I have a new 13" macbook pro and i'm trying to install windows on it at the moment. I get to the part where it asks be to insert the second installation disc, but i can't figure out how to eject the cd. I tried holding down the button on the top right corner but its not working.
View 5 RepliesI want to install Snow Leopard on my Note Book after inserting the DVD for about 10 second it eject it back, I try with another Mac Book and its appear on my screen, so the DVD is not damaged any idea how to resolve that.
View 5 Replies View RelatedI just finished up a fresh install of Windows 7 and downloaded and installed the NVidia driver from their site directly since the one in the Boot Camp files is pretty old and technically the Vista driver anyway.
But I still need the Brightness, Sound, etc key functionality. Is there a way to selectively install Boot Camp drivers? That's the only one I need. The wireless, chipset, video and everything else works just fine (and in some cases better) than the ones included in Apple's setup.
I have a mac pro with two optical drives, I have no problems ejecting both drives in osx.
Option+Eject works fine. What is the key combo in windows?
Everything I've tried just open/closes the bottom drive. I've tried numerous searches with no results
I installed Parallels, & then installed Windows XP. How do I eject the Windows XP CD.
View 3 Replies View RelatedAs of this minute I'm in the process of installing Windows XP via Boot Camp on a Mac Pro. The problem I ran into is that the install CD I have is for an upgrade to Win XP. Since the installer can't find a previous version of Window, it's asking for a install CD for the previous version. I do have a Win 2K Pro install CD, but I can't eject the Win XP CD from the Mac Pro drive to put it in.
View 24 Replies View RelatedI used boot camp assistant to create a partition and install windows xp, but my cd key isn't working so I need to eject the disc. However, since my macbook keeps booting to the windows install program i have no option to eject the disc, does anyone know a way to hard-eject the disc?
View 3 Replies View RelatedI installed windows 7 ultimate. 64 bit into my early 09 unibody macbook pro (2.66, 4 gig, 512 mb 9600gt) everything works fine, but when i go to eject my snow leopard, it will not eject by either pressing the button or by right clicking the icon in my computer. it will say "an error occurred while ejecting dvd
View 3 Replies View RelatedI just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
View 1 Replies View RelatedDoes anyone know how can i install Vista home premium on my imac? ive been using boot camp to do all the steps but im stuck at where i should choose NTFS format partition had disk. Seems like mine is FAT32.
This is what ive done;
1.Open up bootcamp assistant
2.Partition, divide equally(116GB each)
3.Insert Vista disk and start installation
4.Install Vista and insert CD key
5.custom installation
6.Now this is where i stuck
I have 4 options, and i should choose the last one which says bootcamp 116gb, but i cant click it since it says the disk need to have NTFS format. How can i set so that i partiton it to NTFS?
I'm running 10.5.1 and Windows Vista Ultimate x64 on my Mac Pro. I just installed Vista, and then just taking a random guess, I decided to insert my leopard disc into the Windows OS, and sure enough, it showed up as "boot camp" and installed a whole bunch of drivers. Is that how it's supposed to be done? I couldn't find another way to get drivers into Windows.
Anyways, the volume keys work, but the eject key doesn't. Is there any way to make it work?
I am trying to set up a Parallels 4 VM for a Windows 7 x64 Build 7000 boot camp partition, but parallels tools will not install. Half way through the process, a windows unsigned driver security box pops up, and when I tell it to install anyway, it still rolls back the installation process and I get the message "An error has occured while installing parallels tools, click OK to restart your computer and try again." or something to that effect. I have tried this about 15 times, and I have tried uninstalling/deleting the VM and re-creating the VM to no avail.
What I want to know: Is there a way to manually install Parallels Tools while running in the boot camp partition, just like installing any other application? I want to install it outside of Parallels, since for some reason it keeps screwing itself up when trying to set up the drivers as a VM.
I Have my 15" macbook pro 2,4 Ghz 2G in RAM, with Snow Leopard, bootcamp and vista running for some time (about a year or so) and every thing has been going ok. Last night I made a clean windows 7 installation. All went good, installation, let windows 7 make his updates, I put Snow Leopard disk to make macbook pro drivers updates and I installed all the program I need including Norton 2010 Antivirus.
All went smooth and easy untill I activated Windows 7 with Daz Windows Loader 1.6.9. After a few seconds It said : Everything Ok, Windows is now activated and your machine will reboot now. After that, it gets out of the desktop to the closing window and suddenly I get the blue death screen. I have to manually press de power button to shut down my macbook pro.
I reboot again and after getting the safe mode screen stuff i just keep with Start Windows normally. It starts well again, but now each time I want to reboot or shut down my MBP I get again and again the blue death screen. And I�m sure i will get it while working soon.Is it probably because I did all kind of updates before running the Daz Loader (including programs and antivirus software)??
I have a 15" MBP. Hardware in my sig.
I'm getting Win7 this week. I'm getting it free from school and unsure at this point whether it will be 32 or 64 bit. That said, here's what I want to do with my setup.
1: School. I have to use Office 2007 for my classes. Office 2008 for Mac is not supported, because some of the formulas that you create in 2008 won't convert correctly into 2007 format and I can't have that. I will also use IE due to the fact that neither Firefox nor Safari will play my Mediasite classes correctly in Silverlight. Only IE allows me to speed up the playback. I am going to use Parallels 5 for this.
2: I game, but not much. The one game I love and will definitely put on my Mac is Morrowind. I want to use Boot Camp for this reason.
Soooo, I have been told that if I'm going to install Windows under Boot Camp that I should do that install first. Then install Parallels. I'm really not sure how to do any of this. I understand that I will only need to install Windows a single time and that it should work under with Boot Camp or Parallels.
i have the Boot Camp install PDF from the Apple site, but I'd love some tips, tricks, help, advice, words of wisdom, etc., from this forum. Please tell me what you think about which to install first, what approach to take, how much HDD space I should partition when I install under Boot Camp, etc.
Not sure if this should be here but anyway. I am trying out Parallels to run Windows 7. I installed windows 7 on a partition of a second hard drive but couldn't get Windows to start up and finish set up so I went to parallels. Parallels is using the partition I created that contains Windows 7 of course. My problem is that I can't get my CD/DVD drive to eject when I press the eject button. This happens as soon as I launch parallels - from that point on the eject button has no effect. I installed parallels tools; I have sound and internet when using Windows but I have no way of ejecting the disk tray. Any suggestions. Is there an alternate command that can eject the tray like some other hot key or something? What am I missing?
View 2 Replies View RelatedI installed windows xp on my macbook, only problem is I installed Windows over mac os x. So now when i turn on my macbook it loads windows xp from the start and the right click button and the eject button on the keyboard dont work. So now i am trying to reinstall mac os x and i cant find my os x disc, so i have leopard on a flash drive and i cant install it, and i have mac os 8 so i was going to try and install that and then open my flash drive and install leopard, but it wont boot, I help every button on start up and nothing works.
View 13 Replies View RelatedIn Windows, I have to go to Folder Explorer, right-click the CD/DVD drive and select EJECT. That works -- but is there a KEY combo as done on the Mac side?
Info:
Final Cut Pro X, Mac OS X (10.7.1), Mac Pro
I am trying to install Windows 7 on my 24" iMac. But the DVD drive it playing up and is not accepting the CD. I am wondering if there was a way I could use my Macbook to install it over Firewire or something similar ? Even USB ?
View 3 Replies View RelatedI just installed Windows 98 SE in the VMWare Fusion Beta (latest update), and it seems to work very well, except the fact, that whenever I ask it to install the tools, no setup windows pops up, as it says there will in the help file. I also tried Google, but noone else seems to have the same problem.
It really is a big problem, as I can't have a resolution above 640x480 and more than 16 colors, which prevents me from running my retro games like RCT and Theme Hospital.
I'm trying to install the 168.81 ForceWare drivers for my 9600M GT (256MB) in Windows 7 x64. The drivers from Boot Camp on the Snow Leopard DVD installed fine. I want 168.81 because I always like to have the latest drivers for everything.
Anyway, when installing it, it says something about not having the required hardware and it won't install.
Is the Boot Camp drivers the only way of having the latest drivers.
I'm having some huge problems. I have an .iso of Windows 7 Ultimate but my whole problem is that my macbooks dvd-rom drive crapped out on me a year ago so no burning no reading and Disc Utility wont let me restore the iso onto an external hard drive.
Does anyone have any idea what I could do to fix this? Is there a way I can put the image onto the hard drive at all?
perhaps I am doing something wrong? I wanted to install Windows XP on my iMac. I previously had partitioned my Mac drives. I backed everything on these drives to my external and blew the partitions away creating my one Mac drive again.
I then ran Bootcamp, created a partition and installed XP. Everything was fine. I then partitioned my main drive and got the warning message about Bootcamp maybe not working afterwards. So I finished partitioning my Mac drive as I wanted and now I don't have the option of booting into XP through Bootcamp. When I try it just shows the Mac drive as my only boot option. I see the XP Bootcamp drive in the System Preferences startup disk area, but I assume I did something to the partition once I partitioned my Mac drives
I would like to install a game for windows on my recently new iMac. And I know how to boot windows and everything from experience with my macbook, but my problem is basically this; When I try to install multi-disc games on the windows OS, whenever I get to the point where I am supposed to "insert disc 2" the eject button on my keyboard will not work, is there any workaround for this, I am running XP... (and leopard on my iMac).
View 3 Replies View RelatedGot a new 27" iMac recently and am trying to set up Boot Camp. I partitioned the HD and then installed Windows XP. The installation went smoothly, and then the computer restarted. Only problem is the Windows XP system disc is still in the CD drive. Now the computer wants to boot from the CD and can't. I get a message that says, "Press any key to boot from CD. Disk error Press any key to restart", and I have no way to eject the disc. (There is no pin hole next to the CD slot that I can put a paperclip in to force it out.) I've tried restarting and then hitting Command + Option + O + F (found that advice at Apple's site). No joy. Apple support is closed for about the next three hours
View 19 Replies View RelatedI'm not a total newbie with mac and computers in general, but I cannot get the one and only super drive to eject... yes, I have hit the eject button, it shows the eject icon in the screen and nothing...how can I get the thing to eject?
View 17 Replies View RelatedI rarely use my superdrive, so I thought it might be more practical to have the button eject my external hard drive(s). Is there a way to do this through OS X or a third party app?
I've been having problem with either Firefox or Safari and I download something and the dmg extracts and I'm left with the white casing shell where the app is housed and it won't eject. I can't eject it from finder but dumping it to the trash from finder took it off the sidebar. I can't get them off my desktop unless I restart my Mac.
I've noticed now that along with disk images not mounting for me anymore. My external drive images or DVD's won't eject either.
When I use right click with Mighty Mouse I don't even see an option anymore to eject that image. Is there any solution out there to fix this glitch? The work around I'm using is unmounting or ejecting images or disks from Disk Utility.
Why is this happening and how do I fix it? I'm using Leopard 10.5.2 and am on an intel iMac.
How to eject an installation disk, the eject button won't work?
Info:
MacBook Pro, Mac OS X (10.6.6)
So I got windows 7 installed on my 2010 mbp but when I went to install my windows drivers via my Mac osx disc I realixed I couldnbt find it.
Is there anyway to install all the drivers/apple software without my OSX disc? If not, how do I go about getting a replacement disc from apple?
