MacBook Pro :: When Do A PRAM Reset They Prompt For Password
Mar 12, 2012when i do a PRAM reset, they will prompt me for a password or serial, may i know what password or serial is that?
Info:
MacBook Pro, Mac OS X (10.7.3)
ADVERTISEMENT
MacBook Pro :: Firmware Password Will Not Reset - Resetting PRAM Fails
Apr 29, 2012Firmware password will not reset. Resetting PRAM fails. Resetting NVRAM in Open Firmware fails. Resetting PMU fails.
Info:
MacBook Pro, Mac OS X (10.7.3), (MacBook pro 8,1)
MacBook :: Tried To Reset The NVRAM And The PRAM But Cannot?
Aug 9, 2009I have already covered these steps:1. I have tried a safe boot. 2. I have tried to reset the NVRAM and the PRAM.3. I have tried to reinstall OSX from the Install Disk.4. I have tried to repair the HD and tried to repair permissions using the Disk Utility. he issue started out as the flashing Apple/Question Mark Folder/"No" sign. I attempted to follow the steps on the Mac Support Forums (ones listed above) and the issue developed into the picture shown.
View 3 Replies View RelatedMacBook Pro :: It Won't Boot After PRam Reset
Mar 6, 2012I have a MBP 13inch from 2011
recently i zapped my Pram becuase i was having trouble with a external screen but when I turned it on again the screen when to the grey screen with the apple logo and spinning gear but after 2 hours of wating the screen is still the same. What can i do to get back onto my mac?
Info:MacBookPro, Mac OS X (10.6.8)
MacBook Pro :: PRAM Reset Not Having Any Effect
Sep 7, 2014I have inadvertently left my 2011 MBP running with a processor intensive music app running. The battery ran out before i realised.. When i attached the power lead to charge it, the computer automatically restarted without even pressing the power button. The computer had not entered safe sleep mode, presumably because my music software was still running.
Since then the computer will not ever enter safe sleep when the power runs down. The battery just cuts out each time when it drops to less than 5%, it does not run out at 0% like it usually does. if it is the logic board battery because i have had this issue a couple of times before but it rectified itself after a few days. I have checked that safe sleep is enabled which it is, but the computer just cuts out before safe sleep kicks in.
Info:
MacBook Pro (13-inch Early 2011), OS X Mountain Lion (10.8.5)
MacBook Air :: Why Have To Continually Reset PRAM To Boot
Dec 2, 2014Recently my MacBook Air has failed to wake from sleep mode. The Apple illuminates on the back of the screen casing, but neither the screen nor hard drive actually wakes up. The only way I'm able to use the computer is by forcing a PRAM reset on restart (command-option-P-R). I've had to do this several times in the last two weeks.
The only things about my MacBook Air that have changed in that time period are:
- I installed OS Yosemite
- I installed and ran Sophos Anti-Virus
(The latter was installed to counteract a problem that I was having with my email address having been spoofed and sending spam. Sophos found two bits of malware in email data files and "cleaned" them up.)
Info:
MacBook Air, OS X Yosemite (10.10.1)
MacBook Pro :: Reset SMC And PRAM - Still No Ability To Auto Sleep
Aug 22, 2010Today I noticed that my mid 2010 MBP is not automatically sleeping. I ran Apple's extended hardware test, along with TechTools Pro 5 from AppleCare disk. Both passed. Reset the SMC and PRAM. I'm still not able to auto sleep. Is there a way to see what exactly is causing my computer to not automatically sleep? Console messages or something?
View 7 Replies View RelatedMacBook Pro :: How To Reset PRAM/Start Up Sound Loud/Implications?
Jul 9, 2009I recently purchased a 13" 2.26 stock macbook. It's perfect, screen is good (no scrolling issues or purple blues) with no dead pixels, no slanted keys, and no scratches.
I updated the firmware that addresses the SATA 1.5 issue. After the update, I reset PRAM. I held down the buttons till I heard the second or third startup bong.
Here is where it gets funny.
Now, when I reboot or start up my computer, the start up noise is loud. Even with headphones plugged in and also the volume turned to its lowest setting (even with volume turned off). Eventually, to control the startup noise, I had to install the startupsound program in my system prefs as mentioned on other threads and that has seemed to control the startup sound.
I was wondering, if by resetting the PRAM if I have harmed my computer in any way. Should I be worried about deeper issues with my computer since the startup sound was not previously being affected by reducing the volume to zero with headphones plugged in?
MacBook :: Shuts Down When Unplug Magsafe - Reset PRAM / SMC To No Avail
May 18, 2012I have tried SMC and PRAM resets, and the issue has not been resolved. My magsafe is lit up with a bright green led. Battery status is "Not Charging." When I unplug the magsafe, the system immediately shuts down. Battery is brand new with only 2 cycles. While I can use the laptop with power connected, this is an issue that needs to be corrected asap, as I use this computer for performances consistently and if the power cord gets removed, I'm not in a good place.
Info:
MacBook, Mac OS X (10.6.8)
MacBook Pro :: Unable To Boot Past Gray Screen - Reset Pram
Jan 8, 2011My macbook pro won't boot past the grey screen, I've tried reseting PRam, running fsck from single user etc to no avail. All signs would point towards a hard disk failure, but the curious thing is that it sometimes mounts in disk utility when booting from the install CD, so theres a little life left in it yet! I have fairly recent backups of most of my files, but there are a couple I've been working on in the past few days that won't be backed up. So my question is this - is it possible to copy files from my mac HD onto a external drive through the terminal/disk utility while booting from the CD.
View 6 Replies View RelatedOS X V10.7 Lion :: How To Reset PRAM And SMC
Mar 21, 2012I am running Mac OS Lion (10.7.3) on a 8-core Mac Pro. As I turned on my mac this morning, I found out that I was unable to use my wireless mouse, and also that I couldn't open my bluetooth settings. Apparently, the entire module disappeared from the System Preferences, and when I went to one of the articles on here, I saw that I'm supposed to reset my PRAM and SMC in order to make my bluetooth work again. The problem is, that I don't know what PRAM or SMC are, nor do I know how to reset them.
Info:
Mac Pro (Mid 2010), Mac OS X (10.7.3)
Hardware :: No Sound And Can't Reset My PRAM?
Jan 20, 2009I have a 17" Powerbook G4 1.5 GHZ. I lost all sound from one moment to the next. System preferences says Audio output Headphones however no sound from Headphones either. I tried to reset my PRAM, however when I hold down "Option" "Command" "r" and "P" the computer won't restart. The hard drive seems to be stuck at this point and won't go any further. I went to the Apple store and the Genius lost patience and said we should send it out. (I'd rather not)
I have also reset the PMU
Everything else works fine.
I've looked at several other threads and post. Everyone with a sound problem seems to be able to get it resolved with a PRAM reset. However I find nothing on my the problem of not being able to reset..
Software :: Terminal Prompt Randomly Reset
Aug 26, 2010From time to time, my terminal shell prompt gets hijacked and set to something useless by another program or process. For example, it currently reads: "qtsoftware >" , probably from a QuickTime update, but I can't say for sure. Anyway, when this happens, I'm unable to reset the prompt to a customized version via .tcshrc -- instead, the unwanted garbage gets prepended to whatever I configure via .tcshrc. Restarting Terminal doesn't help. This obviously isn't the end of the world, but it's intensely annoying since, when I do need to use Term, I usually use about ten windows at once, and prompts matter.
my .tcshrc setting: set prompt = "%m [%/] What you say?"
my prompt: qtsoftware [/Users/kathleenduke] What you say?
Power Mac G5 :: Blank CDs Not Mounting -trying To Reset PRAM
Nov 30, 2007I have tried two different brands of blank CDR in my drive and both times, they fail to mount and in Disk Utility, show up as Sony DVDs (neither of them is a Sony or a DVD), but not writable. I have no problem with media that already has content. I've tried resetting PRAM, but nothing else yet.
Information:
Powermac G5
Mac OS X (10.4.10)
Mac Pro :: SMC And PRAM Reset - Keyboard And Mouse Delay?
Feb 25, 2008I tried the SMC & PRAM reset. Now, there is a delay in my keyboard and mouse. For example as I am writing this, as I type, I am observing a ~1/4 sec delay between me pressing a key and the GUI registering it. The same with the mouse. I can click-and-hold over say File and move it up and down over subsequent menu items and it the GUI doesn't highlight the menu item unless I slow down the movement.
View 1 Replies View RelatedOS X :: Reset PRAM For Network - Troubleshooting Steps?
Aug 15, 2010Can someone explain to me why resetting PRAM on a machine has any effect whatsoever for networking issues? ie; self assigned ip etc. I have noticed this is a common troubleshooting step that a lot of people are recommending for issues related to networking.
View 3 Replies View RelatedOS X V10.7 Lion :: Reset The SMC, PRAM Or Repair Permissions?
Jun 29, 2012When exactly do you need to reset the SMC, PRAM or repair permissions?
Info:
iMac, Mac OS X (10.7.3), iMac Late 2009
OS X Mavericks :: MBP Will Unable To Boot WITHOUT PRAM Reset
Aug 22, 2014Updated to OS X Mavericks last week. Ever since, it has been experiencing boot problems.
- If I restart my Macbook Pro (2011 13", lowest model), it will sit at the grey screen with apple logo and spinning grey wheel forever. I notice that my HDD is NOT running (no clicking / writing sounds)
- If I restart with a PRAM reset or holding down option to select Macintosh HD boot, the hard drive starts to run (I can hear it) and it boots successfully... it takes 5+ minutes to boot up. The grey screen with apple logo is presented on my screen for about 4 minutes, then the login screen shows up but I cannot move my mouse or select a login user for 30 seconds. After this, I can log in succesfully.
-Also, switching users takes 1+ minutes. Clicking "switch user" freezes my screen.
Info:
Mac Pro
MacBook :: No Password Set But Prompt Keeps Coming On Startup
Apr 20, 2012I used to have a password on my Macbook but I got annoyed of having to type it in every time I closed/opened the lid and the Macbook woke up. I got rid of the password through my system settings, but the prompt kept coming up when I opened the Macbook, but there was no password. I would just leave the password field blank and hit enter. Okay, no big deal. I just restarted my Macbook because it was lagging with video, and its asking me for a password to start up. I tried leaving it blank and just hitting Log In, the prompt shakes back and forth. I tried my old password before I got rid of it, the prompt just shakes. I don't have a password, why am I getting a prompt on startup and how do I get past it.
View 1 Replies View RelatedOS X V10.6 Snow Leopard :: Mac Chimes As If PRAM Is Being Reset When Restart
Apr 9, 2012When I restart my Mac it chimes several times as if the PRAM is being reset. Could this be telling me my internal battery is dead?
Info:
Mac Pro, Mac OS X (10.6.8), 8 core 9gb RAM
OS X :: Disable Password Prompt / Keeps Asking For Master Password?
Jul 18, 2010My Mac OS X keeps Asking me for a Master Password in my OS X ?? How can i stop this ? It is rather annoying to always type this in.....
View 24 Replies View RelatedOS X :: Properly Reset PRAM - Start Up Sound Before Releasing Button
Jul 19, 2009I understand the steps needed, but how many times should I reset the PRAM and how many times should I here the startup sound (in total) before releasing the buttons?
View 3 Replies View RelatedOS X :: Attempted To Reset The PRAM On Macpro Running Snow Leopard?
Sep 11, 2009I attempted to reset the PRAM on my macpro running snow leopard this morning, by rebooting and holding cmd-option-p-r until the apple logo appeared, at which point I released and then machine then rebooted a second time. I went back to the computer about an hour later and it was stuck on the apple logo screen, with no sounds coming from the CPU. I did a hard reboot by holding down the power key and it started up fine. I've never reset the pram before and so I didn't know what I should expect as far as the process being successful, but after an hour stuck on the apple logo I figured it got stuck on something.
View 1 Replies View RelatedSoftware :: Can't Reset Pram - Going Straight To Gray Screen And Starts Up?
Feb 25, 2006I have a G4 MDD Dual 1.42ghz, When I hold down the Command-Option-P-R keys during restart it doesnt do anything. It keeps going straight to the gray screen and starts up. I dont know what to do. Anyone know whats the problem? Also my computer cant wake up from sleep or even go to sleep all the way.
View 7 Replies View RelatedIntel Mac :: Startup Tone Lost - SMC And PRAM Reset Done But No Avail
Jun 26, 2012I lost the startup tone a couple days ago. I repaired permissions, did an SMC and PRAM reset and it makes the tone while doing the PRAM reset but the next time you turn it on it doesn't make a sound.
Info:
iMac, Mac OS X (10.6.8), 3.2 GB Dual Core
IMac :: LCD Backlight Bleed / Reset The PRAM Which Figured Wouldn't Work?
Sep 13, 2009So I contacted Apple this morning regarding the LCD Backlight Bleed on my iMac (24", early 2008, 2.8 ghz) They made me reset the PRAM, which I figured wouldn't work, and the issue is still there.
They say it'll have to go in for servicing, and I live nowhere near an Apple Store, so they gave me the location of the nearest London Drugs. Am I going to get the same quality of service as I would from an Apple Store? And what is the exact process that they use, do they just replace it with a new LCD?Also, he said that it will be covered under Applecare unless it is ruled as accidental damage, he said that much of the time, the issue is caused by pressure on the back of the case, and that if that was the case, it wouldn't be covered.I can't really see how this would cause it, and I haven't ever put any pressure or anything on the back, but i did buy the iMac used, what are the chances of this being ruled accidental damage?I have the bleed in all four corners of the screen, if that makes any difference.
OS X :: Password Prompt Before App Install?
Oct 12, 2010On my MBP, I get prompted for a PW before any program gets installed.
On my iMac, at times I get prompted, other times I don't.
I just downloaded handbrake and installed but there was no PW prompt.
The day before I installed a plug in for Quicktime and was prompted for a PW.
How can I get so that I get prompted for a PW every time before anything gets installed?
OS X :: Stop The Password Prompt?
Sep 24, 2009 this seems pretty basic, but I can't seem to find a way to turn off the password prompt in Mac OSX.
I have an account for my parents, and they don't need a password, but if they try and install software etc - it comes up with the Password Prompt window. Obviously, you don't enter anything into the password field and just continue on, but seeing how there is no password in the first place, why does it still ask for one?
I've been a Mac user for a few years, but have never came across this - I always use a password
OS X :: Screensaver Password Prompt Timeout?
Sep 14, 2007I have enabled the prompt for a password when waking from screensaver and this works fine as long as I respond to the password prompt quickly. However, if I don't respond fairly quickly then the password prompt disappears leaving a black screen with just the mouse pointer visible. No matter what I type I can't bring the password prompt back up and therefore can't gain access. The only way I can do this is to press the power button and wait for 5 minutes or so before bringing it back out of sleep and typing my password more quickly.
The machine is a new iMac 2.4G 24" if that makes any difference. All latest updates applied.
OS X :: Disabling Login Password Prompt?
Jul 9, 2008I would like to disable the login password prompt when I boot the computer. I cannot seem to find a way to do that.
View 7 Replies View Related
