I installed windows 7 through boot camp. I then installed the drivers from the originall leopard DVD and then i booted back up into OS X. But now i cant boot up into Windows i go to start up disks and the disk isnt there although the partion does show up in the desktop.
View 2 RepliesNaturally I had to restart my mac a few times, and nothing seemed out of the ordinary; everything performed as expected. Even played some counterstrike in windows before I rebooted back into osx.
A few hours later I tried booting back into windows, and it says there was an error and gives me the usual boot options (safe, last known working config etc etc). After I select one it begins to work, but after 5-10 seconds I get a bluescreen that lasts for a split second before rebooting. /repeat.
My windows 7 partition is totally intact, it's on my desktop and VMWare still boots into it fine. Holding option at startup does nothing and system preferences doesn't recognize it as a startup disk. I haven't touched my partition recently, the only significant thing I've done is install 10.6.5.
View 2 Replies View Relatedi have a problem with my new macbook pro wich arrived today.The problem happend after i installed bootcamp. After installing i rebooted the computer but after it rebooted nothing is happening. I cant get back to OSX and windows wont load because i havent installed it yet! When i boot i hear the normal sound, and i have a white screen clean. I have put in the OSX cd to try to reinstall OSX but it wont load, or i dont know how to.Now that the OSX cd is in there it wont eject it anymore.
View 12 Replies View RelatedHere's the problem. I'm trying to install Windows 7 Ultimate through bootcamp and the problem is, that when it restarts to boot and install from DVD, the screen goes black with the tickling white underscore and it won't load.
every time I start OSX, a box appears saying that the latest firmware for the EFI 1.4 or something has been successfully updated. Could it be related or is it something else?
Specs:
MacBook 5.1 , 2.4Ghz 13'
2Gb RAM DDR3
NVIDIA GeForce 9400M 256MB
firstly sorry if this has been asked before, I would search but I don't know the right words to search. basically I have just bootcamped windows 7 onto my 13" macbook and wondered if theres a way to have my macbook automatically ask me which OS to boot into each time I turn it on
View 2 Replies View RelatedI use mac os x 10.4.11 with bootcamp and install windows xp with sp2.
But now i can not boot into windows xp, i try from safe mode boot into.
but still can not.
When booting into windows, xp tell me need check disk and can not cannel check, when checking step1 is can normal finish but step2(indexs) can not go, it stop always at 0%.
The windows xp's filesystem is NTFS, in mac os x I can read all files in windows's disk, but can not delete or edit any file.
Is there some way can fix this problem?
2010 MacBook Pro 13'
Mac OS X Snow Leopard 10.6.4
Windows 7 Ultimate x64
Bootcamp 3.0.2
I'm trying to install Windows on my computer, and the install works fine, with no issues. On my very first boot into the desktop, everything looks OK. But when I reboot Windows, it freezes on "Installing device driver..." and then I have to press the power button to turn the computer off. I noticed that the device driver it's trying to install is "IEEE 1394". Then, when I restart my computer it freezes on the "Welcome" screen and I have to restart, only to be met with the same "Welcome" screen freeze every time. I have tried all 3 different "Safe Mode" options, burned several different Windows install discs and tried to repair my Windows install using the Windows DVD, but the repair program says that my Windows version isn't compatible with the disc version, even though it's the one I originally installed it with. I even saw in one thread that a guy fixed this same exact problem on his Mac by pressing the power button in anticipation just before the freeze. I tried that solution many times and it didn't work either. I also saw on another website some console commands I can use to try and resolve my issue, but if I cannot access a console, how am I supposed to use it?! I noticed that "Loading Driver C:System32DRIVERSCLASSPNP.SYS" hangs for quite some time before loading the welcome screen and crashing there. A few times I even notice that it would freeze on that process itself. Either way, I can't get into Windows. I've tried every solution I could find, and none of them worked at all. I'm really mad and sad right now because this is so frustrating. I just want to be able to get Windows on there so I can play my favorite games, use Office and work in Visual C++ Express Edition.
I installed Vista Business, bootcamp drivers, all necessary updates, etc. Since then, every time I reboot from Vista to Leopard, it stalls on the loading menu for 6-8 minutes, and when I finally get to the desktop the clock has been set back 7 hours. This also happens about 30% of the time when restarting from Leopard to Leopard. I spoke with Applecare, and they basically won't help me because they claim the problem is with Windows.
View 4 Replies View RelatedMacbook Pro 13" BootCamp Windows 7 Ultra Slow Booting Problem
[URL]
Video says it all...there is a strange "pause" for about 30 sec with blank screen before it really starts to load Windows....
I am having trouble booting up my windows 7 bootcamp, whenever i try to bootup it would give me some screen right after the windows logo and it'll say to repair or somthing, is this a common problem?
View 3 Replies View RelatedDoes anyone know if the Mac Pro will run bootcamp via
NewerTech MAXPower eSATA 6G PCIe 2.0 Controller Card
on startup
(using windows 7)
The boot of Windows 7 on my Macbook takes ages.
To solve this problem I've read that you have to install some thing: [URL]
I uninstalled boot camp, by restoring the drive using the BootCamp Assistant. Well... when I turn my computer on, and hold down option, it still gives 2 drives named "Windows" as a choice to boot to, even though they "don't exist." This really scared me when it tried to boot to one of those automatically after a restart, and it said that it could not load the operating system.
View 5 Replies View RelatedI am wondering if there is a way to have my iMac boot up in OS/X by default and if I want to use windows then use the hold down option method. So when I also come out of windows that it will go to OS/X without having to hold down the option key while I boot. Is this possible? If so how do I configure it?
View 2 Replies View RelatedThe Broadcom Wifi drivers which installed with Boot Camp 3.0 were version 5.10.38.26 dated 10/22/2008 and have better performance or at least a connection speed than the current Broadcom Wifi drivers that came with Boot Camp 3.1 which are version 5.60.18.8 dated 8/21/2009.
View 2 Replies View RelatedSo, I was on windows, using bootcamp, and I was creating partitions on a pen drive with it, and then it asks me that it needs to restart to apply changes.
But then, while restarting, a blue screen occurred (**** windows).... And I forced the shutdown pressing the power key.
Then, I simply turned the MacBook on, trying to boot on my snow leopard and I got a flashing folder with a question mark on it. Now I can't access any partitions on it, if I press option key on startup I get a blank window!
I tried to reset PRAM, repair the MacOs partition using the snow leopard DVD (it shows up fine, along with windows partition and EFI partition), and I still don't get my startup disk showing up...
Info:
MacBook Pro, Mac OS X (10.6.8), Snow Leopard with windows7 bootcamp
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
I want to try out Windows 7. During this process though I deleted my winXP partition. When I went to create a new BootCamp partition in The BootCamp SetUp Assisstant, it failed to create the partition on my harddrive.
I was greeted with the error, "BootCamp SetUp assistant failed to yada yada yada, please backup and reformat your harddrive."
So my question is do I really have to reinstall Mac OS X? (I backup with TimeMachine so it won't be a big deal but still thats a very long process.) Do you guys have any tips or anything to get Mac OS X to partition my main HDD?
I have an '08 Octo 2.8.
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
Maybe I'm just over thinking this, but Apple never posted a KB article about how to upgrade an existing bootcamp partition with the new snow leopard bootcamp 3.0 drivers. I'm assuming if you already have bootcamp 2.1 you boot up in boot camp and then insert the snow leopard disc in order to upgrade the drivers to 3.0 correct? Or do I have to erase my stupid bootcamp partition and reinstall it all over again using the new leopard boot camp assistant in order to get to 3.0?
View 11 Replies View RelatedI've just bought a copy of windows 7. Just wondering if i install it via bootcamp now can i update bootcamp in a few weeks when apple releases windows 7 support or will i have to reinstall windows 7 when that happens ?
View 3 Replies View RelatedA question about windows 7 and a Mac pro 3.1 edition 2008. I have installed windows 7 and all is fine and dandy everything works, except in the bottom right hand corner there the error flag showing on the tool bar.
This is the error.
Apple Memory Controller GPE event is not compatible with windows 7.
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
I've tried re-installing and updating every possible graphics related driver for Windows 7 i cannot for love or toffee get the bloody thing to even recognize my display. I am using a 26" tv as an external display, it works on OS X (very easily), windows XP (also very easily) and even Vista (also easily) and connecting through a DVI/HDMI connector. Why not windows 7? I've scoured the web for answers but can't find anything. Is anyone at least in the same boat as me? I really need this solved soon
View 1 Replies View RelatedIs there any way to get the wireless mighty mouse to work in windows 7 running via bootcamp tried to pair it but no luck.
View 7 Replies View RelatedDoes anyone know or have the same problem where pressing the F7, F8, F9 keys (which are previous, stop/pause, and forward) doesn't work in iTunes unless iTunes is the "active" window? I know that in OS X that if i pressed those buttons, it would do it even if I was in another application, but in the Windows 7 version it won't do it if another application is "active." Also, the same applies to the Apple Remote.
View 2 Replies View RelatedIf you set up boot camp with run windows and then also want to run windows with parallel, do you need two licenses of Windows to do this? Or can both programs access the same instance of Windows?
View 5 Replies View Relatedafter i get to the windows loading screen my mac just throws out a consistent high pitched sound and shows a black screen, i can only get into bootcamp windows when i unplug the computer and start it up with the running windows normally option. is this a virus?
View 7 Replies View Related