OS X :: How To Configure Leopard As Ftp Server?
Nov 26, 2007I would like to configure my Leopard iMac as an ftp server. Could someone explain me (step-by-step) how to do that?
View 8 Replies
ADVERTISEMENT
Mac OS X Lion Server :: Configure Wiki Server On It?
Mar 15, 2012Right now I am able to view my Wiki data only through [URL] when I try [URL] I get a 404 Not Found. One thing that I think is interesting is that [URL] and [URL] both give me the "Welcome to Lion Server" page. I enabled the Wiki service and the Web service both through the Server application. My first thought was that I needed to configure a "Web Site" under the Web service to point to the proper directory location (such as in Snow Leopard Server). I've tried several different directories for the "Store Site Files In" field, such as "/Library/Server/Web/Data/Sites/Default" and "/usr/share/collabd/coreclient/public" to no avail. The Lion Server documentation shows how to migrate wikis, but I didn't see anything about configuring the service (either in the Wiki service or the Web service).Â
View 8 Replies View RelatedOS X Server :: How To Configure Permissions
Oct 8, 2008All of the permissions are setup as they were on my local computer. I need to reset the permissions so the server can manage them correctly. I have tried to do this via "get info" on the containing folder, via the server tools and via disk utility, but I have still not managed to correct the problem.
View 3 Replies View RelatedMac OS X :: Way To Configure SSL For Lion Server
May 25, 2012I am new to Lion Server and OS X in general (especially Terminal and all the Unix Commands), used to Windows Server where this is a basic no-brainer in IIS Admin Tools. How can I setup the Lion Server Wiki/WebMail/and other built in webpages to run over SSL. Not sure if Apache would support SSL Hostheaders like IIS does though but if not I have a few
I have a valid externally trusted cert, changed the host name to the external name etc. The router is forwarding fine but for my life I cannot find the UI piece where I can tell all the web pages to accept SSL requests.I created a Website in the Web Pane and pointed it at 443 and that works fine so I know the router talks to the right box
Software :: Configure VNC Server On MAC Machine?
Feb 12, 2009I want to acces my MAC machine from windows machine, so how do I enable or install this service? How to configure VNC server on MAC machine
View 4 Replies View RelatedMac OS X Lion Server :: How To Configure Mailserver
Feb 15, 2012how I need to configure the mailserver. I want to receive my mails from my ISP, gmail, hotmail, etc. on the mail server, where I can get them per IMAP to my Mac/iPhone/PC. Where can I set this up. I can't find/I don't know how to call my mails from e.g my ISP to get it on the mailserver. If it's working, does the mailserver call it from my ISP with POP?
Info:
Mac OS X (10.7.2), OS X Lion Server
Mac OS X Lion Server :: How To Enable / Configure FTP Service
May 16, 2012With Lion Server Apple killed the FTP Service & GUI to configure the FTP. In the NET I found plenty of description how to enable to ftp, but I found nothing how to configure the sharepoint and ftpusers with the command line. Is their any instructions around. We need to use ftp for some industrial machines we do not offer SFTP. We tried also the Rumpus FTP Server but this isn't stable enough.
Info:
MacBook Pro 17, Mac OS X (10.7.2), 8 Gb RAM, 750Gb HD
Mac OS X Lion Server :: How To Configure It To Update Other Workstations?
May 18, 2012I have a brand new Mac OS X Lion server. How do I go about setting up my Lion server to download updates for my other workstations (about 30). These workstations are mixed with Macbook Pros using 10.6 as well as some using 10.7, iMac's using 10.6 and 10.7 and Mac Pros using 10.7. What do I need to do on the client side as well so that they can download from my OS X server. I have created a DNS entry for my OS X server in my DNS as well as a static IP.
Info:
Mac OS X Lion Server, Mac OS X (10.7.4)
OS X Server :: Configure Client Side For Use ICal Service?
Jan 8, 2009I dont understand how configure the client side for use this service ICAL in my MAC OS X server - Server Admin
I open the ICAL Service Administration guide, but explain only how configure the Server ( security, users, etc) but when the client open ICAL, i dont know what to do.
In this moment I work with a published ICAL between my WEB Service ( because I dont know how work with ICAL Service), but the alarms and attachements dont appears
Somebody can explain me, how use the ICAL Service from Server Admin correctly in the client side? My config in MAC OS X Server is up
Mac OS X Lion Server :: Can't Configure Open Directory Master
Mar 4, 2012After a reinstall I can´t config Open Directory Master.
[code]...
Info:Mac OS X (10.7.3)
Mac OS X Lion Server :: Configure An Image With Default Set Of Bookmarks?
May 22, 2012Working on an image and would like to know if anyone knows how to include booksmarks that all new users that log in to the machine will have access to?
Info:MacBook Air, Mac OS X (10.7.3)
OS X Server :: Xserve Intel Setup - Unable To Configure Remotely
Dec 9, 2006My new Xserve started up and I was able to configure it remotely via Server Setup Utility then after I input all of the settings it hung on finishing the setup for about an hour. I then restarted the Server and now I cannot see it.
View 2 Replies View RelatedOS X V10.7 Lion :: How To Configure Server Or Mail.app To Show IMAP Subfolders With Mailboxes
Mar 26, 2012I'm sure we've all seen the weird IMAP glitch where mail subfolders appear down lower on the mail.app pane instead of nested neatly under the mailbox itself. Usually you can get around this by changing the Inbox IMAP prefix to "" or "INBOX" or "/" or some such path that the server recognizes as the root path to your IMAP folder. Unfortunately, this sometimes means you are unable to work with those folders or introduce other problems.Since I am running Lion (Client) and Lion Server as my mail host, I would think that there is an appropriate answer to this either on the mail.app client settings, or perhaps with a Lion Server configuration through DOVECOT. I don't mind if the solution is a command-line one, but I need to be able to easily set up my mailboxes so that mail subfolders appear properly under each mailbox, instead of being hidden away lower on the page where it is very inconvenient to find, especially when you are using multiple email accounts.
Info:
Mac mini, Mac OS X (10.7.2)
Mac OS X Lion Server :: Can Configure 10.7 To Have The Same User Settings For All Users Using Active Directory
Jun 21, 2012Adding 10 IMACS with OS 10.7 to my active directory domain. I would like for all users to have the same basic user settings at log in. how I can configure the MAC clients.
Info:
iMac, Mac OS X (10.7.4)
Hardware :: Manually Configure Airport Extreme For HP Mediasmart Server Remote Access?
Dec 28, 2009I have an HP EX490 Mediasmart Server that I'm trying to get Remote Access to work with my Airport Extreme (N/Giga version). Unfortunately HP doesn't recommend the Airport Extreme for Remote Access use since it doesn't support UPnP. I followed one guy's steps to manually configure the port forwarding to get Remote Access to work, based upon comments it works for some and doesn't work for others. I've provided screenshots that match his instructions, and I was wondering if anyone has had luck and are there extra steps since I have the latest firmware on my Airport Extreme? I really don't feel like buying another wireless router if possible, but if I need to, any recommendations that has a USB port so I can print wireless with my current printer?
View 6 Replies View RelatedOS X :: Configure Multitouch Gestures In SL/Leopard?
Sep 16, 2009Is it possible to configure Multitouch Gestures in SL/Leopard?
I know about the control panel but is it also possible to change certain gestures?
I don't use 3 Finger swipe for application switching and would like to change it to say "change spaces".
OS X V10.5 Leopard :: Cannot Configure Brother Hl-2150n
Feb 11, 2012I have Mac OSX 10,5,8 Leopard, and I had my computer working with the printer. One day it stopped printing and I tried to reinstall it, the result is that no longer works. It is connected to the home network through a router and certainly it is not a printer problem as my son can print wirelessly with his laptop. Mpreover, i tried to install it again and while my Mac allows me to load the printer driver from the disk or the web, once I go to the "printers and faxes" menu and click + to add a new printer, It does not appear in "My printers" menu or in the "By default" menu.
Info:
iMac, Mac OS X (10.5.8)
OS X V10.5 Leopard :: Configure Mail On G5 / Icloud?
Apr 16, 2012since i installed lion on macbook pro and using icloud i cannot use my local mail program on my g5.
but it is possiible to create an imap account (someone wrote me an email, but i lost it). who can tell me?Â
i think my old adressbook programm has no function for it is not synced with the icloud adressbook. is this correct?Â
i dont understand why a new software product like icloud ignores 'old' OS? is it really so complex to addapt the software. is idisk not a similar function?
Info:
PowerMac, Mac OS X (10.5.8), G5 PowerPc
OS X Server V10.6 Snow Leopard :: How To Setup Mac Mini Server As VPN Server
Apr 3, 2012currently using mac mini server for sharing files and folders. Would like to setup VPN to get access to files remotely.
-Model identifier: Macmini 3.1
-Mac OS X Server version 10.6.8
I am not sure if this version supports VPN.
Info:
Mac mini
OS X :: How To Configure Leopard To Hide File Extensions
Dec 18, 2008How do you configure Leopard so it automatically hides all file extensions? I've gone to Finder/Preference/Advanced and unchecked the 'show all file extensions' option, but it does nothing. To remove the file extensions, I literally have to go into each individual file. There has to be some way around this, but I'm new to OS X. As far as I can tell, extensions are showing for most (if not all) file types (e.g. avi, pdf, rtf, doc, docx, etc.).
View 15 Replies View RelatedOS X V10.5 Leopard :: Set To Using Dhcp And To Configure Ipv6 Automatically?
Apr 6, 2012I am trying to get an older Macbook Pro running 10.5.1 online and it is not working. I'm currently using 3 other Macs on the WiFi network all running Snow Leopard, so I know that network works. I tried renewing the dhcp lease and I have it set to using dhcp and to configure ipv6 automatically, and there are 2 ip addresses under dns servers (I typed these in because they showed on my other MBP). I can't even upgrade the MBP because I have no ethernet cable and can't plug it in to update it. I can do to get it to work?Â
View 5 Replies View RelatedMac Pro :: Flashed Sapphire 4870 In Mac Pro - How To Install Snow Leopard And Configure It
Aug 30, 2009I have a MacPro3,1. It currently runs 10.5.7, and I use it for development. I bought Snow Leopard on Friday, and I'm worried about installing it. I have a flashed Sapphire 4870 card running in addition to my 2600 XT (stock.) I made the BIOS with which I flashed the card using a python script I found on MacRumors.
I know the card works pretty well in 10.5.7. I have Dual-DVI, rotation support, and Quartz Extreme working. Sleep does not work (crashes the machine) but I'm pretty okay with that; I seldom sleep the Mac anyways.
I understand that to get everything working in Snow Leopard, I have to add the device ID to a .kext file that is installed with Snow Leopard.
I've found the device ID in System Profiler on this line:
Device ID:0x9440
Is this the right line to look for a device ID? Should I be looking somewhere else?
Also, on [URL], netkas says "just need to add dev-id into ATI4800Controller.kext." for my kind of card. How do I add the device ID to the kext? I think it goes somewhere in info.plist, but I'm not sure...
Will I still have Dual-DVI? It's very critical that I have it working, so I'd like to make sure before installing the new OS.
OS X Server :: Migration From Panther Server To Leopard Server?
Apr 6, 2009I'm faced with the daunting task of migrating from Panther Server to Leopard Server. The present server is the Primary DNS serving several web sites (some of which is running MySQL databases). I have the luxury that we've bought 2 new Xserves last year, but due to time constraints, I haven't time until now to seriously consider the steps to this daunting task. We're also currently using a linux box for the firewall (it does no routing, just iptables rules). I want to migrate away from this also and utilize either Apple's firewall or a router. Is there anything out there on the web that will help me in this process? I'm terrified of messing up the production environment, especially since the Xserve is our DNS.
View 5 Replies View RelatedApplications :: Correctly Configure Apple Mail (Leopard) With Gmail IMAP?
Jan 18, 2008Can anyone tell me how to correctly configure Apple Mail (Leopard) with Gmail IMAP so that you don�t have to keep a duplicate of all emails from the �All Mail� folder on my local drive? Basically, when Mail syncs, it downloads all messages, then it downloads them again because they reside in the �All Mail� folder in Gmail�s web interface. Any suggestions would be appreciated as this takes up twice the amount of space that it should.
View 5 Replies View RelatedOS X Server V10.6 Snow Leopard :: Push Login Script From Server To User Workstations?
Mar 22, 2012i have a domain controller and active directory based policy win 2003, one xserve running mac os x server 10.6.8 and alot of macs workstations. How can i push login script on all macs without adding it in login items? The script i want to store on smb or afp share disk, and will be edited from time to time. I've tried to add it on xserve from WGM, but it threw an error that current directory schema doesn't store desktop settings.So how can i solve this?
View 2 Replies View RelatedOS X Server V10.6 Snow Leopard :: ICal Server: Free/Busy And/or Availability Not Working?
Jun 14, 2012I run 10.6.8 server in a VM with Parallels Server for Mac. Lithium pinged me early Monday morning to tell me that my calendar server wasn't reachable. I found it had kernel panicked. After resetting it and verifying the directory structure and permissions, it booted fine. But availability or free/busy wasn't working for all users! The events were all there. Invites could be sent and received but when a user checks for availability when creating events. they see the daily work hours grayed out but not anything corresponding to a scheduling conflict. Â
Things I have Tried:
- bounced ical server
- Rebooted the server
- checked the owners and permissions for the data store hierarchy. (_calendar:_calendar 750)
- checked for xattrs on .ics files in several calendars
- deleted .db.sqlite for several users in several dir in their calendar stores
- in the past I have found that some iTIP invitations seem to get "stuck' causing problems with an individual users free/busy and deleting the inbox resolves this so I deleted several inboxes
-I moved a copy of the data store to a test server and pointed several clients at it.Â
The issue persisted in all of these cases without any change in behavior with one exception; somewhere (i lost track of where) during this process users also lost their delegation preferences. I'd love to find out how and where that is stored so that it can be restored in the future. It seems pretty fragile...Â
I found one way to restore the functionality; copying a users __uid__/<GUID>/calendar out. . Moving all the folders under <GUID> out of the way and dropping the .ics files into ical with their account configured in that instance. Although this worked for selected users, I have many, many users and calendars so this solution would be suboptimal. Â
Info:
Xserve, Mac OS X (10.6.8)
OS X Server V10.6 Snow Leopard :: Server-admin Lost Config After Restart?
Apr 6, 2012my problem is that on a restart of one of my 10.6.8 Servers parts of the Serveradmin configs are gone while some of them persists. The lost configs are everytime the same: VPN (complete) and iChat (a secondary but very important Host-Domain). Of course a can restore them from a backup but that shouldn't the standard procedure after a restart....Â
View 11 Replies View RelatedOS X Server V10.6 Snow Leopard :: Server Loses Active Directory Binding?
May 15, 2012I am running an open directory/active directory network. Authentication is from the Windows server 2003 active directory. It has worked fine until the last month. Now clients stop authenticating & when I check the AD plugin it says network accounts are not available. I can force the server to unbind, then renew the binding & everything works great.Is there any work around or fix for this other than upgrading the windows server to 2008?Â
Info:
OS X server, Mac OS X (10.6.8)
OS X Server V10.6 Snow Leopard :: Software Update Server Not Working After Change Location Files
Mar 14, 2012I had a goodworking SUS (10.6.8) working but the drive is getting full so i change the location of the files to another disk (in the xserve)and follow instructions from Apple (page 84 from the manual System Imaging) sudo cp -p /private/var/db/swupd/html /Volumes/My_Volume/My_Software_Updates_Folder/This works and i copy the files to a new drive. I also change the SUS so that theu host files for Lion clients url..works also, start SUS in Server Admin but when clients wants to connect i get an error that there is no SUS available and when i use the browser for an check i get een Forbidden error url...ForbiddenYou don't have permission to access /index.sucatalog on this server.Apache/2.2.21 (Unix) Server at 127.0.0.1 Port 80.
View 1 Replies View RelatedOS X Server V10.6 Snow Leopard :: Software Update Server / No Original For Index.sucatalog Alias?
Jun 28, 2012Trying to set up the Software Update Server under 10.6.8 Server. Have everything set up properly as per Apple's documentation, but all clients error out on software updates (saying they can't find the index. sucatalog file). When you view this file, which is an alias, within the HTML folder that is created when you enable the Software Update service in Server Admin, the alias doesn't link to an original.I've tried this on two separate 10.6.8 Server installations and I get the same error on both machines.Where is the alias "index.sucatalog" supposed to point to?Software Update Error Log in Server Admin says "Symbolic link not allowed or link target not accessible" and points to the alias file.
Info:
Mac mini, Mac OS X (10.7), Xserves (Early 2009, Early 2008, G5), Mac Pro
