OS X :: Dettol Wet Wipes On Macbook Surface

Sep 13, 2009

I got my 13" macbook pro about a month ago and have some concerns. Because my palms perspire excessively sometimes, my keyboard gets too sticky for comfort and the trackpad loses its smoothness and traction. To get around this problem, I have been using wet wipes/wet tissues to clean the surface of my macbook, particularly the keyboard and the touchpad. I sometimes use a damp cloth too. I never thought about this until I realize that there are crevices beneath every key on the keyboard and water can theoretically seep through. I have been wiping my macbook about once every day. 1. Will this have any adverse effect on the keyboard or the touchpad? 2. Even if water does seep into the thin crevices, would this corrode the interior or create rust? Will the water reach the other parts of the macbook interior, like the processor, graphics processing, DVD, RAM, etc.? 3. Yesterday I ran out of the standard wet wipes that I usually use and in place of those, I used a Dettol wipe. To my horror, it produced quite a substantial amount of foam, and I quickly wiped the blotches of foam away using tissue paper. Will my keyboard and the interior be affected in any way? I am typing this new thread on the same macbook and there are no noticeable problems, yet. I may be paranoid, but I wish to be sure. 4. Will accidental wet wipe contact with any of the periphery sockets, like the USB and firewire, lead them to malfunction in any way?

View 3 Replies


ADVERTISEMENT

MacBook Pro :: Just Cleaned The Screen With Wet Ones Wipes. Is This OK If It Was Only Once

Feb 29, 2012

Cleaned my screen with a wet ones wipe. Is this ok if it was only once. Saw after that I maybe shouldn't have.

Info:
MacBook Pro (13-inch Early 2011), iOS 5.0.1

View 11 Replies View Related

OS X :: Clean SL Install Wipes Out Firmware Updates?

Sep 8, 2009

I am planning to clean install SL on my macMini. I've applied firmware updates as they became available under the "Check for new software" (under the apple). Will I have to reinstall the firmware updates, and how do I do that and how would I know which had to be updated?

View 2 Replies View Related

MacBook :: Sticky Surface - Something Like Wax

Nov 16, 2010

This may sound silly, but the sticky surface of the new MacBook really bothers me. I'm wondering if anyone else feels this way, and whether using something like wax might make it just slippery enough to be closer to the MacBook Pro. Any suggestions?

View 3 Replies View Related

MacBook Pro :: Clean Surface Of It?

Jul 1, 2012

I have a retina mac book pro (I think model doesn't matter).  My question is how to clean the surface when it gets dirty. Like to use what kind of cloth and maybe some special cleaners and etc.

Info:MacBookPro

View 5 Replies View Related

MacBook Pro :: Clean Surface Of Keys?

Nov 5, 2010

A couple days ago I accidentally spilled lemonade all over my room. I didn't think I had gotten any on my keyboard, but apparently I did, as some of my keys are now sticky and really hard to press. Is there any way that I can 'unstick' these myself, or do I have to take it to my nearest tech store? (fyi my keys are most sticky under the keyboard and not on top of them). The computer is a 2010 MacBook Pro. Also, is there a way to clean the surface of your keys? I'm not too thrilled about the way they look right now and I would like to try and get them back to what they looked like when I bought it.

View 5 Replies View Related

MacBook Air :: Someone Spilled Coke On Surface Of The Top?

Feb 18, 2008

I showed no emotion and people were asking me why lol. I really had it bottled up. The guy smacked his soft drink with his hand and it spilled onto my closed MBA. Thankfully it only made a puddle on top (like 30% of the surface of the top) of the MBA near the apple logo. Couple drops spilled off to the front right of the MBA, so just along the edges did the coke touch. Nothing inside on the screen, keys, or trackpad.
I went straight to the closest bathroom and found this foam soap and paper towel. I wanted to get any remnants of the coke off, so it wouldn't get sticky or do something to the aluminum.

View 24 Replies View Related

MacBook Air :: Wobbles On Flat Surface

Apr 28, 2008

Today I discovered that my MBA wobbles while on a perfectly flat surface. Has anyone had this problem? I bought it in early March. It is driving me nutz while typing! I keep it in pristine condition. It doesn't even have a scratch on it and is always in it's WaterField sleeve in my messenger bag.

View 8 Replies View Related

MacBook :: Makes Click When Put On Surface

May 20, 2009

My Macbook is just over a week old and when I put it down onto a surface it makes a click noise which sounds to come from either the superdrive or somewhere around there! It sounds like a mechanical noise not something from the speakers! Is this normal or should I get it looked at?

View 7 Replies View Related

MacBook Pro :: Scrapes / Scratches On Surface

Jun 30, 2009

I just noticed after a few weeks of using it it has these perfectly evened scratchings over the top casing even though i primarily use a wireless keyboard. im not sure if its from anything specific. i dont wear sweaters, have any bracelets, or wipe it with wool. i just had n iKlear cloth on it thats about it. i doubt im going to complain about it to apple but i was wondering since it looks like it was ingrained into the actual aluminum perhaps its in the design or fabrication of it? i just noticed it in bright natural light but otherwise cant even tell its there. this is the only other discrepancy with the umbp17 i have aside form the oily key wearing.

View 10 Replies View Related

MacBook Pro :: Touchpad Surface Not Smooth

May 29, 2010

i bought a brand new mbp yesterday, and i just realized that the touchpad's surface is not smooth. when i touch there is a tiny sharp barrow. it's very tiny but since it's on the touchpad surface, it's really bothering me. do i have i chance to change the computer?

View 10 Replies View Related

MacBook Pro :: Not Laying Flat On Surface?

Jul 21, 2010

I realised the lid dosent align well with the base then i went to put my macbook pro on my desk and noticed that the computer dosent even lay flat! it rocks from the bottom left to the top right very noticeably this isnt a picky problem, the laptop should lay flat anyone else have this problem?

View 9 Replies View Related

MacBook Pro :: Screen Wipes Out With A Screen?

Apr 16, 2012

I have a MacBook Pro version 10.5.8 and it keeps crashing like The screen wipes out with a screen that says please restart your computer

Info:
MacBook
Pro

View 2 Replies View Related

MacBook Pro :: Overheating While Playing On A Soft Surface

Sep 10, 2010

As you can probably guess, it happens while playing a game (Starcraft 2). It's only happened when playing on a soft surface (in bed, on a pillow, etc.). The simple answer would be to simply not use it on these surfaces, but it seems illogical that you WOULDN'T be able to use a laptop. . . . on your lap.

View 11 Replies View Related

MacBook :: Full Surface Keyboard Cover?

Feb 4, 2009

I'm looking for a keyboard protector that will cover the entire surface area of the keyboard, not just the keys. I've seen them before, I just can't remember where. Anyone know what I'm talking about?

View 1 Replies View Related

MacBook Pro :: Static - Free Surface For DIY HD Upgrade

Jul 7, 2009

So thanks to the info on this forum, I think I'm going to take the plunge with a new internal HD. My question: what do you use for a static free surface when you actually open the thing up and do the upgrade? I'd hate to zap my machine in the process of improving it. I've upgraded the RAM with no problem just on a table top and I've also upgraded the hell out of an old G5, but this is the first time I'm really going inside the notebook.

View 6 Replies View Related

MacBook :: White Unibody Surface Smudging

Jan 10, 2010

I have a 15" unibody pro, and when it's all cleaned and polished it looks absolutely stunning but quickly it becomes covered in smudges, fingerprints etc. It shows every little spec of dirt. It drives me insane, I'm constantly trying to clean it. It's so bad I'm considering selling it and buying a white one unless the white one is just as bad. From what I remember owning an older white macbook, it's wasn't as bad.

View 7 Replies View Related

MacBook Pro :: Rougher Surface On 2010 Model?

Apr 18, 2010

Anyone noticed that the new MBPs have a rougher surface compared to the 2009 ones?

View 2 Replies View Related

MacBook Pro :: Shuts Off When Moved Or When Not On A Flat Surface

Apr 6, 2012

Having an issue with my MacBook shutting off when I pick it up off my desk and use it on my lap or some other non-flat surface.  On some occasions, when I take it off a flat surface and shake it a little, the screen shuts off and goes into standby mode.  When I can wake up the MacBook, there is a low battery indicator even though it has a full charge.  On other occassions, it does not wake up and I have to press the power button to restart or reboot.  My MacBook is about 1.5 years old and works fine on a desk. 

Info:
MacBook Pro, Mac OS X (10.6.8)

View 1 Replies View Related

MacBook Pro :: 15" - Trackpad / Keyboard Rougher Surface?

Feb 20, 2010

So after buying my 15" MBP to replace my 13" Unibody Aluminium MacBook, I noticed that the aluminium arm rest - trackpad/keyboard enclosure section feels much rougher on the 15" than the 13". It's not an issue, I'm just interested to see if anyone knows why this is.

View 6 Replies View Related

MacBook Pro :: Matte Display And Continuous Glass Surface

Jun 8, 2010

Has anyone else out there ordered and received the MacBook Pro with HD Matte finish? Today I received my new MacBook Pro (the brand new 15" with 8Gigs RAM) with the HD display matte option. I was surprised by the silver bezel but have discovered that is normal. What I am not as sure about is there is no longer a smooth surface glass enclosure. (The silver bezel sits deeper in the enclosure and the screen a bit deeper still - there is room for a glass overlay.) This likely makes sense because of the antiglare, but I wanted to make sure. I guess I'm used to the old MacBook Pro 2.8 with the continuous monitor surface. Can anyone out there verify that I am not 'missing' the glass enclosure?

View 8 Replies View Related

MacBook Pro :: Trackpad Surface Not Parallel To Body Of Laptop

Jun 21, 2010

My Macbook pro's trackpad isn't parallel to the body of the laptop. that is, one end of the trackpad (left) is higher than the other (right). This creates the interesting effect of being able to slide ones finger off of the left side of the trackpad and onto the area below the keyboard with almost no resistence. while on the right side you feel a ledge if you try the same motion.

View 5 Replies View Related

MacBook Pro :: Internal Surface Protector (palm Rest And Around Keyboard)

Sep 4, 2010

I am trying to find a palm rest like the one that Zagg has. I want to protect the full internal surface of the MBP 13� (palm rest and around the keyboard). Is it possible to find one of those without the other stuffs that are coming with it? I was also interested about the moshi palm rest but protect only the palm rest area.

View 3 Replies View Related

MacBook Pro :: Surface Scan SSD Using Techtool Deluxe Provided With Applecare?

Oct 12, 2010

Like the title states. i have a 256 GB Apple SSD and i wanted to run techtools to see if everythign was up to par. i wanted to know f a surface scan will harm or is even necessary?

View 2 Replies View Related

MacBook Pro :: Aluminum Surface Finish - Rough Palm Rest

Sep 7, 2009

I recently acquired a MacBook Pro from Apple. Its the 15" Unibody model. Upon opening it, I found that the surface of the palm rest has a rough finish to it; kinda as though it didn't go through the final polishing stage or something when it was manufactured. This rough texture feels very uncomfortable to my hands when I type, in comparison to the normal "soft" feel and texture to it that I've experienced with other Unibodies. Has anyone else experienced this with their Macs? If it matters, I got mine from a California distribution center because I got an exchange. Wasn't sure if that had to do with anything, but the seal had been broken once (but resealed with another) for what I presume was to insert the Snow Leopard drop-in DVD. I was assured it wasn't by a manager from customer support, but the computer almost seemed as though it was a refurbished model.

View 4 Replies View Related

MacBook Pro :: Keyboard Leave Traces On Screen Surface / Having High Pressure On Computer

Dec 16, 2010

I'm planning to buy a 17" matt MBP 2010. So far I've used a few laptops which I carry in a backpack (Lowepro Computekker Plus AW) together with cameras and lenses. Each one but the last one - Lenovo Thinkpad - had the same problem; beacause there is high pressure on the computer (glass weights over 12kgs), the keyboard keys left traces on he screen surface - not just dust - the plastic from keys was on the screen for good. The Lenovo is the firsts one not affected by that.

Can anyone who uses this MBP 17" matt 2010 (and treats it as bad as me) tell me how it looks in this case?

View 6 Replies View Related

OS X :: Is There Protective Film On Top / Touch Surface

Mar 18, 2010

Question, I just got a new Magic Mouse - is there a protective film on the top/touch surface that it ships with? I can't see an obvious layer to peel, but the top surface feels very "sticky" vs slippery as they do in the store, making it difficult to swipe or scroll effectively.I just don't want to pick at the mouse senselessly and scratch it if it really doesn't have a film layer on it.

View 1 Replies View Related

Hardware :: Desktop Mouse Surface For Use?

Apr 28, 2010

I'm currently using a Razer ExactMat (dual sided aluminum with plastic coating mouse surface) and a Razer Diamondback laser mouse. I recently picked up a Apple Magic Mouse since I wanted multi-touch capabilities. My problem is the Magic Mouse works like crap with both sides of my current mouse surface (the accuracy and speed coated sides). It feels like there is too much friction and the mouse is 'scraping' instead of gliding on the surface. The Razer mouse has 3 plastic pieces that the mouse glides on while the Magic Mouse has two long plastic bars. Does anyone else encounter this problem and could recommend a better mouse surface? I'd rather not use my desk if I don't have to.

View 4 Replies View Related

IMac :: Horizontal Lines Across The Surface Of Monitor

Aug 7, 2010

I have an Apple iMac 20" 2.16 GHz Intel Core 2 Duo. I work on photos in Adobe Photoshop CS4. Am running Snow Leopard 10.6.4. Am getting thin horizontal lines across the surface of the monitor. Reduced the resolution of the monitor from 1680 x 1050 to 1344 x 840. For a while, it was better but the lines are back again. Any idea what is causing this problem? Is it software, a setting on the computer or maybe a problem with the video card? Hope it is not a bad video card.

View 1 Replies View Related

IMac :: Magic Mouse Surface Work Like Trackpad?

Jan 8, 2011

Just unpacked my new iMac, the keyboard and mouse are powered up, paired, and discovered. BUT, I thought the "magic" of the mouse was that it's flat surface is supposed to work like a MacBook's trackpad. MINE DOES NOT. It just scrolls around, up and down within a window. Other than that, it works like a regular mouse, just move it, point and click. Is this right? Or did I mess up already? I called AppleCare and they say this is normal, but for what I paid, it should do more magic.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved