I have a 2005 iMac G5 with iSight that I would like to connect to my HDTV. I have seen sites that say to get a mini dvi to dvi cable then dvi to HDML to conect to the hdml on the TV. Do I need a separate audio cable for this or does the dvi carry audio too?
I would like to connect my IMAC to my tv. I tried using a home network, but the samsung tv I have does not recognize most of the files, plus the internet apps suck big time.(only netflix is kind of good) So I was then thinking to get a mac mini and just but ay 1000$ it doe snot solve my needs. So I am looking for something to wireless stream the video from my imac to the tv. So it would mini dvi to hdmi - then box with HDMI input to stream to another box with HDMI output connected to my tv. It would also need to stream the audio. Is there anyway to just use the network connection and just hack into the tv?
I'd like to use the "Bose Acoustimass� 10 speaker system" [URL] for iTunes music out of my iMac and somehow be able to switch the audio over to my T.V. whenever to play Xbox and watch movies through it as well.
I just replaced my HDTV with a new Sony Bravia 32EX500 (Full HD, 1080p). My previous TV (HD Ready, 720p) was linked to my 2008 iMac with a VGA cable (with a mini-DVI to VGA adapter on the Mac end). It worked perfectly fine, but I can't get it to work with the new TV. Could you please tell me what resolution, frequency, and colours I should use to make it work?
Please not that I do not want a HDMI cable. I know it'd be better and easier, but my computer is quite far away from the TV and an HDMI cable of that length would be way too expensive. I'd rather find a way to make it work with the existing VGA cable. I just need to find the right settings for that VGA input. The TV doesn't recognize the signal right now.
I am looking for a solution to getting a larger monitor/TV from my 2011 Macbook Pro. I know the airplay software is supposed to launch this summer... but is there a standard cable I can get in the meantime? I do video production with my mac and need a larger display. $1000 is a bit steep for the apple display..so thinking a HDTV would be more versitile anyway..
I tried the Mini Display Port to HDMI and also a VGA cable. Both gave me a look at the cyclone from the desktop but I can't get it to go any further - cursor is not active on the TV.
i am trying to connect my Mac Mini to my 860 Samsung Series 8 HDTV. I am using a DVI to HDMI connector into the DVI port on the back of the Mac Mini. I have plugged the HDMI cable into the back to the Samsung in the HDMI/DVI port. When i which the source to the correct HDMI input i either get a message saying "no signal" or, sometimes briefly, "mode not support"
How can I wirelessly show macbook pro content on my HDTV (i.e. mirrored from macbook to tv). I currently have it wired, but would like to do it wirelessly.
Have just bought a Macbook to HDTV HDMI connector cable from the Apple store in MK - plugged in to Macbook & connected other end to TV & get great playback picture but no sound!
Getting an "Invalid Format" message from my new HDTV (Vizio xvt553sv) when I connect my mac mini. This is a big deal, because the Mac mini is the front end for all my movies and music, which have been digitized. We watch all of our movies on the HDTV through the Mac Mini. So we are movie-less until I get this working.
My Windows 7 laptop shows on the HDTV fine. My mac mini shows on other monitors fine. Some kind of incompatibility between the Mac and the TV. Anyone run into this and have some suggestions?
I have tried all of the TV manufacturer recommended resolution x timing/Hertz settings on the Mac Mini.
Mac Mini model 1.1. , RAM 1.5GB, snow leopard OS, connecting to TV with DVI to VGA connection. (TV only has VGA, HDMI and Component connection.)
I've got a 2007 generation Mac Mini and a 720p Proscan HDTV with a VGA input. When I hook it up and crank up the Mini, the apple logo appears (on the standard gray startup screen), but when the OS starts to run my TV loses the signal and a message pops up that says "Not Support!" How can I fix this? Better yet, can I fix this? Are they just not compatible? I ordered a DVI to HDMI cable to give that a shot, but I've got a feeling it's not going to work.
I want to connect 2 HDTV's to an Apple iMac to extend the desktop, I have a mini DVI to HDMI cable but wanted to know if I the set up will work with 2 TV's if I buy a HDMI splitter and have two cables that run to each TV.
The first time I connected to my HDTV using a mini displayport-dvi and a dvi-hdmi adapter, it worked flawlessly. Stupidly, I set my TV to a resolution it couldn't support. Now the screen only turns blue until System Preferences eventually crashes and the TV gets no signal.
I've tried clearing my PRAM, deleting the profile in the colorsync folder, and even deleting /Library/Preferences/com.apple.windowserver.plist out of desperation. I've confirmed that it's not a problem with the adapters by successfully getting another HDTV to work. Where could could OS X be storing the display's settings?
I just ordered the 27" iMac. Trying to figure out the best way to do output to TV. There 2 approaches I would suspect.... but since the 27" display signal is 2560x1440 (HDTV can only go up to 1080p).
I don't know of any adapter or TV that can support this resolution. Will the signal come in only partially displayed
1) Wireless
Atlonas - HDAIR wireless usb to HDMI/VGA with audio
pros+: one connection for audio and video, usb, easy setup, hdmi out, wireless cons-: reported sucky framerates, max res is 1440x1220 (720p), not mac compatible (so will req bootcamp/vmfusion/parallels - windows).
2) Wired
Would need the following
mini displayport + toslink audio + usb to hdmi out 1) [url]
50ft hdmi cable 2) [url]
I heard 50feet is about the limit of HDMI for 1080p if you don't want to mess with amplifiers to correct signal lost.
I'm thinking about buying a mac mini to use with an HDTV as the primary screen. I've read some other posts regarding this. My question is, which method of hooking the setup up (i.e., which cables) provides the best picture. I've done this with a PC before but the connection was crumby... is this the case with the mac mini? Will I be able to get the same resolution that I can in a monitor? Also, I have looked at a ton of HDTVs and find the picture to be pretty bad compared to older TVs. Can anyone reccommend a model in the $500-700 range that has a good picture.
I have an iMac G4 800 mhz that I'd like to mirror to a 46" Samsung HDTV. I bought the Apple mini dv to both composite and s-video converter. When I plug it in, all I get is a scrambled version of what's on my mac.how to fix this and actually get video to transfer?
I'm wanting to hook up my 24" iMac (early 2009) to my 40" HDTV Sony Bravia [URL] so that i can use Plex or even front row to play my media through my TV and take advantage of the surround sound setup i have in my room. My questions are.
1. what cables/software do i need to achieve this? 2. is there any way that i can use my TV as a secondary monitor in a way that means i can run media off my iMac, through my TV set, whilst still being able to use my iMac for general tasks such as web browsing. or can i only have the TV mimmick exactly what is on my iMac screen?
I have a Sony Bravia 32 inch HDTV and would like to display movies downloaded to the iMac on the TV. TV has HDMI inputs as well as a USB socket. Can anyone tell me whether it is possible to achieve this aim?
I would like to hook up my mac to my HDTV but have NO idea how to do this. What cables or adaptors do I need? Is this easy? Is there a moron proof set of instructions somewhere?