The hard drive in my Mac crashed recently so I have installed new hardware and need to format the internal drive to re-install Leopard. But when I try to either erase or partition the drive from Disk Utility, I get the Partition Failure : Input/Output Error message. Can anyone provide any advice on a fix for this or is it a OS error that I can't get around?
View 2 RepliesI'm trying to replace the hd that crashed in my macbook(it was 120 GB). I got a 250 GB SATA WD Scorpio Blue. When I enter Disk Utility, it shows like 1.8 TB WDC ... when I try to make a partition and name the disk it says Partition Failed Input/Output Error. The information shown when I select the disk is
Disk Description: WDC WD2500BPVT-00JJSTO MEDIA
Connection Bus: Serial ATA 2
Connection Type: Internal
Total Capacity: 1.8 TB (2,000,474,800,128 bytes)
Write status: Read/write
S.M.A.R.T. status: Verified
Partition Scheme: Unformatted
Info:
MacBook
i try to unzip something in Stuffit Exander its loads then i get this error shown in the pictureit happens evertime i want to unzip something, in this case Adobe reader
View 3 Replies View RelatedI am trying to format a hard drive that I put in an enclosure, I have two of these drives and the other one works, but when I tried to format the other one, I get an input/output error, I have tried to format it on a windows, and linux box, the windows says it formats it but it just well doesnt, and the linux box would display an error message, dont remember it though. This is really getting on my nerves, It will just freeze the mac, and I get the spinning beach ball.
View 2 Replies View RelatedSo I have an IDE DVD burner that I have inserted into my powermac G4. It has been taken out of a windows computer. The drive seems to work well other than when I burn a disc it tells me that it failed... However the disk works just fine. Thats not the issue the issue is the input output error that I am getting when trying to back up my OS X disc. I found instructions that have worked but it was a pain in the @$$ to do and I wasn't able to do it from my computer due to the input output error 0 that I received... The only thing that I can think of is that this is due to the DVD burner that I have used to read the disc?? Would that be correct? I was able to complete the back up from a friends powerbook G4 no problem.
View 7 Replies View RelatedI purchased a 32gb usb flash drive from ebay. I transferred some music on there, it crashed half way through transferring.
When I restarted and plugged it in, it didn't appear on the desktop. I went into Disk Utility and tried to erase it, I get the following error:
Disk Erase failed with the error:
Input/output error
So I then tried the following in Terminal:
diskutil eraseDisk HFS+ newdisk disk2
But got the following message:
Partitioning encountered error Input/output error (5) on disk disk2 NO NAME
Switched my Mac Mini (first rev PPC 2005 model) yesterday morning to find that the internal drive had vanished, seemingly. It was not mounted on the desktop(I boot from an external Lacie firewire drive as a rule. Went into Disk Utility and attempted to initialise the drive. Failed with and 'Input/Output' error.
Rebooted into open firmware as there was a DVD in the drive which I could not eject, was unable to eject the DVD using the Open Firmware command for doing so.
Began to assume the drive was completely Kaput and maybe also the DVD/CD drive as this had been acting up of late. New Mac time... Switched all my equip off at the plug last night as I turned in for bed and switched everything back on this morning and as if by magic the internal drive was there and I was able to eject the 'stuck' DVD. I have run Disk Utility a number of times and the drive appears to be fine. Also downloaded a copy of 'Smart Reporter' which shows it as being fine.
Partition failed with the error:
Could not modify partition map because filesystem verification failed
^ My windows bootcamp messed up so I deleted it and tried to install a new one but I get this message. Does this mean that there is something wrong with the hard drive?
I have a mac mini (solo intel) 10.4 OSX. I have no audio output when attaching an external input source like a CD player or ipod to the input jack on my Mac Mini. Audio output from ITunes or movies clips in IPhoto works fine. I have checked the cables and connections. I have checked the "sound" location in System Preferences to make sure the "built in output" source is selected. The input volume display shows that the audio input is being registered. I have checked "system profiler" in the Utilities folder in Applications to make sure the "built in output" AKA headphone outlet is recognized.
I have the "Soundflower" App. installed but turned off.
why the audio output from the internal sources like ITunes and IPhoto music clips work but the audio output from an external input source does not? Is there some software or a driver required for audio output from an external source that is not required for audio output from an internal source?
This is probably a silly question, but I was wandering if it was possible to pass audio from the line-in on a MacBook Pro directly to an audio output? I was thinking of buying a PS3 and connecting it to my external monitor, and thought I may be able to play sound through my soundsticks rather than buying more speakers (budget is an issue!).
I know this used to be possible in the "Audio MIDI Setup" application bundled with the system, but I can't seem to find the option in the new version (maybe something to do with aggregate devices?)
I recently had a cracked panel on an old Macbook Pro 15 inch (A1260) and just replaced it with a new one. Ever since i replaced it i have had no sound. Now i consider myself an experienced mac user so i have checked under my sound prefences and it doesnt list anything under sound input or output and things are grayed out. I also had the guy who replaced my panel, who is also my friend, check everything out and he hasn't been able to figure out why there is no sound. he gave me a usb midi device that shows up and works but when unplugged theres nothing.
Another thing that has started is, video online will stop every 11 seconds, and thats with me clicking on the bar when it stops playing after the first 11 seconds.
Info:
MacBook Pro, Mac OS X (10.7.4)
I would like to find a way or an app that would allow me to change the input AND output sound device with one click. I realize you can to ALT-Sound icon, but you have to individually choose the input and output.
The idea is this: when I switch to a USB headphone with mic, and would always want both the input and output to be the headset.
Info:
MacBook Pro, Mac OS X (10.7.4), Unibody MacBook Pro, 4GB Ram
I can feed sounds into my iMac with line input but no sound comes out vis internal speakers. I can record the input sound using Amadeus and play through gives me sound output. When not using Amadeus although input is set to line in and output to internal speakers no sound comes out. There appears to be some internal disconnection between input and output.
Info:
iMac, OS X Mavericks (10.9), printer, scanner, ATVs, external hard drives, USB DAC
I have this question about the MBA: on my MBP, the headphone jack allows me to use my iPhone headphones when skyping, i.e. it has input as well as output functionality. Does the MBA have the same feature?
View 3 Replies View Related I am about to buy a 15 in. MBP and I'll be going on a trip soon. I was wondering if there was anything I could get that would let me both use my mac as a tv for my xbox and use a tv as an additional monitor.
Something that would have RCA input/output (the red, white, yellow cords) and would connect to my mac with USB or hopefully firewire 800 (express card 32 would work as well).
how to find a way to change the input and output devices for sound without going into System Preference, and I finally got round to a little focussed googling and found this:
[URL]
Just today I have installed an application which was to do with sound switching , called "soundflower" once iv installed and run it there was an option "create multiple sound switch" did chose and start to creating a multiple, as soon as it started my sound card panel display as "no sound card founded" and my sound icon on the top bar turned to light gray.
Double click on that and when it opens you will see your hard drive (usually Macintosh HD) on the left. Highlight your hard drive and click on Verify Disk on the far right. If that is OK click on Repair Permissions on the left. If Verify Disk is not OK try to Repair. If Repair is successful then Repair Permissions if it is not successful let me know. But problem still remains.
Info:
iMac
I just got this new iMac that I got used and the sound on the computer does not seem to be working, I have tried doing what the computer tells me and going into System Preferences and selecting the sound option, but the sound seems to have been permanently disabled and shows that there are no output or input devices available, when clearly the monitor has speakers. whats more, is that the volume icon does not show up in the menu bar even when I select that I want it in the menu bar.
Info:
iMac
i want to change my audio out put in to input device for record my not stop mix
View 4 Replies View RelatedWhat to do to make my internal speakers show up as an audio out put/input option? How do I unmute with no options present?
View 2 Replies View RelatedI have my Xbox 360 sound out-putting through an optical digital cable to the digital input of my Dual 2.3ghz Power G5. My mac recognizes the signal but I was hoping I could somehow use the incoming sound to output through my headphone speaker jack on the front of my mac. Both my mac and xbox 360 use the same monitor.
I noticed it doesn't work that way. Is there a way to switch the incoming digital signal to route through my headphone port on the front of my mac? There has to be a way.
Information:
Powermac G5 Dual 2.3 Mhz
Mac OS X (10.4.10)
I was in Audio MIDI Setup and I clicked one of the checkboxes to add a device to something or something like that and all the devices vanished from the list and sound stopped working. After closing Audio MIDI Setup I am unable to open it again, even after restarting and getting all the updates. Skype now freezes and doesn't load. Sound preferences also have trouble and freeze up if I try to load them. I would really like to have sound from my computer again!
Info:
iMac, Mac OS X (10.7.3)
I have a problem about sound. It's no output or input device when I install parallel desktop 7. Is there any way that can solve this issue without uninstalling Parallel Desktop?
View 2 Replies View RelatedI had a 3,5 mm stereo jack in my audio output on my macbook, and it broke inside. Is it possible to redirect the sound output to go through the input jack?
View 2 Replies View RelatedI have a white Macbook, Intel Core Duo 2, 2 Gb Ram. (October 2008) Under Leopard, my volume (audio output is a shame); under bootcamp with Windows XP on the hard drive, volume is almost double: is there any work around on this?
View 3 Replies View Relatedwhile simultaneously using the real output jack? i'm slowly getting into mixing, and i would like to have my headphones plugged into my macbook's input jack, and have my external speakers plugged into my output jack. is this even possible to do?
View 2 Replies View RelatedI have just recently deleted my Bootcamp partition in Disk Utilities, and now im trying to increase the partition size of my Macintosh HD drive. When i go to the partition map and try to increase the size. The same error always appears. "Could not modify partition map because filesystem verification failed" I have attached an Image of what my partition map looks like right now.
View 2 Replies View Relatedcould not modify partition map because filesystem verification failed" I am trying to partition my hard drive to set up an XP system on it (I know, but it is for AutoCAD, sorry). Anyways, when I go into disk utility, and try to set up the partition, it fails. I have a newer uMBP, 375 free GB (trying to set up a 75 GB partition) and it just wont work. Weird. Nothing seems to be online about the problem.
View 11 Replies View RelatedI tried to partition my main drive and it failed, however it is now saying that 200 gb of space on my main drive is used up. The partition was only for 100 and I have no idea what happened.
View 3 Replies View RelatedI am using Bootcamp trying to install the Windows 7 and it went alright until rebooting and starting to install procedure. The computer cannot read my flash drive and finally ended up with installing failure. Then I tried rebooting several times and suddenly the bootcamp partition (with nothing in it actually) cannot be read.
I came back to OS X and tried to delete the bootcamp partition but after a while failed. Then I cannot see the Bootcamp Partition in Finder. In disk utility it became "Free Space (I'm using Chinese system and it shows "可用空间“ in both name and format)."
Cannot be deleted through the minus button, cannot be formatted, and all the options are grey (cannot be clicked)
In recovery mode (command + R) it remained the same.
I can normally use the other partition in Mac OS X.
How can I delete the unusable partition and regain the space? To combine the two partitions back together is the best choice but HOW?
Info:
MacBook Pro (Retina, 15-inch, Late 2013), OS X Yosemite (10.10.1)
