is enabled which it is, but the computer just cuts out before safe sleep kicks in.
Info:
MacBook Pro (13-inch Early 2011), OS X Mountain Lion (10.8.5)
View 1 Replies
View Related
Nov 30, 2007
I have tried two different brands of blank CDR in my drive and both times, they fail to mount and in Disk Utility, show up as Sony DVDs (neither of them is a Sony or a DVD), but not writable. I have no problem with media that already has content. I've tried resetting PRAM, but nothing else yet.
Information:
Powermac G5
Mac OS X (10.4.10)
View 2 Replies
View Related
Feb 25, 2008
I tried the SMC & PRAM reset. Now, there is a delay in my keyboard and mouse. For example as I am writing this, as I type, I am observing a ~1/4 sec delay between me pressing a key and the GUI registering it. The same with the mouse. I can click-and-hold over say File and move it up and down over subsequent menu items and it the GUI doesn't highlight the menu item unless I slow down the movement.
View 1 Replies
View Related
Aug 15, 2010
Can someone explain to me why resetting PRAM on a machine has any effect whatsoever for networking issues? ie; self assigned ip etc. I have noticed this is a common troubleshooting step that a lot of people are recommending for issues related to networking.
View 3 Replies
View Related
Mar 12, 2012
when i do a PRAM reset, they will prompt me for a password or serial, may i know what password or serial is that?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 3 Replies
View Related
Jun 29, 2012
When exactly do you need to reset the SMC, PRAM or repair permissions?
Info:
iMac, Mac OS X (10.7.3), iMac Late 2009
View 3 Replies
View Related
Aug 22, 2010
Today I noticed that my mid 2010 MBP is not automatically sleeping. I ran Apple's extended hardware test, along with TechTools Pro 5 from AppleCare disk. Both passed. Reset the SMC and PRAM. I'm still not able to auto sleep. Is there a way to see what exactly is causing my computer to not automatically sleep? Console messages or something?
View 7 Replies
View Related
Apr 9, 2012
When I restart my Mac it chimes several times as if the PRAM is being reset. Could this be telling me my internal battery is dead?
Info:
Mac Pro, Mac OS X (10.6.8), 8 core 9gb RAM
View 1 Replies
View Related
Jul 9, 2009
I recently purchased a 13" 2.26 stock macbook. It's perfect, screen is good (no scrolling issues or purple blues) with no dead pixels, no slanted keys, and no scratches.
I updated the firmware that addresses the SATA 1.5 issue. After the update, I reset PRAM. I held down the buttons till I heard the second or third startup bong.
Here is where it gets funny.
Now, when I reboot or start up my computer, the start up noise is loud. Even with headphones plugged in and also the volume turned to its lowest setting (even with volume turned off). Eventually, to control the startup noise, I had to install the startupsound program in my system prefs as mentioned on other threads and that has seemed to control the startup sound.
I was wondering, if by resetting the PRAM if I have harmed my computer in any way. Should I be worried about deeper issues with my computer since the startup sound was not previously being affected by reducing the volume to zero with headphones plugged in?
View 10 Replies
View Related
Jul 19, 2009
I understand the steps needed, but how many times should I reset the PRAM and how many times should I here the startup sound (in total) before releasing the buttons?
View 3 Replies
View Related
Sep 11, 2009
I attempted to reset the PRAM on my macpro running snow leopard this morning, by rebooting and holding cmd-option-p-r until the apple logo appeared, at which point I released and then machine then rebooted a second time. I went back to the computer about an hour later and it was stuck on the apple logo screen, with no sounds coming from the CPU. I did a hard reboot by holding down the power key and it started up fine. I've never reset the pram before and so I didn't know what I should expect as far as the process being successful, but after an hour stuck on the apple logo I figured it got stuck on something.
View 1 Replies
View Related
Feb 25, 2006
I have a G4 MDD Dual 1.42ghz, When I hold down the Command-Option-P-R keys during restart it doesnt do anything. It keeps going straight to the gray screen and starts up. I dont know what to do. Anyone know whats the problem? Also my computer cant wake up from sleep or even go to sleep all the way.
View 7 Replies
View Related
Apr 29, 2012
Firmware password will not reset. Resetting PRAM fails. Resetting NVRAM in Open Firmware fails. Resetting PMU fails.
Info:
MacBook Pro, Mac OS X (10.7.3), (MacBook pro 8,1)
View 4 Replies
View Related
May 18, 2012
I have tried SMC and PRAM resets, and the issue has not been resolved. My magsafe is lit up with a bright green led. Battery status is "Not Charging." When I unplug the magsafe, the system immediately shuts down. Battery is brand new with only 2 cycles. While I can use the laptop with power connected, this is an issue that needs to be corrected asap, as I use this computer for performances consistently and if the power cord gets removed, I'm not in a good place.
Info:
MacBook, Mac OS X (10.6.8)
View 5 Replies
View Related
Jun 26, 2012
I lost the startup tone a couple days ago. I repaired permissions, did an SMC and PRAM reset and it makes the tone while doing the PRAM reset but the next time you turn it on it doesn't make a sound.
Info:
iMac, Mac OS X (10.6.8), 3.2 GB Dual Core
View 1 Replies
View Related
Sep 13, 2009
So I contacted Apple this morning regarding the LCD Backlight Bleed on my iMac (24", early 2008, 2.8 ghz) They made me reset the PRAM, which I figured wouldn't work, and the issue is still there.
They say it'll have to go in for servicing, and I live nowhere near an Apple Store, so they gave me the location of the nearest London Drugs. Am I going to get the same quality of service as I would from an Apple Store? And what is the exact process that they use, do they just replace it with a new LCD?Also, he said that it will be covered under Applecare unless it is ruled as accidental damage, he said that much of the time, the issue is caused by pressure on the back of the case, and that if that was the case, it wouldn't be covered.I can't really see how this would cause it, and I haven't ever put any pressure or anything on the back, but i did buy the iMac used, what are the chances of this being ruled accidental damage?I have the bleed in all four corners of the screen, if that makes any difference.
View 2 Replies
View Related
Jun 17, 2014
when i bootup the imac, it sounds normal but when i want to do the PRAM, after the second bootup while holding command,option,R. it sounds weaker and different than the first one.
Info:
iMac, OS X Mavericks (10.9.2)
View 1 Replies
View Related
Apr 22, 2012
For some reason (and I'm going to assume this only occured after I hit "software upate" a few weeks back) I can no longer ZAP my PRAM. Tried everything (inclding unplugging peripherals and connected drives) but to no avail. I can NO LONGER zap my PRAM. Any ideas why this occured and how to resolve it?
Info:Quad-Core Intel Mac Pro, Mac OS X (10.5.6)
View 11 Replies
View Related
Jun 2, 2014
Problem: MBP frozen on boot up screen with Apple logo and turning gear (which freezes after a while aswell)
Solutions attempted: disk repair via custom recovery- disk utility, PRAM
Device: MacBook Pro 15" (early 2010) running 10.9
Additional info-
Never had any issue with the device and this seems to have happened all of a sudden. Installed an SSD a few months ago, and just realised the ssd did not have a recovery partition. However I connected my older hardrive via USB to access recovery which seemed to work fine.
NOTE: for the past few weeks, every now and then I was unable to power the device off and whenever this occurred, there seemed to be a few bugs (ie unable to empty thrash-error 50 and enable to increase/decrease volume/screen brightness). However, holding the power button and restarting it seemed to have fixed it.
Had the same issue but this time around MBP failed to boot up.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
View 8 Replies
View Related
Jan 21, 2009
Hi everyone, I have a big problem. Today, I noticed that my Macbook Pro was running a bit strangely, with some video being slow and stuff, so I restarted it while it was in Windows Vista through BootCamp. I came back about ten minutes later to see a black screen, and the computer still on. I don't know if it restarted or not. I tried hard resetting it countless times, and messing with the battery like letting it run dry and stuff, but whenever I keep turning it on, I hear the "dong" boot sound, but the screen doesn't turn on, ever.
No I'm wondering if a PRAM zap will help fix the problem, but I really don't want to lose the hard drive and the stuff I have on it. I have a TON of school and work files on there that I simply cannot afford to lose. Will a PRAM zap kill my Windows Vista hard drive or should I even go ahead with it? I really hope that I can fix this problem myself, because the nearest Apple Store (and Geek Squad place that supports Macs) is over 40 miles away, and I really need the stuff for school on Tuesday.
View 3 Replies
View Related
Jun 17, 2014
I have a mid-2011 iMac (with Mavericks OS), and am doing a clean install before giving my computer to a relative. I performed a secure erase of my entire harddrive (using disk utility), reset the NVRAM / PRAM (but it only chimes once even after I tried several times), and now I get the grey screen even when I try to boot from CD, safe boot, or any other commands. I can't even get back into the disk utility.
On a side note, I have the install DVD in the DVD drive and I can't get that out.
Info:
iMac, OS X Mavericks (10.9)
View 3 Replies
View Related
Feb 6, 2009
I bought a new USB external HDD to install Leopard on and use as my new main Macintosh HD/boot disk. I formatted the ext. HDD in Mac Extended (Journaled) format. I then installed Leopard, made the new disk my Boot Disc, and quit the installer. Now, when my Mac starts and I type in my password (I am the only username), it keeps rejecting my password.
View 1 Replies
View Related
Aug 28, 2014
My name is David, I have a macbook pro 10.9.4. I want to reset everything totally. I have notice that the erase button eliminates the zero data function also the secure button.
Info:
MacBook Pro (Retina, 15-inch, Early 2013), 10.9.4
View 1 Replies
View Related
