OS X :: Is It Possible To Remap The Volume Function Keys
Nov 9, 2007
How would i go about remapping the volume function keys on my old white apple keyboard to match the sequence order of the macbook's volume keys?
what i mean is how can i remap the volume keys above the numpad so they are used in this order: mute, volume down, volume up like on the macbooks for F17, F18, F19 respectively instead of volume down, volume up, mute like on the old white apple keyboards for F17, F18, F19 respectively. if it is possible i would then just switch the volume keycaps around to match the mapping.
i found this article about modifying the com.apple.symbolichotkeys.plist to change the expos� and dashboard keys link. it says near the bottom that it may be possible to remap the volume keys but the author did not know the values... damn so close! does anyone know the values for the volume keys or know of any other way to change them?
I have a new 15.4 2.53. I have a question, by default. When you press the key 2nd in on the top right, which is also volume up and f12, when you press it on its own, is it supposed to control the volume or control the f12 assigned in expose for example. Mine was working normally it was controlling volume as I expect it. Now all my top fn keys control fn if you press them on their own.. to control volume I have to press fn?
The volume and other function keys aren't working as they used to. The brightness key doesn't do anything and the volume key isn't working either. I've tried to fix it on system preferences but it didn't work. They're not set to be used like normal function keys. I don't know what is happening they were working fine.
I have a 2011 (?) macbook air and ever since my trip to the genius bar for a battery issue my function keys don't work after I wake it up (just opening screen). May also be related to last firmware update?
I have checked the function key mapping in settings and they are normal. The volume key launches Expose and the brightness keys (and others) don't do anything. A reboot helps but only untill the first time I put it to sleep (close/open lid).
Installed a new bluetooth keyboard today. Now my volume controls and other features on the F1 - F12 Keys do not work.Went into Keyboard Preferences and selected and deselected the [ ] Use All F1, F2, F3 keys as standard function keys. Regardless of the setting, the volume controls do not work. Even when holding down the [Fn] Key. I can adjust volume with the mouse ( new Magic Mouse ) using the control on the menu bar.
I run a lot of PC programs on my Macbook pro and Air using Parallels. Almost all PC software assume you have a home and end keys which you can combine with ctrl to reach the beginning and end of your document. e.g. Openoffice and MS office both, word and excel, and text editors (I program in both C and python). I have big spreadsheets that I cannot navigate to the beginning or end of sheet or even use extra functionality like arrow + shift + end to highlight a column. The lack of these combinations on the Mac make working in excel and / or OpenOffice a pain.
A read previous messages about using fn + left and fn+ right arrows, but these move me to the top of page /end of page I am currently in. Tried various combinations of cmd and alt with fn and arrows, non work.
I dowloaded keyremap4macbook, tried their various options but non work, even when running OpenOffice spreadsheet on the Mac, I cannot seem to be able to navigate straight to the upper left cell.
Previous answsers assumed the user is only using MS word and that is only an oddity of that software. I can assure you that almost all PC software has the assumption that you can go home/end and combine ctr home/ctrl end to navigate to top and end of document.
I'm switching from a PC to a Mac. I have a PC utility called "My Function Keys" that allows me to "program" the function keys to do a combination of keystrokes. For example, I can set up F9 to do a copy and F10 to do a paste, so I don't have to do the Ctrl-C and Ctrl-V, or I can set up F2 to type my address, etc. Is there a similar utility for the Mac? I did find some information at this link: [URL]. Which states: iBook: How Programmable Function Keys Work. This article describes the programmable function key operation for iBook and the PowerBook (FireWire) computers. The programmable function keys were created to help simplify common, everyday tasks performed on the computer.
You can use these keys to open a browser, an email application, or any other frequently used application or server by pressing a single key. To set up a programmable function key, open the Keyboard control panel. Or, if the keys have not been programmed yet, simply pressing one of them brings up a dialog box that leads you to the Keyboard control panel. Apple has preprogrammed F1 through F6 with such common control functions as screen brightness, speaker volume, and so on. F7 through F12 can be programmed for your personal choices. To help you identify what the function keys were programmed to do, Apple includes with iBook a variety of durable stickers with preselected icons. Once the keys are programmed, you can select the stickers that will best remind you of the assigned functions.
Note: The stickers should not be placed on the keycap itself, rather above them on the iBook case. To remove the sticker, use a fingernail or other non-abrasive tool to remove them and avoid scratching the plastics. The function keys F1 through F12 can be easily reset to have primary functionality. Simply open the Keyboard control panel and select Options. Then check the box that says Use F1 through F12 as Function keys. Note: Programmable function keys are not a feature of Mac OS X 10.0. So, it appears the iBook will do what I'm looking for, but not the iMac!
Does anyone know how to use the function keys while in Fusion? I'm using Autocad and need functionality of them while using it within Fusion, but they activate OS X functions. This, and enabling "pan" with the middle mouse button, rather than dashboard, seem to be the last two hurdles before I can fully use the Mac for my work.
I recently upgraded to Snow Leopard on my Macbook Pro (early 2008) and now my function keys are mixed up. My volume keys are now F3 and F4 for example.
I have already unchecked, �Use all F1, F2, etc. keys as standard function keys� as standard function keys� in System Preferences and it didn�t fix the problem. Also, under the keyboard shortcuts tab I have clicked the �Restore Defaults� button. This also didn�t fix my problem.
all the normal keys on my mac keyboard worked fine on friday when at work and i come in today and they are all messed up. how do i get them back to there defaults? Example, f12 now goes to the desktop instead of actually increasing the volume and f11 is the dashboard instead of decreasing the volume, etc. I am not sure if an update or something got installed or what. I have tried going into keyboard under system preferences and restoring defaults but that didn't work. I also tried powering the keyboard off and on and still a no go. I am using the bluetooth keyboard and running snow leapord.
I have a Mac os x with the Windows vista partition. I downloaded Realplayer to view some videos on both the windows and mac side. When I did the latter I realized that this was the problem; all my function keys stopped working, I cannot control volume, eject, brightness, anything. I have uninstalled Realplayer from the Windows partition and the problem persists. I have tried to look into the systems folder and drivers, but I really don't know what I am doing and I don't want to make it worse.
I just bought a new wireless keyboard to use with my iMac. My function keys at the top of the keyboard are not working and when I try and fix them in system preferences, I am unable to. There is no option to get the rewind, play/pause, fastforward, mute, volume down or volume up to work.
I'm wondering if there is any way to remap the Itunes fuction keys (Play/Pause, Volume, Prev, Next, etc). I'm not using an apple keyboard and the way OSX has re-maped the functions is really screwy, so I'd like to set them myself. Can it be done through iTunes or does anyone know of any application that will allow this?
My arrow keys do not function any more, when you press the down arrow key the whole page scrolls up, left arrow scrolls everything to the right and right arrow scroll everything to the left, and the up arrow doesn't do anything.
I've done a complete reinstall. I've downloaded the x64 drivers. I've tried everything, and yet my function keys (sound, brightness, eject key, etc) just won't work! They did work when I just used the original disc that came with my MBP. They all worked except the eject key when I only used said Leopard disc. So, when I tried the x64 disc, everything went kaput, including my sound. I have since got that working, but now neither my function keys, or eject key, are working. Can someone give me a step-by-step of what they might have done to get around this, with links?
Today I received a bluetooth Razr mouse in the mail today and went to connect the device as I would any other. Well when I was playing music in iTunes, the function keys to skip, pause, and every other function key does not work. The volume keys move my windows and pull up widgets. I dont know if the mouse has anything to do with it, but I imagine it doesn't because I disconnected it and the problem remains.
I bought a new MacBook Pro i5 yesterday to replace my MBP LED (2.2Ghz). The function keys on the new MBP kinda suck. I really want the one that does "Show Desktop". If you go to keyboard layout, it says that F11, F12, etc., are assigned, but seems it completely ignores them. What the F? Even if I could change the expose button to show desktop, I'd be very happy. I know you can use the 4 finger swipe, but that doesn't help while trying to drag something from the desktop into mail.
When I wake my Mac up from sleep, and attempt to change the brightness using the function keys, I see the brightness "image" pop-up on the screen, but when I try to lower it, the brightness doesn't change. The boxes quickly go down, but instantly go right back up to the original brightness. Running Mac OS X 10.6.4