I bought a used macbook that came with Leopard 10.5.8 I believe on it and I decided to delete the entire hard drive by going into disk utility and wiping it clean and then trying to install snow leopard like that... Unfortunately when I put the snow leopard install dvd in my macbook it is now not allowing me too install it saying "Mac OS X can't be installed on this computer - This disk requires that Mac OS X 10.5 or later already be installed on your computer" Then it gives me the option to restore from back up (which there is no back up as the hard drive was wiped out)
I was about to install Snow Leopard to my Macbook white 2.0 ghz with combo drive which I bought in 2007. I have Leopard installed. Is there anything I should know before I begin? I have an external HD with 160 left. Should I move important files there first?
I ran a file to export which converts to a quicktime .mov file.I expected these times but what's nice is that the fans on the MB kick in at full blast in 1 minute whereas the MBA full fans at 4 minutes full. Far less fan noise on the MBA! Looking at the temps, the MBA ran a full 11 degrees cooler the entire time. Fan noise is very important as I can now record voice from a usb mic without the fan noise being recorded as was the case with the Macbook.
Only downside is that the MBA takes longer (didn't time it) to cool down. Does anyone else have a longer than usual cool down time for the fans to go from full 6500 rpm to the norm 2500rpm?
I was one of the ("new converts") XP people who got Macs for the first time because of some very fabulous advertizing and Apple's image as a company with superior products. But after 1 year of using a Mac, I have come to believe that a computer is a computer is a computer.
Latest OS whether it is windows or OSX, would always have learnt something from its predecessors and competitors and in some extent would be better. Some new OS represent a big step forward (windows XP or leopard), others a small step (vista or snow leopard). Microsoft suffered because they took a small step forward with XP when Apple took a big step with leopard and now it is Apple's turn to suffer when Microsoft takes a big step with Seven vs. Apple's small step forward with SL.
I went for a better product switching to Mac at that time when time comes around for my next computer; it won't be a Mac just because I am a Mac user. It will be whichever is a better product at that time in both features and value. Whether it is a PC or a Mac, because a computer is a computer is a computer.
Am I the only person who feels ripped off by having to upgrade to lion so I can keep my "mobileme" account? My Mac is only 1 1/2 years old. I have now tried downloading lion for the 3rd time and have 72 hours devoted to trying to get the download completed. The 2nd ended with error [after 12 hours!].
ok, I was going to buy the new MB white. The thing is. Does anyone have benchmarks between having the ram at 667 MHZ ( MB white ), vs DDR3 1066 MHZ ( MB aluminum )
Currently I have a white iMac. It's the one that looks like the G5, but it's not a G5, because it has the iSight and an Intel processor. It's running Tiger. I want to upgrade to Snow Leopard. Would it run okay?
Here are the specs: Version 10.4.11 Processor: 2 GHz Intel Core 2 Duo Memory: 1GB 667 MHz DDR2 SDRAM
I've recently been experiencing regular White Screen of Death's on my MacPro Eight-core. It has been occuring for the past 5 days or so, with no apparent logical explanation (It has often happened whilst the machine is idling, but has also happened whilst I have been using it for various things). I've got a copy of the report, which I'll summarise below:Â
I want to white out a couple of lines on a PDF form. White out. No box lines, no shadows. White. As in those lines disappear. What is the deal with the shadows? Is there a way to just have parts of a doc whited out?
Info: iMac (21.5-inch Late 2009), Mac OS X (10.6.8)
So, with Snow Leopard, there is a 32-bit kernel, and a 64-bit kernel. Correct?
As I understand it, it will boot into the 32-bit kernel by default, but if your hardware is supported, you can select the 64-bit kernel.
My question is - where is the list of supported hardware, and how do you select the 64-bit kernel?
My confusion comes from several posts and various articles which all say the first-gen aluminium iMac has a 32-bit EFI, and therefore can only boot into the 32-bit kernel. But I've just downloaded an app called Startup Mode Selector, which shows you your system config, and it says I have a 64-bit EFI.
Why is my Snow Leopard OSX 10.6.8 IMac screen all white when I turn it on? There is no spiral and no Apple logo and the desktop does not appear. The screen is just white. Â
Prior to this, we had a wind storm in our area with some power glitches today. After one of them, the dock items disappeared and just the wallpaper was there. The colored spinner began going around when I clicked on the mouse but nothing was happening.  I unplugged it to try to reset it, but now the screen comes up all white, there's no apple logo that appears at start up and that's it. Now what should I do?
So I have a 1.8ghz dual G5 with 3gb of ram for work. I mainly work in Adobe CS and do a far amount of Photoshop work. At any given time I may have all of Adobe CS plus Office and a few other apps running -- and a gazillion fonts. Went to the store and saw the new 24" iMac. How would a new iMac compare to my late '04 1.8DP G5? On that same note, how would a new MacBook Pro compare to the above?
I have a white macbook which I purchased in 2007 ( it is the version that only goes to 2MB of Ram total). In anycase I have a Hard Drive that i want switch into it. The question I have is there any benefit to just reinstalling a fresh copy of Leopard vs using a cloning software (SuperDuper or Carbon Copy)? Here is why I ask:
I cant remember ever defragging the current drive ( if that possibility even exists in Leopard. I dont remember running any system tool like utility. I have basically kept computer on ( or on sleep) for the time Ive used it. It is the best computer i have ever had. It is VERY low maintainance.
So with that said....does cloning copy over every characteristic ( an fragmented drive...slowness {of which none really exists}....or the time to launch the OS when it is rebooted)?
With all of this said, I dont use this computer for much storage. I have a couple of MP3s on there which can be ported off of there with a USB flash drive....and a couple of documents. Everything else is pretty much expendable.
I dont know...something tells me that its just better to freshly install the OS.
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
I have a nvidia white macbook turning up in a few days, it's missing it's hard disk and install disks so I will need to use a retail edition of leopard.
I would like to know if there are any issues with doing so. Are the nvidia macbooks running a newer build of leopard?
I've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick, that I can see best behind an all white screen, i.e. a blank page of a word processing document.
I've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick,that I can see best behind an all white screen, i.e. a blank page of a word processing document.
Anyone seen anything like this before. I can actually see part of it right on the white of the page I am typing in this thread.
I'm looking for a new monitor to go with my MBP, and I'm stuck trying to choose between the ones listed above.
The 2407WFP is a couple of years old now I guess, but it's the rev A04 version, which supposedly fixed the (few) problems with what was otherwise meant to be a great screen. It's an sPVA screen.
I've heard good reviews of the G2410, with its LED backlighting. It's still a TN panel and I hear so much bad stuff about them.
The 2209WA is an eIPS panel which I like the sound of, but it's smaller and lower resolution.
The F2380 is a cPVA panel, the image quality looks better but I've heard bad things about blacks on this panel.
I have an imac with leopard OS and a macbook pro with snow leopard on it, and I can't seem to connect the two computers. Even when they are directly connected with ethernet cable, I can see the imac but not connect with it. I can connect to the macbook from the imac, but not vice-versa. My network is ethernet through linksys WRT610 router. Repeated attempts to connect from the macbook result in "connection failed" message and "imac may not exist or is not available."
I want the Mail Exchange Server support in Snow Leopard. If I buy a new MacBook today shipped with Leopard, can I get the upgrade from Leopard to Snow Leopard for free? (No, right?) When will SL be released? And how long will it take to have SL shipped with MacBook after that?
I'm trying to install Mac OS X Snow Leopard on to my macbook but I keep getting this error.
"mac os x installation couldn't be completed" I get this message usually within 5 minutes of installation.
My macbook specs are... Mac OS X Version 10.5.8, 2.16 GHz Intel Core 2 Duo, 1 GB 667 Mhz DDR2 SDRAM
I've already tried repairing the disks. (I repaired my leopard with the snow leopard CD because I couldn't find the leopard CD.
I heard it was fine to do.) I would have tried to verify and repair the partition but the buttons seemed to be grayed out for some reason.
Here is the error log...
[URL] (sorry for the download, forum rules. "the text that you have entered is too long (123483 characters). Please shorten it to 20000 characters long.")
I upgraded to Sow Leopard some time back. Recently took the 10.6.2 upgrade but to me it still feels as if the machine runs hotter in idle and under moderate load than it did with Leopard. Thinking about going back to Leopard.
What is your experiences with SL vs Leopard when it comes to heat?
Also battery life seems slightly worse to me is that also common?
I'm not a conspiracy theorist by any stretch of the imagination, but I've had a chain of events that leave me wondering what's going on:
First let me tell you my system: Dual G5 1.8GHz 3.5GB RAM.
Last year I could download and watch 1080i HD quicktime videos ( trailers from Apple's site ) without problems, playing at full resolution with no noticable frame dropping.
Then after a quicktime update ( don't remember which ), the performance fell down horribly to just a few frames a second for HD movies ( lower res videos still played fine ).
The next quicktime bumped up the performance back to something reasonable where I could at least "kind of" watch an HD trailer, but still there were sluggish points on most videos.
So last week I finally pony up for Leopard. Now I can watch 1080i trailers again without any problems and not a single frame drop that I notice.
What the heck??? Is this because of Leopard supposedly offloading some of the work to the video card? I think I read that it does that right?
I have actually noticed better performance all around with Leopard but most obvious is the graphics performance ( minimizing windows, dashboard, webpages etc ).
I have recently installed Snow Leopard on my aluminum Macbook . I dont have a lot of GB available, so I decided to reinstall Leopard and then install Snow Leopard again for more GB. I accidentally inserted the iMac install disk 1 (Not the Macbook install disk), because I have a iMac as a home computer. When I inserted the install disk, it tells me to restart my computer. I click Restart. But, after trying to boot, it comes up with the white screen. This lasts for about 15 seconds. After 15 seconds, my Macbook restarts again! It keeps repeating to restart over and over again. After about 15 restarts, I tried and ejected the disk and restarted my Macbook without the disk and see if it cancels the installation. When I boot it up with no disk, it cant read my HD anymore!
