I had some problems regarding my Hard Disk in a previous topic, I managed to fix the errors and format the drive. The disc seems ok but there is no OS on it.
And when I boot (in verbose or single user mode) it keeps freezing on:
Now this makes sense to me since the drive is empty but when I enter my Installation disc press ALT or C while booting it just freezes and does nothing.
I see the CD next to my hard drive and nothing happens, anybody had this problem before? What should I do, it's just a 5 months old iMac from the latest generation :/.
I have the latest MacBook Pro. I lost the CD that came with it. I'm attempting to reinstall Snow Leopard using a retail disc purchased from Apple. I've tried booting it by holding "C" and by holding "OPTION" and selecting the disc. I've also tried reseting the PRAM. It goes the the Apple screen and I can hear the disk spinning. Then it just hangs there.
Could this have anything to do with the fact that the computer came with 10.6.3 and I'm attempting to install 10.6 from the retail disc?
I got a problem booting from my DVD installation disc. I got a PowerBook G4 (1GB/133mhz) on which I currently run OS X 10.4. However, my mac has started to lag so I want to erase the hard disc and reinstall from scratch, starting with OS X 10.3. Now the problem is this: When I insert the installation disc, it first seems like it reads from the discs (saying: "preparing installation") but then this little device on the screen starts spinning. And this is as far as I ever get. The device doesn't stop spinning.
I'm having problems with a Boot Camp partition and XP Professional SP2.
I setup a 20GB partition on my drive (I'm using a MacBook Pro, 3GB, 120GB hard drive). It's the only partition other than the one I use for OS X.
I didn't have full-install SP2 discs, only an upgrade. So I went to Fry's and bought a legal, new OEM disc and license for XP Professional SP2, full-install. I ran the installer and all went well...until I rebooted. At that point, Windows wouldn't load giving me a non-system disc error.
My G-4 startup disc is full and now the computer won't start up. I am told to put a startup disc in the drive and restart from it, but I cannot get the disc drive to open. I have tried everything, including copying over to external hard drive. I read that if you hold the mouse button down, the disc drive will open, but this hasn't worked.
I am trying to reinstall Leopard on my MacBook Pro 15" 2ghz 667mhz but I don't have the discs for this model and I am using discs from a early 2008 MacBook pro 17" 2.6ghz 800mhz but it they don't work. I loaded the discs with the C button pressed and a pop up window says that they will not work on this hardware.
Ok, here's the deal. I just bought a 2.4 15'' MacBook Pro Unibody. I tried to wipe the drive and do a clean install from the system software installation disc that came with the computer. Three tries, failed each time. "Faulty disc" is what it said.
Well, I had to get a project done, so I borrowed same system software installation disc from a friend who bought the exact same computer on the same day. The disc worked fine! Leopard up and runnin'!
But I still called Apple to get a replacement disc. They said they did not recommend using another computer's disc to install. Well I'm thinking "dude, it's the same exact computer! So it must be the same disc?"
Anyone have experience with this? Should I wipe and reinstall AGAIN (NOOO!) after I get my disc. After a few days, it's been working just fine as is.
So I had an aluminum 2008 unibody macbook. I replaced the hard drive with a 320gb and it has leopard on it. I damaged it and had to get a new mac. I now have a white unibody mac. To copy every thing would be a pain. I'd rather use snow leopard. What I want to know is if I can use the reinstallation disc 10.6 that came with the white macbook to upgrade my 320gb leopard hdd to snow leopard?
I've got a blackbook which I've replaced the super drive with an hard drive (giving me two hard drives in total).
The primary hard drive is blank and I want to install Snow Leopard. My first thought was to use Remote Disc from my Windows 7 machine, but I'm not sure if this will work? I presume I need to connect to my windows 7 via ethernet cable, turn on the blackbook and hold control which gives me access to the remote disc?
Will this work or am I better copying OS X onto a bootable usb stick?
I tried to archive and install 10.4 Retail copy on my 17" iMac G5 which has 10.3.9. The installer checked the disc and said it had scratches or fingerprints so to restart. I did, cleaned the disc and tried again. I got the same message but chose to ignore it and proceed and the disc got 36% of the way and said it is damaged and to restart. But it's gone far enough that I have not got 10.3 any more and the ONLY way I can restart the computer is with this defective disc! Or a network but my other Mac, connected with ethernet that worked well, now doesn't see the iMAc any more. I also have an external CD drive , doesn't read DVDs. Right now I am stuck in the Startup Disk with a choice of endlessly restarting or shutting down. I shut down and it restarted from the disc OK.I checked the system profiler and under applications it shows only Disk utility,Installer,Network Ut, Open Firmware Password, Reset Password,Startup Disk, System Profiler. Under USB, it didn't recognize my external CD drive. Under Disk Utility I tried to repair permissions but it says it has no valid packages.
The person I bought the computer from sent me the Tiger copy discs and included 2 copies of Disc 1. I checked the second but it needs minor repair that couldn't be done with Disk Utility on my other Mac. But if I can somehow eject the disc that is in the 17" iMac (don't know how) will I ever be able to restart?
The power mac g5 starts up with the question mark folder thing. When I put in the installion disc in and hold down c, It has the apple logo and it gets stuck there forever.
My friend wants to install bootcamp on his 13" Macbook Pro but he doesn't have the discs that came with it. I was wondering if I could let him borrow my discs for my 15" Macbook Pro, or would that be a compatibility problem?
I have just installed a windows vista partition on my 17 inch macbook pro and when I insert the mac osx installation dvd in order to install the mac drivers the on the windows partition the d drive shows that something has been inserted but the cd has no name and whenever I try to click on it says nothing is on the cd. However when I insert the dvd in the mac osx partition it reads the dvd fine. Why is this? There is a scratch on the dvd but what difference would it make if the mac partition is reading it fine?
i am a Mac user for years and I have some experience with troubleshooting and fixing/reinstalling Mac systems unfortunately I feel rather hopeless at the moment since I wasted hours and hours on trying to fix my 4months old iMac (the 27" edition).
Ok so first of all, the problems appeared after some Apple updates, (it was a few months since my last update), I installed the updates and restarted my system and suddenly finder was broken, it just freezes all the time and I can't seem to open it and browse through my files and when I force quit it just crashes again.
The only thing I can is use spotlight to browse for something (note that applications like iTunes and Photoshop work perfectly).
Feeling desperate in this situation I tried to reinstall my Mac, so I inserted my Mac Install discs and pressed the ALT key while booting. The disc appeared but when I press enter my iMac just freezes and doesn't do anything. I tried a PRAM reset at this moment but that didn't do it either. I even tried different versions of Mac installs but with the same result. In the end I even tried to run my Discwarrior boot disc but it also crashes. So I can't seem to boot anything except my messed up Snow Leopard install.
Note that I also tried booting from an external hard drive but with the same result.
At last I tried booting in single user mode and I used the "fsck -y" commando but that gave me some Disc Errors.
Ok lets get things clear, I want to format my Macintosh HD and peform a clean install, what should I do ?
I bought a 2nd hand Apple MacBook about 18 months ago (via eBay). It is my first Mac. It did not come with its original OS X 10.5.8 Installation Disc/s and I now have one or more problems with my Hard Drive, so I need the Installation Disc/s.where I can buy the correct (genuine) version of Installation Disc/s for my MacBook?
I am trying to follow the following guide to do a triple boot, but I am stuck in Windows 7 installation triple boot snow leopard, windows 7, & ubuntu
I have done the following: 1. Did a clean installation of OS X Snow Leopard on hard drive (Not yet partitioned the hard drive)
2. Installed rEFIt I am not sure what the poster means by making sure it works by pressing the option button. I am assuming it means that I will be able to see the options I can choose when I press option? (I do see options to pick either "Hard Drive" or whatever disc in the DVD)
3. Partitioned 30 GB (or was it 40 GB? x.x I forgot sorry) space in Boot Camp Assistant for Windows installation. Chose the option to install Windows later.
4. Inserted OS X Snow Leopard installation disc and boot from there.
5. Opened up the Disk Utility and partitioned a hard drive (called Hard Drive_2) via the Partition section as instructed by the guide. Formatted in MAc OS Extended (Journaled)
So now, in that area I see "Hard Drive", "Hard Drive_2" and "BOOT CAMP" (so I am assuming that is what the poster meant by "3 partitions".
6. Restarted the computer with Windows installation disc.
Problems occur right here: Problem 1: I do not see anything called "C something" as the poster said. But I do see something called "Boot Camp"
Problem 2: All the partitions that are available says that "Windows 7 can't be installed". So my question is am I supposed to "delete" a specific partition to install it?
I have pictures of the screen which I will upload later if this isn't clear enough.
I've read many reviews saying that the remote disc installation takes 5-6 hours, so after loading the installation, I thought that I would leave it working through the night...
However the "time left" only showed 1,2 hours
In total it took me no more than 1 hour to get a fresh Mac OSX using Wlan...it's simply amazing in my opinion, I even don't know whether the external drive would have done it better.
So don't be scarde to reinstall it with remote disc guys, or waste money on the drive unless you really need it.
I got an iMac with Snow Leopard factory installed. I now want to update to Lion, but I'm not sure if, when I update, all my apps will still be there. I do have the app installation disc from Snow Leopard, will it still work in case the apps won't be there?
I've been having problems with iCal and would like to reinstall it using Utilities Disc 1 with the Superdrive. However, there only appears to be an option to reinstall ALL the bundled software, at which point I've aborted the reinstallation process. Sledgehammer to crack a nut! It's only iCal I'm having trouble with (e.g searches not clearing down, "today" button greys out.) If it's not possible to reinstall just iCal from disc, does anyone know a way to "repair or mend" a malfunctioning iCal?
When I try to open itunes on my Macbook Pro I get the following message: "The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes" -- I download, and then it closes and never opens and the process starts again when I try to open itunes again!
like a number of ppl, I only had a legit XP Pro SP1 and not an SP2 version as required for a seamless Boot Camp install. (Actually I do have a legit SP2 CD but the activation key has been mislaid!... damn). I was looking at going down the somewhat convoluted "slipstream" path to generate a working SP2 build utilising the SP1 key I had but what I have found is that the BootDir registry hack that had been used in the past for SP3 compatibility, also works for SP1 installs. Basically the problem is that the Apple supplied Windows drivers requires the Installer from an SP2 build and the SP2 update fails on a Boot Camp partition without the BootDir hack. So my suggested install method is as follows... ymmv. (Note this has been done with two identical MacBook Pro's with the latest Leopard build). Create the BootCamp partition as per the standard instructions and using your XP Pro SP1 CD going through the usual Windows install dialogs to the point where it want's to restart. I have found that when the Windows tries to shutdown to perform a restart that it hangs. Just hold down the power button on the Mac to force a shutdown leaving a minute or so just in case Windows is being slow. Boot back to Windows (via standard Boot Camp Option button) and perform the registry hack as published elsewhere for SP3 updates. Basically it is adding a key 'BootDir' with a value of 'C:' to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionSetup
Note that you need to be able to right click on the mouse in regedit to create this key and at this point without the Apple drivers installed I don't think trackpad supports this so I have used a generic two button USB mouse. Once this registry entry is added you can install the SP2 update (as downloaded from Microsoft - WindowsXP-KB835935-SP2-ENU.exe). Once again I have found that Windows still hangs after the SP2 install restart until the Apple updates are applied... so nail the power button again after a pause or two. Once you are back to Windows again you can now install the Apple drivers found on the Disk 1 of you Leopard CD although I would recommend downloading the latest v2.1 from Apple if not. (Note there is a minor update to v2.1.1 available through the Apple Software Installation program). I am not sure if you could go direct to SP3 using this method but I have tended to stick with SP2 as SP3 tends to slow bootup/shutdown. Most Mac users would use FireFox/Safari in preference to IE so you have already improved the security of XP
I am in desperate need of some help. I own a MacBook running OS X Leopard, I love the mac but I prefer the Windows for its compatibility.
I have a Windows XP Pro disk (But it is a copy) and I partitioned a space on my hard drive. I inserted the disk and it rebooted. Now here is the problem.
When Leopard boots up with the welcome tune, it stays at a grey screen. Only after a while the apple sign starts and it doesn't do anything from there. I left it on for a whole night and still, nothing.
I tried holding down the Option key when it booted up, now this is the only way I can start up on my Leopard OS. Then I tried booting it up from the Windows disk. The screen went black and it came up with this message:
"No bootable devise, please insert the disk and press any key..."
Am I doing something wrong? If I am please answer with a detailed response because I do need detailed steps to know what I am doing.
Trying to install Windows XP via Boot Camp, I get this error:
I have an external hard drive with enough space to back up my computer, but I don't know what to do after that. Can someone tell me what to back it up with so I can restore it after I format my computer, and how to restore it?
I assume to format the drive I use Disk Utility from my install CD?
how to make a boot camp installation with three partitions?
I mean one for mac, one for windows and one for data to be shared between the OS's? When I try to create 3 partitions on leopard installation, when I start the boot camp assistant, it doesn't work. Or when I create an extra partition inside windows, mac is not able to see it.
I have one program that I will have to run in boot camp. The rest of the time, I would like to run in Parallels. Will I have to install XP twice to do this and thus take up more hard drive?
I have downloaded the RC version of Windows7 64bits. I burned a DVD with 1x speed but when I tried to boot via DVD (pressing option key) it shows 2 option for DVD, Windows and EFI. I tried both and none worked. The Windows version starts and a DOS menu appears with 2 options which doesn't show what it is and then it freezes. The EFI option freezes imediately on the boot screen.
My problem is that when I try to boot to the XP installation disk, I get the very fast, flashing, gray apple, followed by a question mark folder, followed by the ghostbuster symbol, without the ghost.
The disc keeps spinning, but the windows installation screen never appears.
My leopard installation was giving me a lot of headache so I thought of doing a clean install. Now that Snow Leopard had been out for quite sometime and many issues solved; I thought of installing it instead of Leopard. All I did was follow the instructions to install Snow Leopard [the only option with Snow Leopard was that it did an "Archive and Install" kind of thing by default]. It did take a lot of time [1 hour?] and I was finally taken to my desktop. I looked to check if everything was okay. Though there was nothing spectacular about Snow Leopard. I shut the computer down. Today morning I get this and I can't boot.
