firstly sorry if this has been asked before, I would search but I don't know the right words to search. basically I have just bootcamped windows 7 onto my 13" macbook and wondered if theres a way to have my macbook automatically ask me which OS to boot into each time I turn it on
View 2 RepliesI am having trouble booting up my windows 7 bootcamp, whenever i try to bootup it would give me some screen right after the windows logo and it'll say to repair or somthing, is this a common problem?
View 3 Replies View RelatedNaturally I had to restart my mac a few times, and nothing seemed out of the ordinary; everything performed as expected. Even played some counterstrike in windows before I rebooted back into osx.
A few hours later I tried booting back into windows, and it says there was an error and gives me the usual boot options (safe, last known working config etc etc). After I select one it begins to work, but after 5-10 seconds I get a bluescreen that lasts for a split second before rebooting. /repeat.
My windows 7 partition is totally intact, it's on my desktop and VMWare still boots into it fine. Holding option at startup does nothing and system preferences doesn't recognize it as a startup disk. I haven't touched my partition recently, the only significant thing I've done is install 10.6.5.
View 2 Replies View Relatedi have a problem with my new macbook pro wich arrived today.The problem happend after i installed bootcamp. After installing i rebooted the computer but after it rebooted nothing is happening. I cant get back to OSX and windows wont load because i havent installed it yet! When i boot i hear the normal sound, and i have a white screen clean. I have put in the OSX cd to try to reinstall OSX but it wont load, or i dont know how to.Now that the OSX cd is in there it wont eject it anymore.
View 12 Replies View RelatedI installed windows 7 through boot camp. I then installed the drivers from the originall leopard DVD and then i booted back up into OS X. But now i cant boot up into Windows i go to start up disks and the disk isnt there although the partion does show up in the desktop.
View 2 Replies View RelatedHere's the problem. I'm trying to install Windows 7 Ultimate through bootcamp and the problem is, that when it restarts to boot and install from DVD, the screen goes black with the tickling white underscore and it won't load.
every time I start OSX, a box appears saying that the latest firmware for the EFI 1.4 or something has been successfully updated. Could it be related or is it something else?
Specs:
MacBook 5.1 , 2.4Ghz 13'
2Gb RAM DDR3
NVIDIA GeForce 9400M 256MB
I use mac os x 10.4.11 with bootcamp and install windows xp with sp2.
But now i can not boot into windows xp, i try from safe mode boot into.
but still can not.
When booting into windows, xp tell me need check disk and can not cannel check, when checking step1 is can normal finish but step2(indexs) can not go, it stop always at 0%.
The windows xp's filesystem is NTFS, in mac os x I can read all files in windows's disk, but can not delete or edit any file.
Is there some way can fix this problem?
2010 MacBook Pro 13'
Mac OS X Snow Leopard 10.6.4
Windows 7 Ultimate x64
Bootcamp 3.0.2
I'm trying to install Windows on my computer, and the install works fine, with no issues. On my very first boot into the desktop, everything looks OK. But when I reboot Windows, it freezes on "Installing device driver..." and then I have to press the power button to turn the computer off. I noticed that the device driver it's trying to install is "IEEE 1394". Then, when I restart my computer it freezes on the "Welcome" screen and I have to restart, only to be met with the same "Welcome" screen freeze every time. I have tried all 3 different "Safe Mode" options, burned several different Windows install discs and tried to repair my Windows install using the Windows DVD, but the repair program says that my Windows version isn't compatible with the disc version, even though it's the one I originally installed it with. I even saw in one thread that a guy fixed this same exact problem on his Mac by pressing the power button in anticipation just before the freeze. I tried that solution many times and it didn't work either. I also saw on another website some console commands I can use to try and resolve my issue, but if I cannot access a console, how am I supposed to use it?! I noticed that "Loading Driver C:System32DRIVERSCLASSPNP.SYS" hangs for quite some time before loading the welcome screen and crashing there. A few times I even notice that it would freeze on that process itself. Either way, I can't get into Windows. I've tried every solution I could find, and none of them worked at all. I'm really mad and sad right now because this is so frustrating. I just want to be able to get Windows on there so I can play my favorite games, use Office and work in Visual C++ Express Edition.
I installed Vista Business, bootcamp drivers, all necessary updates, etc. Since then, every time I reboot from Vista to Leopard, it stalls on the loading menu for 6-8 minutes, and when I finally get to the desktop the clock has been set back 7 hours. This also happens about 30% of the time when restarting from Leopard to Leopard. I spoke with Applecare, and they basically won't help me because they claim the problem is with Windows.
View 4 Replies View RelatedMacbook Pro 13" BootCamp Windows 7 Ultra Slow Booting Problem
[URL]
Video says it all...there is a strange "pause" for about 30 sec with blank screen before it really starts to load Windows....
Does anyone know if the Mac Pro will run bootcamp via
NewerTech MAXPower eSATA 6G PCIe 2.0 Controller Card
on startup
(using windows 7)
The boot of Windows 7 on my Macbook takes ages.
To solve this problem I've read that you have to install some thing: [URL]
I uninstalled boot camp, by restoring the drive using the BootCamp Assistant. Well... when I turn my computer on, and hold down option, it still gives 2 drives named "Windows" as a choice to boot to, even though they "don't exist." This really scared me when it tried to boot to one of those automatically after a restart, and it said that it could not load the operating system.
View 5 Replies View RelatedI am wondering if there is a way to have my iMac boot up in OS/X by default and if I want to use windows then use the hold down option method. So when I also come out of windows that it will go to OS/X without having to hold down the option key while I boot. Is this possible? If so how do I configure it?
View 2 Replies View RelatedThe Broadcom Wifi drivers which installed with Boot Camp 3.0 were version 5.10.38.26 dated 10/22/2008 and have better performance or at least a connection speed than the current Broadcom Wifi drivers that came with Boot Camp 3.1 which are version 5.60.18.8 dated 8/21/2009.
View 2 Replies View RelatedSo, I was on windows, using bootcamp, and I was creating partitions on a pen drive with it, and then it asks me that it needs to restart to apply changes.
But then, while restarting, a blue screen occurred (**** windows).... And I forced the shutdown pressing the power key.
Then, I simply turned the MacBook on, trying to boot on my snow leopard and I got a flashing folder with a question mark on it. Now I can't access any partitions on it, if I press option key on startup I get a blank window!
I tried to reset PRAM, repair the MacOs partition using the snow leopard DVD (it shows up fine, along with windows partition and EFI partition), and I still don't get my startup disk showing up...
Info:
MacBook Pro, Mac OS X (10.6.8), Snow Leopard with windows7 bootcamp
am new to the Mac world and just bought the Macbook Pro 13" 2.4GHz. I desperately need to run some Windows applications on the new Mac. Apart from knowing that Bootcamp can only run Windows or Mac at a time and Parallel allows switch between Windows and Mac, can anyone help me to decide which option I should go for please? In particular
View 4 Replies View RelatedShould I install Windows on my MacBook through BootCamp? Im not sure if I want it on my computer or not. Is it worth it? Should I leave my notebook how it is and not infect it with Windows?
View 1 Replies View Relatedi'm about to buy my first mac but unfortunately i need to use windows from time to time. So I am currently trying to figure out whether to go with virtulization or bootcamp.
So here is my question: Can OS X see the windows partition and if so can you move files without any problems?
Which do you prefer and why? I am going to be running one on the imac I am about to buy. I don't wanna fool with heavy burning on my MacBook, but I will get down to it on iMac. I have pretty much given up on finding a good decryption program for mac.. many headaches later I have decided to run something so I can use my windows programs to back up my dvd's.
When I put windows on mac, in theory I open it up to the same crap windows has viruses/spy-adware etc. What do you use to keep your mac safe and sound when running windows?
I know apple has said they will be available by the end of the year, but does anyone know when the bootcamp drivers for windows 7 will be available specifically?
View 3 Replies View Relatedi installed windows through bootcamp, but i think i changed the partition and picked the wrong way to format it without knowing. Now when i hold the option key, only a windows drive appears and no os x one.
How do i fix this, i dont mind if windows is gone entirely.
Has any one had any problems using an external display (Apple 24 inch LED is what I am using) with Bootcamp with an Apple laptop (recent MBP) in the closed lid position. I start Bootcamp & Windows, close the lid, but the display/computer won't restart once I plug in the peripherals.
View 2 Replies View RelatedI am trying to do a clean install of windows 7 using two upgrade disks (windows vista and windows 7) after windows vista was wiped from my hard drive when my hd crashed. I put in the windows vista disk after partitioning my hard drive (using only 5gb for windows side) and the disk cannot be recognized. It ends up trying to load for 20min then finally allows me to pop it back out. Can anyone direct me how to fix this and install windows using these two disks? My macbook pro is running snow leopard if that matters.
View 2 Replies View RelatedIn my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
Is this normal? I've tried changing the number of cores to use at startup as 2 and its a second faster....a second! Anyway, is it normal for it to take 1 minute 45 to start up? I didn't seem to take that long before but its suddenly started doing it.
EDIT: Just to point out, its the 2.53ghz, 4gb macbook pro with 250gb HDD
I'm having grief trying to create a new windows partition on my MCP. This is a similar problem to a million others that I've read on google, but slightly different and I cant get to the bottom of it. So, I had a 100GB hard drive running 10.5 and created a 20GB partition for XP. All good, all worked. But 20GB wasnt quite enough so I purchased a new 160GB drive and used Carbon Copy Cloner to create an exact copy of my OS X partition on the new drive. Removed old hard drive, installed new one and OS X runs like a dream still.
However, now I go to make my windows partition using bootcamp assistant and get the following error: "The startup disk cannot be partitioned or restored to a single partition. Back up the disk and use Disk Utility to format it as a single Mac OS. Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." Thing is, there is only one partition on my drive when I look in disc utility. I could just format the drive and restore using carbon copy cloner I guess, but I'd like to avoid that hassle.
when I lost my entire collection of PC games, I've gone through the process of making a .iso file of all of the games I've purchased. I have a few games in .iso files sitting on my mac desktop. For some reason, I cannot install Windows Vista on bootcamp anymore, as whenever I try to start up, I get an error saying something like the file "Wmilib" is missing or something, and I can't repair it using the startup disk no matter what. Which leads me to crossovers. I spent my money on it, and am hoping I didn't waste it. Whenever I tell Crossover to load from my mounted .iso file, and hit the "proceed" button, it takes me to the top drop-down menu, where it asks me to select a program to install.
The only problem is that I want to install from my mounted .iso file, and not from the list of supported programs, which is stupid. I've also tried just directly opening the "Setup.exe" file right with Crossover, and that still does nothing, which is very frustrating. Is it even possible to install games on crossover using a .iso file? And if so, what am I doing wrong, that whenever I hit "proceed" button it takes me right to the list of supported software and WON'T LET ME INSTALL without choosing one?
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
