OS X :: Can Time Capsule Be Used As A Repeater On An Existing Network
Jun 2, 2009Can Time Capsule be used as a repeater on an existing network ? Is there a way to use speakers with it and use airtunes with it ?
View 3 RepliesCan Time Capsule be used as a repeater on an existing network ? Is there a way to use speakers with it and use airtunes with it ?
View 3 RepliesI'm soon to start working from a shared office and my internet will be gained wirelessly from a shared router.As I cannot modify the wireless network as it will interfere with everyone else Can i simply attach my time capsule via ethernet direct to my macbook pro, so that it does all the backup goodness and yet still have my wireless internet conneection open.
MAC to TC wired with MAC to INTERNET Wireless Without interference.
I have a dual-band airport extreme router setup in a closet on the bottom floor of my 3-floor apartment, and I'm in need of some help figuring out how to go about adding some additional networking gear to my existing system
I have a 1TB Time Capsule which I'd like incorporate into my existing network. I have an available ethernet cable on the top floor of my apartment which I would like to connect the Time Capsule to so that I can quickly backup my MacPro (connected to network directly via ethernet), and so if possible I can extend the range of the Wireless-N network that my dual-band router is currently providing (because the signal on the top floor of my apartment isn't as great as I'd like it to be). I'd like to have the Time Capsule configured to only use the Wireless-N network so that my Macbook pro and my wife's Macbook Air will be backup to it via wireless-n speeds at all times.
I have a mixed Mac/PC environment - Macbook Pro (snow leopard); iMac 21 (leopard); 2 x Dell laptops (XP) - and an existing wifi network from a Belkin 8233-4 N modem/router. Also connected to the wifi network is a WHS for backing up the laptops; an HP printer; 2 iphones; an xbox 360; and a Wii.
I've just bought a 1TB Time Capsule to use to back up the Macs as my previous external time machine hard drive just died (which was connected via USB to the iMac).
At the moment, I've got the TC set up to join my existing wifi network (it's connected via an Ethernet cable from the Belkin wireless router), however I'm getting issues with the wifi network not working properly and being unable to connect to the internet. Every time you wake the Mac, you have to manually reconnect to the wifi (and sometimes even re-enter the password), and things work OK until the Mac goes back to sleep. When I go into the Airport utility, the settings say that the TC is set to create a new network, so I reset it back to join an existing network via ethernet, but then if I go back to these settings a little later (after having problems with the wifi connectivity), they have reverted back to create a new network !
What am I doing wrong ?
I've just joined a Time Capsule to my existing wifi network and it's working fine. However, if I try to connect a computer to the LAN port, I can't ping the TC. Is this by design?
View 2 Replies View RelatedI do like the concept of wireless routing/networking capabilities and integrated design of using Time Capsule w my new iMac 1tb HD (STILL not here yet), but am wondering if my 240gb WD HD is sufficient backup storage for the time being.
Maybe I can just spend the $300 for 500GB Time Capsule later on? Or should I just spend the $$$ and stop my sniveling? Once my iMac is delivered, should I take it to the Apple store and have them set it up, or is the setup easy enough for a Windows refugee to handle?
Please give me your feedback regarding this matter. Understand that I really have no wireless networking experience. Anyone whose read my previous threads will further understand that I'm currently a Mac Noob (virgin), and any elementary additional help is greatly appreciated.
I have just purchased a new Time Capsule but struggling to set it up in the most effective manner. I currently have a Belkin Wireless Router / Modem that I was using to provide me with internet connection and my home wireless network.
Now I have the TC, I want to use that for my home wireless network but I will need to still use my Belkin router / modem to provide me with the internet connection.
Is there a way I can disable the 'router' element of the belkin unit and just use it as a simple ADSL ethernet modem to connect to my TC and then let the TC set up the network?
I�m currently backing up my MacPro to a 250gb external drive via USB. I�m about to purchase an Apple Time Capsule 1TB to allow for backing up the additional HDs that I�ve installed in my MacPro. Can I just copy the existing TM folder from my external HD to the new Time Capsule and continue to do updated backups or do I have to start a new backup from the day I install the TC ?
View 15 Replies View Relatedmove my existent time machine back ups from a external USB hard drive to a WD MBLD network attached storage.
What I have tried to far: Created the a new time machine back up using the MBLDSelected the option to replace the existing time machine back up and selected the encrypt optionStarted a back upStopped it right after it started Turned the time machine offMounted the sparsebundleRemoved the backups.
backupdb folder from itAttached the old time machine disk to my macbook airCopied the backups.backupdb from there and tried to paste it on the NAS drive using Shift Option Command V.Got an error saying "the volume has the wrong case sensitivity for a backup"
I recently purchased a Time Capsule to use as a wireless hard drive. I connect to the internet both through wifi and ethernet to a educational network that does not allow extra routers, etc, to be added to the network, therefore I can not use the time capsule for this wifi.
I therefore want to connect to my early 2009 MBP17unibody to both the academic internet network for http/pop3/ftp/etc while simultaneously connecting to external hard drive to store data/itunes-library/etc.
I expect this has been asked before but I can't find any threads where it has. If anyone knows it would be highly helpful. I'd prefer to connect to both wirelessly but I could potentially put up with connecting to either or both with ethernet.
I have installed and have running a new Time Capsule. I would like to access files through the wireless network between two Apples and two PC's. At present the Apples are working wonderfully, however the PC running Windows 7 sees the network is unable to access it.
View 1 Replies View RelatedI just purchased a time capsule. I have wireless for free in my building which I do not have to pay for.
Can I just plug the time capsule into the wall and use it as a time machine?
How do I go about this and am I clear on what is going on.
I have my time capsule setup (green light and all). I can backup to it. I can access it and its folders from my new MBP. I can run the windows (and/or apple) Airport Utility and see and configure the TC within the utility but I cannot access it like a network drive on the XP box. I thought I saw somewhere to enter a workgroup name for PC networks but can't find it now.
View 6 Replies View RelatedSo i know if you enable wan sharing you can access your time capsule's drive outside your network by going to finder > GO > and typing in [URL]
But what if i am on a PC using windows which does not have afp, is there any way to access it then?
Is it possible to access my time capsule / airport extreme hard drive away from home? Like when Im at work? I do have a mobileme account, but cannot figure this out.
View 4 Replies View RelatedI'm trying to connect 2 airport expresses with my Time Capsule to get my music from itunes to reach into my backyard (well over 100' away). I can get the 2 airport expresses to "participate in WDS network" but the Time Capsule setup in airport utility does not give me that option. There is on "create a wireless network" and "extend a wireless network". Why am I not getting "participate in WDS network"
View 3 Replies View RelatedI have a time capsule (dual band,those introduced in2009 early). I'm trying to find the "allow guest network" but I can't seem to find anywhere this option.
View 6 Replies View RelatedI have a 1T time capsule. Right now my time capsule is connected to a modem/router from which i get my internet connection. But i wanted to connect my time capsule with a modem to get rid of the router(waste of space,small apartment). But from what i've read it seems that time capsule is awful when it comes to internet.
So what do you thing? Should i do it or not?Don't know if this is important but i have a 8mbps internet connection.
So I've been using a 1TB Time Capsule for a while now with my old HP and recently purchased a MacPro [15 inch base model]. My room mate has a recent model Macbook as well as an older iMac. We have a 50MBPS internet connection through our local ISP. More or less I am looking for advice on how to make sure our network is:
1. Secure.
2. Faster transfer speeds between all of our computers to and from the Time Capsule. [Where to find / adjust / optimize these settings]
3. Utilize our internet connection to it's fullest potential.
I am mostly concerned with my machine [optimizing it that is.] then the rest of the computers in the house. Go slow and use medium sized words as I am still wading into the world of Mac.
so I bought a time capsule on Friday along with a new mac thinking it would work super easy to set up, boy was I wrong.
I currently have my internet through virgin media with the modem and a wireless router(free from virgin) I also had an external drive but needed a new one so went for the time capsule.
so I take the cable from my router and plug into the time capsule, it powers on no bother go through the usual set up it says its connected but it will not work.
We just got new internet today. Our old internet was the built-in airport connecting to our slow hughesnet internet. Now I have an AT&T aircard that's fast, but has a 5 GB per month bandwidth limit. I just plug that into my USB, open the "sierra wireless watcher" application, and click connect. quit, and I'm good. Since it's not an airport network, how can I set up time capsule to find the network? I tried plugging the aircard into the USB of the time capsule, but I'm not sure if that works, or where to go in the airport utility once I do that. Will backing up my computer use up the bandwidth?
View 3 Replies View RelatedI begin uni next month and have been offered accommodation. My room won't have WiFi but will have a wired connection. I'm wondering, is it possible to - rather than connect my MacBook - connect the Time Capsule to this connection and create a wireless network? Also, is it simple to switch from one connection (my current WiFi at home) to another (the uni connection)? Finally, is it easy to switch from being connected via Ethernet to using WiFi (after initial backup for example)? The lack of WiFi would really be rubbish when I have an iPhone and Time Capsule.
View 6 Replies View RelatedI have a ADSL router wish is configured in bridging mode and I want to use my Time Capsule as router.
For some reason Time Capsule is complaining about my setup. I've tried all kinds of different settings but I haven't had much success.
The ADSL router must be configured correctly because I have a Netgear Wlan router wish works just fine with the same setup. The Netgear is to be replaced with the Time Capsule now.
I've been struggeling for hours and I'm out of ideas
So i searched everywhere i could to try and find an answer to this question, because i imagine at least someone on this planet is having this same problem, but i haven't found anything. so here i am, asking you:
Originally i had bought a Time Capsule 1TB and connected it to my internet modem and used it to create a network, then i had a AirPort express that i used solely for AirTunes to my stereo. So i had wireless backup for my MBP, N-Speed wireless internet for computer and iPhone and wireless music in my room, it was awesome.
but i just moved into a condo downtown that we are subleasing. The owner told me it had wifi so that was a selling point for me. but heres my problem, currently i have my TC and AirTunes on one network, for music and backups, but there is no ethernet connection in my condo, so i cannot directly connect it to the internet, so for internet i connect to the public wifi, and have to switch every time i want music in the living room, or want to back up., and i cant do either at the same time as i connect to the internet.
and i cannot extend the wifi in the building since it is not N. so i followed the instructions to connect my TC and AirPort to my existing WiFi, and to my knowledge, they will both connect as clients and be accessible all through my buildings WiFi. But, when i take them off their own network and connect them to the public wifi they just disappear and i have no way of finding them ever again through AirPort Utility unless i reset them.
so i was very troubled with this and it bothered me for ages, and i was just using 2 separate networks, but then i realized that every time a new client connects to the building's wifi it goes to a page where you must click 'ACCEPT" to the terms of use before having access to the network, so on my MBP i can open safari and click accept, but my TC and AirPort cannot click accept.
is this my problem? what do i need to do? can i connect for the first time to the network through ethernet from my MBP to the TC and turn off my wireless card in my mbp then click accept in safari on my mbp? or can i connect my mbp to the wifi and reset my MAC or IP address to the same as my TC or AirPort then click accept, that way the TC's and AirPort's IP and/or MAC are registered on the network and they can continue to connect without being asked to accept the ToU?
I have Time Warner cable and they told me that their high speed internet cable service comes with 2 IP addresses. Well, I have 4 computers. Now it was my understanding that only the router needed an IP address and the computers on the network access the internet via the router, i.e. 2 IP addresses should be more than enough. I have been trying to configure my time capsule to work with all of my computers with no success. Only 2 can access the internet. I Have a mac mini, 2 mac book pros and a pc.
View 2 Replies View RelatedAs of last tuesday, I haven't been able to get an internet connection using my Time Capsule on the Cox Cable network in Omaha, NE.
At first, Cox told me that this was my problem, and to take it up with Apple. Now they are telling me that no one with Time Capsules has been able to connect to their network for about a week. They say that they are working on it, but it isn't a priority because they "don't support routers."
Our company is currently running an Apple Time Capsule that has ~40 users wirelessly connecting to it. Now we recently opened up a new office space that will potentially have more than 50 users that need to connect to our network.
Seeing this we then purchased a Linksys WRT610N wireless router so that we can facilitate more than 50 wireless users. My question therefore is: how do we set this up so that the Linksys router connects to the TC so that we will subsequently be connected to the Internet as well as our network - no matter what SSID (TC or Linksys) we're on. I've been bearing about bridge modes and WAN ports but this is new to us so a brief explanation/procedure would be appreciated.
Keep in mind that we would like to keep the TC as our main router with the Linksys connected to that as well as increase the TC limit of the 50-user connectivity limit.
I finally got around to changing the way my wirless devices are set-up; instead of using time capsule as my wireless device, I went back to using the linksys wi-fi router (which I'd used prior to time capsule, but now set up as WPA2 if it makes a diff?) with the intent of putting time capsule in another room with my 1TB iTunes library hanging off it. All seemed to work well but I initially had a problem with the TV keep dropping the wi-fi connection. Now connected via ethernet to the linksys, no problem. iTunes streamed okay but I couldn't seem to get time machine to make a back-up - just prepared forever (overnight, still no joy).
So I noticed today that I seemed to have lost permissions on both iTime drive and time capsule. I managed to fix the iTunes drive by connecting direct to my macbook and running disk utility then adding myself again via sharing (hip hip for MRoogle), but I cannot do the same with the time capsule. Even with airport utility and connected via ethernet I can't even get the configuration up - just spins out until it throws an error. Anyone have any ideas as to what I'm doing wrong - I'm assuming it's me as this all worked in the previous set-up...
To date I've used an airport express as a wireless router for my macbook and macbook pro. Both have been manually backed up routinely on external hard drives. I use the macbook as my main media center/media storage and the hard drive is starting is nearly full. I'd like to set up a system where I move my media to an external hard drive and also automate the backup of the mb, mbp, and external hard drive. Would time capsule be the best approach for this and will it backup an external hard drive tied to its usb port. Alternatively, could I tie 2 external hard drives through a usb hub into airport extreme, using one for backing up the laptops and the other external drive?
View 5 Replies View RelatedI bought the new Time Capsule ready to take advantage of N network... but the Wireless PC card only recognizes the network type as Wireless-G... Did I do something wrong in setup? How can I adjust to enjoy under Wireless-N?
View 5 Replies View Related