OS X :: File Transfer Between Macs / Set Up Network Connection With No Password Protection?
Jun 22, 2009
Gah, internet is messing up, logged me out I have to rewrite my whole long message....when transferring between my new MBP and ibook G4 on 1st startup.... it asked me to connect by firewire. Idon't have a firewire that has 1 side the new firewire connector and the other side old (I didn't even know that the shape of the firewire had changed). I tried to do it wirelessly and it said it was going to take 106 hours so I stopped it to use my computer.
Now I am trying to transfer again. I don't have a firewire cable that will work. I have an ethernet, but when I try to connect to my computer server (through ethernet or wirelessly) it says that I don't have sufficient privileges. My password (which I am sure is correct) DOES NOT WORK and I don't know why. I tried to disable all security so I can get in with no password, but nothing I do is working.
Any ideas?How can I transfer my files? How can I get back to that transfer wirelessly screen that occurred at start up? Migration Assistant only gives me a firewire option. Is there a firewire that will connect between old and new firewire models???
How do I set up a network connection with no password protection? (Or why isn't my password working?)
I'm trying to use Apple Remote Desktop to connect to multiple Mac's on a remote network. I've set the remote network's firewall/router to open up the ARD-specific ports for all the computers I want to connect to. I've also set each computer to accept Remote Management. On my ARD however, when I enter the network address of the remote network I'm trying to get to, I can only see ONE of the enabled computers, rather than all.
Is there anyway to ensure that when two Macs are File Sharing with Firewire that they use that connection rather than the network connection? Anytime I connect I can't tell how I'm connected until I try to transfer a file and it says it'll take fifteen minutes. If I turn off my airport it'll then use the firewire and transfer in seconds. Is there anyway around having to disable wifi to get it to use the wire?
Also, how do I turn on file sharing for just one other Mac? I just want to be able to share the files on the Mini with the MBP, not any other computer on the network.
Have recently done a clean install of Lion onto a Mac Pro that was running Snow Leopard. Upgradede to 10.7.3 The Lion Mac sits on an office network of several macs running Snow Leopard and a Network Shared HDD. In order to gain quick full access to the other computers we have been using "connect as" then inputting the macs registerred user administrator details, we were able us access to the full Mac and it's currently mounted hard drives. Since installing Lion I can see and fully access the network share which only uses guest access, see the Other macs in finder, add to their drop boxes but not connect as a registerred user to access one of the snow Leopard machines. I get a pop up. Spinning wheel, and eventually a timeout. Can't even cancel this action as it comes up greyed out. Oddly the other macs can still log into the Lion machine. No joy so far toggling network preferrences and I'm pretty sure it's going to be a setting I have missed, So far have had not joy looking online or playing in seeing why it would now not be able to connect as before.
I need help setting a password protection that would be activated when there has not been use for 30 sec. My kids have gotten on when I was working on important files and now many are missing.
I have password protection enabled on my operating system so that I can lock the computer, and also so that a password has to be entered after the computer has been sleeping or has been closed. However, when starting the computer from being powered off, no password is required.
My question is: if the computer is in sleep mode or is closed, if someone powers it off and the turns it back on, will they be able to bypass the password protection?
I know I can set the computer to ask for a password before logging in after startup, but it seems that if the computer is in a password protected sleep, that the sleep image would make the computer remember that it was password protected, and would prompt for a password before logging into my account.
I do things like adding ram swapping Hdds. but am not really god at the software part. I got a costumer with a lock macpro that does not has the password. I know it sounds suspicious but hey he is just another costumer. I am getting the machine tomorrow so i need TO KNOW IF is possible to just put a Leopard disk and restore it? or will i have to do thing further like Formating the HDD or swapping and put another clean one to install OS X on it?
I use Time Machine to back up my data and am very satisfied but have one problem with it. Is there anyway to password protect the backed up data or even the entire external hard drive?
My user account is password protected but it appears as if anyone who has physical access to my external hard drive can access all of my information. If this is the case, how can I protect my data?
I have a time machine back up of my mac on an external hard drive. If this HD was stolen/lost would an avergae joe be able to access the data. i.e if it was plugged into another computer would all my files be accessible.
I use a password to login to my admin account and i'm the only user account.
Do i need to add some protection to my external? I realise that a clever mac user could get around any protection.
I have downloaded Open Firmware Password.dmg at the link provided in the article. Anytime I try to open it, a message comes up: "The following disk images couldn't be opened: Open Firmware Password.dmg, Reason: legacy image should be converted."
The internal modem in my PowerBook Pro (mid 2010) shows up as "not connected" in the Network pane of system preferences, but I can't figure out how to get it to connect. When I enter my phone number and click the connect button, I get an error message: "Network Connection The communication device selected for your connection does not exist. Verify your settings and try reconnecting." Say what? It says it exists in the System Preferences, shows it in the list on the left. How can it not exist?
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?
Info: MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
I was looking to buy an iomega hard drive because of its portability and firewire. Here's one I found on amazon at a discount : http://www.amazon.co.uk/Iomega-500GB...9149335&sr=8-1
Everything seems fine but for something so portable and easily lost (or stolen/misplaced) as well as carrying my entire mac backup (docs, photos, videos, etc.), I think password protection or some other security feature is essential nowadays.
Does anyone know whether the imoga hard drives have password protection or not? If not, are there any other hard drives with both firewire as well as good security?
I have MacBook Pro 2.4GHz Penryn 15". OS X Leopard, 6 months old.
In trying to add up to a wireless network at home (with a PC and a laptop Windows XP) I switched to "start from network" on System Preferences. On reboot, shows image of file with a ? or flashes a world clip. Usual command+S or C, Alt, attempt to reboot from CD fail. Before attempting anything else I don't want to lose my documents. When reboot with Alt, the padlock with space for password appears. I didn't set a password when I installed OS.
I am running version 10.4.11 of OS X and would like to find software that will allow for password protection for a folder(s) on an external hard drive used with my MAC. I want others to be able to access most of the files on this drive however. Setting multiple users with passwords will not accomplish what I am looking to do.
Here is my setup: DSL Modem bridged to Airport Extreme 802.11n (Older Model - not dual band) 1 PC Running Ubuntu - Ethernet into Airport 1 Mac Pro 10.5 - Ethernet into Airport 1 Macbook 10.6 - Wireless 1 Macbook Pro 10.6 - Wireless 1 PS3 - Ethernet to Airport Express/Wireless
For some reason, all of the Macs on the network are having bizarre connection issues with particular websites, and I cannot figure out what the cause is. The main culprit is google, and any google related site including youtube. For instance, if I go to my gmail, many times it will not get past the initial "Loading" page you normally see for only a second or two. If it gets past that, the subjects of the messages will load, but where my chat and calendar normally show up it just says something to the effect of "Failed to Load" in a gray box. With youtube, the video pages will load, but instead of the video there is just a giant black box where no video ever loads. The same thing happens with other video sites like hulu, cbs, abc, etc. I can refresh the page a bunch and eventually it will load, but it takes a long time.
Oddly enough some sites, macrumors included, seem to have no issues loading at all. This is true on all of the Macs, whether I use Firefox or Safari. I would say it's my connection, however the Ubuntu machine has no problems whatsoever. I can check side by side and the Ubuntu box has no problem opening pages that the Macs are just choking to death on. It takes ages on the Macs just to load the youtube homepage, but it is up in seconds on the Ubuntu machine. I assume the PS3 is fine as well - I don't use the browser but have had no problems with the online features of the PS3. I've tried switching to OpenDNS, which actually made things worse (Google pages just stopped loading altogether). I've flushed the DNS cache, rebooted everything numerous times, disabled all plugins/extra apps, reformatted one of the machines (I needed to go back to 10.5 anyway) and just nothing seems to work.
I have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
My notebook is about to arrive and I'm trying to learn how to connect two macs to a single internet connection. I'm starting from scratch, really -- I'm learning what a router / switch / ethernet are! Ideally, it would be nice if I could keep my existing cable connection to my Imac and install a wireless connection to my notebook. But I don't know if it is possible and how to do that. I've not found clear advices on such installation, yet. Also, since I'll move in June, I searching for the cheapest solution.
I'm getting the new MBP to replace my Black Macbook. This is backed up on an external HD through time machine, but when i get my new mac i want to be able to transfer only my music and photos and videos to the new machine. How can i do this? The guy at the apple store said a combination of Ethernet cable and a program called 'SuperDuper' will sort this out? Can anyone attest to this, or does anyone have a better method?
I have Photoshop CS3 installed on my Macbook 13", but it's beginning to lag (old model) and I've now got a 27" iMac. Is there any way I can transfer the app from the old computer to the newer one?
I did migration assistant when I first bought the iMac, but for some reason Photoshop wasn't transferred (although a number of other Adobe apps were so I don't know why that should be). Either way, I'm well beyond repeating the whole thing. I just need transfer advice for this single program.
I have two macs and strangely one mac is unable to connect to the internet via airport while the other one can via airport. What gives?What I'm observing is that when I open up Network Preferences in both macs, the Airport says its connected on the working one while it says no IP Address on the one that's not working.
However, when I change locations so that both macs have the same locations, the one that's not working says, Self-Assigned IP, yet, still no connection.One more thing, I also notice that in advanced settings under TCP/IP, both macs have two different IPv4's.
So my network is now exclusively Mac, yet in the sidebar in the Finder all my network Macs show up twice, but the 2nd one always has the BSOD icon. The MyBookWorld is my NAS drive that always shows up as a windows server because it has to connect via SMB. Anyone have any idea how to get my Macs to show up only once though? Besides it looks ugly with all those BSODs on the side,
I guess the answer to this might be iChat, but I've got two iMacs on my home network. My wife and I work on them, usually at the same time, and it would be great if we could just open a quick chat window to swap small files, links and bits of text back and forth as we work. At the moment we use the Finder and copy, paste, drag, etc. But there must be a quicker way. Back in the olde days there used to be a network message thing you could use. I guess iChat would be easiest if we both set up a login each and keep it running in the background?
I am using a dsl wireless router to create a home network (damned if im gonna pay 2 bills for a japanese cable router) every time I connect, the internet service provider intercepts my link and forces me to log in, when I try to log in on another computer it does the same thing, but I can only log in one computer at a time on the same user id.
Is there a way to split the connection from my wireless router to each mac without the service provider recognizing it is two separate machines? This is legit, if I shell out the 2 bills for their wireless router I can log two machines in, so its not like im stealing service here, just trying to get my wife and I on at the same time without having to buy new hardware that is redundant.
I have a MacBook (Intel 1.83 GHz Core 2 Duo) and an iMac (2.16 GHz Intel Core 2 Duo) and I can access the entire MacBook's file structure when I access it via the finder's "connect as" feature. I could do the same thing when I connected with the MacBook to the iMac, but a couple months ago I stopped being able to do this. One notable difference is, when I click the "connect as" button on the iMac I get a dialogue box that lets me enter the username and password. On the MacBook, I get no such dialogue - the finder simply tries to connect (spinning wheel in the bottom of the finder window, "connecting..." displays above the button) but it never seems to time out or stop. I have checked the sharing configuration on both machines, and they seem identical - I can't find a single setting that is causing the disparity and therefore the one-sided connection problem.
After quite a few searches online, I also found some advice that suggested I delete old keys related to this in my Keychain and use the Keychain Manager to repair all the existing ones. I did this, re-started the machine, and still no joy. All permissions have been repaired since I did this - no difference. While I suspect this is a system issue, I doubt it - the system has been re-installed completely off the same disc as the iMac, and is running the same latest revision of 10.5 as the MacBook. There seems to be no real difference - and as you can see from this email, I can connect to the internet on the same network, and have no other problems - I can even Screen Share with the iMac (which seems stupid, as it lets me completely control the iMac from the MacBook, but I can't access the files directly and run them in the MacBook.
I have a network of around 13 emacs, they're connected via ethernet to a router with a dhcp server. The emacs can browse the internet without problems, however they can't see each other in the network. I have activated the file sharing service, checked the permissions, but I still can't get them to see each other.
I've searched and don't see anybody else with this problem. I tried to set up an ad hoc network on my MBP so I could use TouchAble with my new iPad. But now I can't get my MBP (or iPad) to see my home wifi network.
(TouchAble is a music performance app on the iPad that controls Ableton Live on the MBP. It works on an ad hoc network so the combo will work on gigs without depending on local wifi.)
I set up a new network ok, with a password. The iPad saw it, but before I tested it further I wanted to make sure I could reinstate my regular network. So I tried switching back to the regular wifi. No dice! The MBP sees the network, but I can't log in. It acts like the password is wrong. Same on the iPad.
Yes, the network works. I didn't make changes to the settings in my router, and my iPhone still sees it with the same password.
I tried a tip I found online and deleted the network preferences file (com.apple.smb.server.plist) and rebooting. No dice. (The system didn't write a new one, as I had expected; I had to reinstate it from the Trash). I rebooted a few times, both MBP and iPad. Nope.
What's going on here? 1) How can I get my MBP to see my network, so I can switch back and forth from the ad hoc to the local network. 2) Ditto for the iPad.
MBP is new. All systems and versions are up to date. No other funny stuff with the network--it's been stable for two years. Everything is stand-alone; this is in my home office. I'm the admin. (But I'm not a techie, so if you start talking about IP addresses and subnet masks, please be clear what I should try.)
